Compaq AP500 User manual

Type
User manual

This manual is also suitable for

Professional Workstation AP500
Maintenance and Service Guide
Second Edition (March 1999)
Part Number 338534-002
Spares Part Number 338561-001
Compaq Computer Corporation
Notice
The information in this publication is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR
EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR
USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED “AS IS” AND COMPAQ
COMPUTER CORPORATION DISCLAIMS ANY WARRANTIES, EXPRESS, IMPLIED OR
STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE AND AGAINST
INFRINGEMENT.
This publication contains information protected by copyright. No part of this publication may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation.
1999 Compaq Computer Corporation.
All rights reserved. Printed in the U.S.A.
The software described in this guide is furnished under a license agreement or nondisclosure agreement.
The software may be used or copied only in accordance with the terms of the agreement.
Compaq, Compaq Insight Manager, ROMPaq, QVision, SmartStart, NetFlex, QuickFind, PaqFax,
registered United States Patent and Trademark Office.
Netelligent, SoftPaq, QuickBlank, QuickLock, and PowerStorm are trademarks and/or service marks of
Compaq Computer Corporation.
Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Other product names mentioned herein may be trademarks and/or registered trademarks of their respective
companies.
Compaq Professional Workstation AP500 Maintenance and Service Guide
Second Edition (March 1999)
Part Number 338534-002
Spare Part Number 338561-001
iii
Compaq Professional Workstation AP500 Maintenance and Service Guide
Contents
About This Guide
Text Conventions.......................................................................................................................vii
Symbols in Text........................................................................................................................viii
Symbols on Equipment.............................................................................................................viii
Where to Go for Additional Help...............................................................................................ix
Other Information Sources ..................................................................................................ix
Telephone Numbers.............................................................................................................ix
Chapter 1
Illustrated Parts Catalog
Mechanical Parts ......................................................................................................................1-1
System Components .................................................................................................................1-2
Spares Parts List.......................................................................................................................1-3
Chapter 2
Service Preliminaries
Compaq Technician Notes........................................................................................................2-1
Preliminary Warnings and Cautions.........................................................................................2-2
Electrostatic Discharge Information.........................................................................................2-3
Equipment Symbols..................................................................................................................2-3
Tools and Software Requirements............................................................................................2-4
Warranty Information...............................................................................................................2-4
Chapter 3
Removal and Replacement Procedures
Serial Number...........................................................................................................................3-1
Service Preparations.................................................................................................................3-2
Cable Lock ...............................................................................................................................3-3
Workstation Feet.......................................................................................................................3-4
Side Access Panel.....................................................................................................................3-5
Front Bezel...............................................................................................................................3-6
Blank Drive Bezel ....................................................................................................................3-7
EMI/Cooling Shield..................................................................................................................3-8
Speaker.....................................................................................................................................3-9
I/O Bracket Assembly ............................................................................................................3-10
Replacing the I/O Bracket Assembly...............................................................................3-11
Expansion Boards...................................................................................................................3-12
Identifying the PCI and ISA Expansion Slots..................................................................3-12
Removing a PCI or ISA Expansion Board ......................................................................3-14
Removing a Symbios Wide Ultra2 PCI SCSI Controller ................................................3-15
Removing the Accelerated Graphics Port (AGP) Graphics Controller............................3-16
Removing the Card Guide...............................................................................................3-17
Removing the Backplane Board......................................................................................3-18
System Fan.............................................................................................................................3-19
iv
Removal and Replacement Procedures continued
Mass Storage Devices.............................................................................................................3-21
Drive Positions................................................................................................................3-21
Hardware Screws.............................................................................................................3-23
CD-ROM Drive or DVD-ROM Drive.............................................................................3-24
Diskette Drive .................................................................................................................3-26
Removing a 7200 rpm Hard Drive from Bays 5 or 6.......................................................3-28
Removing a 10,000-rpm Hard Drive from Bays 5 or 6...................................................3-31
Removing the Fan from a Hard Drive Installed in Bays 5 or 6 ......................................3-35
Removing a Hard Drive from the Removable Hard Drive Cage.....................................3-37
Installing a Hard Drive in the Removable Hard Drive Cage ...........................................3-39
SCSI Cables and Guidelines...................................................................................................3-41
SCSI Cables.....................................................................................................................3-41
SCSI Guidelines for Installing SCSI Devices..................................................................3-42
SCSI Guidelines for Optimizing Performance ................................................................3-42
System Board Assembly.........................................................................................................3-43
System Board with Tray and Cage..................................................................................3-43
System Board Components..............................................................................................3-45
Dual Inline Memory Modules (DIMMs).........................................................................3-46
Important Guidelines for DIMM Installation ..................................................................3-46
Removing a DIMM.........................................................................................................3-47
Processor and Heatsink Assembly..........................................................................................3-48
Processor Power Module.................................................................................................3-49
Primary Processor Power Module Cable Insulator..........................................................3-50
External Battery......................................................................................................................3-51
Running Computer Setup ................................................................................................3-51
Installing the Battery.......................................................................................................3-52
Power Switch Cable Assembly...............................................................................................3-54
Power Supply..........................................................................................................................3-55
Chapter 4
Diagnostic Tools
Power-On Self-Test (POST).....................................................................................................4-2
POST Messages........................................................................................................................4-3
Troubleshooting Minor Problems.............................................................................................4-7
Power Problems.................................................................................................................4-8
Diskette Drive Problems....................................................................................................4-9
Display Problems ............................................................................................................4-10
Printer Problems..............................................................................................................4-11
Hard Drive Problems.......................................................................................................4-12
Hardware Installation Problems ......................................................................................4-13
CD-ROM Drive and DVD-ROM Drive Problems..........................................................4-14
Memory Problems...........................................................................................................4-15
SCSI Problems ................................................................................................................4-15
Network Problems...........................................................................................................4-16
Audio Hardware Conflicts...............................................................................................4-18
v
Compaq Professional Workstation AP500 Maintenance and Service Guide
Diagnostic Tools continued
Compaq Setup and Diagnostics Utilities.................................................................................4-19
Accessing the Compaq Utilities Menu ............................................................................4-19
Creating a Diagnostics Diskette.......................................................................................4-20
Computer Setup...............................................................................................................4-21
Computer Checkup (TEST).............................................................................................4-23
View System Information (INSPECT)............................................................................4-24
Managing a Diagnostics Partition....................................................................................4-25
Diagnostic Error Codes...........................................................................................................4-25
Microprocessor................................................................................................................4-26
Memory...........................................................................................................................4-27
Keyboard.........................................................................................................................4-27
Printer..............................................................................................................................4-28
Diskette Drive .................................................................................................................4-28
Serial Port........................................................................................................................4-29
Modem ............................................................................................................................4-29
Pointing Device...............................................................................................................4-29
CD-ROM Drive (IDE).....................................................................................................4-30
Tape Drive.......................................................................................................................4-30
Video...............................................................................................................................4-31
Audio...............................................................................................................................4-33
Network Interface............................................................................................................4-33
SCSI Error Codes...................................................................................................................4-34
Upgrading the ROM...............................................................................................................4-37
Local ROM Upgrade.......................................................................................................4-37
Remote ROM Flash.........................................................................................................4-38
FailSafe Boot Block ROM......................................................................................................4-39
Compaq Insight Manager .......................................................................................................4-41
Compaq Workstation SSD for Windows NT..........................................................................4-42
Remote Capability...........................................................................................................4-42
Silent Setup Command Line Interface.............................................................................4-42
Compaq Diagnostics for Windows NT...................................................................................4-43
Chapter 5
System Security
Security Features......................................................................................................................5-1
Password Security .............................................................................................................5-2
Windows NT Workstation Password.................................................................................5-6
National Keyboard Delimiter Characters ..........................................................................5-6
Advanced Security Management..............................................................................................5-7
Re-enabling Diskette Boot or Diskette Write....................................................................5-7
Re-enabling a Serial Port or Parallel Port..........................................................................5-8
QuickLock/QuickBlank.....................................................................................................5-8
Cable Lock Provision........................................................................................................5-9
vi
Chapter 6
Jumper and Switch Information
Battery Jumpers........................................................................................................................6-2
Switch Settings.........................................................................................................................6-3
Hard Drives..............................................................................................................................6-4
32X Max CD-ROM Drive (IDE)..............................................................................................6-4
PowerStorm 300/AGP Graphics Controller..............................................................................6-5
Chapter 7
Physical and Operating Specifications
System Unit..............................................................................................................................7-2
325W Power Supply.................................................................................................................7-7
Diskette Drive...........................................................................................................................7-8
Zip Drive..................................................................................................................................7-9
CD-ROM Drive......................................................................................................................7-10
DVD-ROM Drive...................................................................................................................7-12
Hard Drives............................................................................................................................7-14
Audio System .........................................................................................................................7-19
Keyboard................................................................................................................................7-19
Mouse.....................................................................................................................................7-20
Graphics Controllers...............................................................................................................7-21
Network Controller.................................................................................................................7-25
RJ-45 Network Cable Specifications......................................................................................7-25
Chapter 8
External Connectors
Physical Location .....................................................................................................................8-1
Pin Assignments.......................................................................................................................8-3
Index
vii
Compaq Professional Workstation AP500 Maintenance and Service Guide
About This Guide
This guide is designed to be used as step-by-step instructions for installation, and as a reference for
operation, troubleshooting, and future upgrades.
WARNING: Only authorized technicians trained by Compaq should attempt to
repair this equipment. All troubleshooting and repair procedures are detailed to
allow only subassembly/module level repair. Because of the complexity of the
individual boards and subassemblies, no one should attempt to make repairs at
the component level or make modifications to any printed wiring board. Improper
repairs can create a safety hazard. Any indications of component replacement or
printed wiring board modifications may void any warranty.
WARNING: To reduce the risk of personal injury from electrical shock and
hazardous energy levels, only authorized service technicians should attempt to
repair this equipment. Improper repairs could create conditions that are
hazardous.
IMPORTANT: The installation of options and servicing of this product should be performed
by individuals that are knowledgeable of the procedures, precautions, and hazards
associated with equipment containing hazardous energy circuits.
Text Conventions
This document uses the following conventions to distinguish elements of text:
Keys Keys appear in boldface. A plus sign (+) between two
keys indicates that they should be pressed simultaneously.
USER INPUT User input appears in a different typeface and in
uppercase.
FILENAMES File names appear in uppercase italics.
Menu Options,
Command Names,
Dialog Box Names
These appear in initial capital letters.
COMMANDS,
DIRECTORY NAMES,
and DRIVE NAMES
These always appear in uppercase.
Type When you are instructed to type information, type the
information without pressing the Enter key.
Enter When you are instructed to enter information, type the
information and then press the Enter key.
viii
Symbols in Text
These symbols may be found in the text of this guide. They have the following meanings.
!
WARNING: Indicates that failure to follow directions in the warning could result in
bodily harm or loss of life.
CAUTION: Indicates that failure to follow directions could result in damage to
equipment or loss of information.
IMPORTANT: Presents clarifying information or specific instructions.
NOTE: Presents commentary, sidelights, or interesting points of information.
Symbols on Equipment
These icons may be located on equipment in areas where hazardous conditions may exist.
Any surface or area of the equipment marked with these symbols
indicates the presence of electrical shock hazards. Enclosed area
contains no operator serviceable parts.
WARNING: To reduce risk of injury from electrical shock hazards, do
not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a Network
Interface Connection.
WARNING: To reduce risk of electrical shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors
into this receptacle.
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
ix
Compaq Professional Workstation AP500 Maintenance and Service Guide
Where to Go for Additional Help
Major sources of additional information are listed below.
Other Information Sources
In addition to this guide, the following information sources are available:
User Documentation
Compaq Service Quick Reference Guide
Service Training Guides
Compaq Service Advisories and Bulletins
Compaq QuickFind
Compaq Insight Manager
Compaq Download Facility: Call 1-281-518-1418.
Telephone Numbers
For the name of your nearest Compaq Authorized Reseller:
In the United States, call 1-800-345-1518.
In Canada, call 1-800-263-5868.
For Compaq technical support:
In the United States and Canada, call 1-800-OK-COMPAQ (For continuous quality improvement,
calls may be recorded or monitored.)
For Compaq technical support phone numbers outside the United States and Canada, visit the
Compaq website at:
www.compaq.com
1-1
Compaq Professional Workstation AP500 Maintenance and Service Guide
Chapter 1
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a reference for spare parts for the
Compaq Professional Workstation AP500.
Mechanical Parts
6
9
11
2
100
24
1
10
12
49
100
4 98
Figure 1-1. Exploded view of the Compaq Professional Workstation AP500 mechanical parts
1-2 Illustrated Parts Catalog
System Components
13
66
16
17
14
19 20
8
11
26
42
33
7
32
98
23
3
50
52
22
51
74
5
44 45
87
Figure 1-2. Exploded view of the Compaq Professional Workstation AP500 system components
1-3
Compaq Professional Workstation AP500 Maintenance and Service Guide
Spares Parts List
Parts or components marked with an asterisk (*) are not illustrated.
Table 1-1
Compaq Professional Workstation AP500
Spares Parts List
Reference Description Spares Part #
MECHANICAL
1 Side Access Panel 329263-001
2 Front Bezel 338549-001
3 I/O Bracket (Expansion Board Assembly) 338563-001
4 Blank Drive Bezel (part of the Miscellaneous Plastic Kit) 329265-001
5 Backplane Board 338513-001
6 Hood 338565-001
7 Removable Hard Drive Cage 338557-001
8 Speaker 328730-001
9 EMI/Cooling Shield (part of the Miscellaneous Hardware Kit) 338559-001
10 Workstation Feet 329264-001
11 Chassis 338547-001
SYSTEM
12 System Fan (fan bracket included in Miscellaneous Hardware Kit) 338558-001
13 Power Supply, 325W 328563-001
14 System Board with Tray 400-, 450-, 500-MHz 402124-001
15 System Board with Tray 400-, 450-MHz 338548-001*
16 Intel Pentium II Processor, 400/100 MHz, 512K with heatsink 327648-001
17 Intel Pentium II Processor, 450/100 MHz, 512K with heatsink 328785-001
18 Intel Pentium III Processor, 500/100 Mhz, 512K with heatsink 116402-001*
19 Processor Power Module (Voltage Regulator Module)
For 350/400/450/500 MHz CPU
329267-001
20 Processor Power Module (Voltage Regulator Module)
For 350/400/450 MHz CPU
327660-001
21 Lock Security Bracket 199109-001*
Continued
1-4 Illustrated Parts Catalog
Compaq Professional Workstation AP500 Spares Parts List
Continued
Reference Description Spares Part #
22 External Battery 160274-001
23 Expansion Board Slot Cover 141081-001
24 Power Switch and LEDs with Cable 329270-001
MEMORY
25 32-MB Memory Module (Registered 100-MHz SDRAM) 317747-001*
26 64-MB Memory Module (Registered 100-MHz SDRAM) 317745-001
27 128-MB Memory Module (Registered 100-MHz SDRAM) 317756-001*
28 256-MB Memory Module (Registered 100-MHz SDRAM) 317749-001*
MASS STORAGE
29 4.3-GB Wide Ultra2 SCSI Hard Drive 7200 rpm 349533-001*
30 4.3-GB Wide Ultra2 SCSI Hard Drive 10,000 rpm 386538-001*
31 9.1-GB Wide Ultra2 SCSI Hard Drive 7200 rpm 349534-001*
32 9.1-GB Wide Ultra2 SCSI Hard Drive 10,000 rpm 386539-001
33 18-GB Wide Ultra2 SCSI Hard Drive 10,000 rpm 386540-001
34 4.3-GB Wide-Ultra SCSI Hard Drive, 7200 rpm 339514-001*
35 4.3-GB Wide-Ultra SCSI Hard Drive, 10,000 rpm 336383-001*
386539-001*
36 9.1-GB Wide-Ultra SCSI Hard Drive 7200 rpm 339515-001*
37 9.1-GB Wide-Ultra SCSI Hard Drive 10,000 rpm 336384-001*
38 18-GB Wide-Ultra SCSI Hard Drive 10,000 rpm 336385-001*
39 6.4-GB Ultra ATA Hard Drive 166973-001*
40 10-GB Ultra ATA Hard Drive, 7200 rpm 330520-001*
41 Symbios Wide Ultra2 PCI SCSI Controller 114009-001*
42 1.44-MB Diskette Drive 179161-001
43 100-MB Zip Drive 401624-001*
44 32X Max CD-ROM Drive (IDE) 327659-001
45 DVD-ROM Drive 105771-001
46 12/24-GB DAT Drive 340593-001*
Continued
1-5
Compaq Professional Workstation AP500 Maintenance and Service Guide
Compaq Professional Workstation AP500 Spares Parts List
Continued
Reference Description Spares Part #
47 4/8-GB SLR Drive 340591-001*
48 Hard Drive Mounting Bracket (Bays 5 and 6) 243231-001*
49 Fan and Cable for >7200 rpm Hard Drives Installed in Bay 5 or 6 329266-001
CABLE KITS
50 Miscellaneous Signal Cable Kit (CD-ROM Drive, HD, Diskette, Audio) 327649-001
51 SCSI cable, wide 338546-001
52 Wide Ultra2 SCSI cable 402222-001
53 SCSI adapter, 50- to 68-Pin (internal) 189638-001*
KEYBOARD AND MOUSE
54 Keyboard 269513-001*
55 3-Button Mouse 327716-001*
MONITOR
56 P75 Monitor 307815-xxx*
57 V75 Monitor 307713-xxx*
58 V90 Color Monitor 305602-xxx*
59 P900 Color Monitor 303502-xxx*
60 P1610 Monitor 305710-xxx*
61 P110 Monitor 284959-xxx*
62 TFT 5000:
Opal, TS, NA, TC099
Carbon, TS, NA, TC099
115714-001*
115712-001*
63 TFT 8000:
Opal, no protective panel, TC095, WW
Opal, with protective panel, TC095, WW
Carbon, no protective panel, TC095, WW
Carbon, with protective panel, TC095, WW
307911-001*
102358-B24*
102359-B24*
102356-B24*
64 TFT 450:
Order TFT 450 spare part from the TFT 450 guide
(PN 170431-001)*
65 TFT 500:
Order TFT 500 spare part from the TFT 500 guide
(PN 285012-001)*
Continued
1-6 Illustrated Parts Catalog
Compaq Professional Workstation AP500 Spares Parts List
Continued
Reference Description Spares Part #
GRAPHICS
66 GLoria Synergy+ Graphics Controller 4-MB (AGP) 327599-001
67 GLoria Synergy+ 4-MB Memory Upgrade 327600-001*
68 GLoria Synergy+ 8 MB (PCI) Graphics Controller 298796-001*
69 PowerStorm 300 Graphics Controller (AGP) 338539-001*
70 Matrox Millennium G200 Graphics Controller 294409-001*
71 Matrox Millennium G200 8-MB Memory Upgrade 386047-001*
72 Matrox Productiva G100 Multi-Monitor Series Graphics Controller 101239-001*
CONTROLLERS
73 Compaq SMART-2SL Array Controller 242777-001*
74 Dual-Channel SCSI Controller 295626-001*
COMMUNICATIONS
75 Netelligent 16/4 TR PCI IBM UTP/STP Controller 301210-001*
76 Netelligent 16/4 TR PCI UTP/STP Controller 268010-001*
77 Netelligent 10 T/2 PCI UTP/Coax Controller 292857-001*
78 Netelligent 10 T/2 ISA UTP/Coax Controller 265618-001*
79 Netelligent 100 FDDI PCI SAS Fiber-SC 242506-002*
80 Netelligent 100 FDDI PCI DAS Fiber-UTP 242506-003*
81 Netelligent 100 FDDI PCI SAS Fiber-UTP 242506-004*
82 Netelligent 100 FDDI PCI SAS Fiber-MIC 242506-005*
83 Netelligent 56K PCI Fax Modem 321510-B21*
84 Netelligent 56K ISA Fax Modem 294912-001*
85 Compaq Fast Ethernet NIC NC3122 317453-001*
86 Compaq Fast Ethernet NIC NC3120 317606-001*
87 Compaq Ethernet NIC NC1120 317358-001
88 Compaq Fast Ethernet NIC NC3161 323556-001*
Continued
1-7
Compaq Professional Workstation AP500 Maintenance and Service Guide
Compaq Professional Workstation AP500 Spares Parts List
Continued
Reference Description Spares Part #
SOFTWARE
89 Magellan Driver CD 297863-001*
90 Spaceball Driver CD 298033-001*
91 Microsoft Windows NT Workstation 4.0 CD 275573-xxx*
92 Compaq SmartStart for Workstations CD 275574-xx3/xx2(SP)*
93 Systems ROMPaq 275595-001*
94 Compaq Setup and Compaq Diagnostics for Workstations Diskette 275575-xxx*
MISCELLANEOUS
95 Magellan 3D Pointing Device (spacemouse) 297645-001*
96 Spaceball 3D Pointing Device 297644-001*
97 Compaq Multimedia Sound System (US) 294122-xxx*
98 Miscellaneous Plastic Kit (includes baffles*, card guide and
blank drive bezel)
329265-001
99 Heatsink Bridge 327658-001*
100 Miscellaneous Hardware Kit (includes EMI/Cooling Shield and System Fan
Bracket)
338559-001
101 Rack Mounting Kit 338556-001*
102 Shipping Box with Buns (US) 329268-001*
103 Shipping Box with Buns (INTL) 329268-002*
104 SCSI Adapter, 68- to 50-Pin (external) 270229-001*
DOCUMENTATION
105 Maintenance and Service Guide 338561-001*
106 Illustrated Parts Map 338560-001*
107 Service Quick Reference Guide (revision -038 or later) 162212-001*
2-1
Compaq Professional Workstation AP500 Maintenance and Service Guide
Chapter 2
Service Preliminaries
This chapter identifies the following service considerations:
Preliminary warnings and cautions
Electrostatic discharge information
Equipment symbols
Tools and software requirements
Warranty information
IMPORTANT: Adherence to the procedures and precautions described in this chapter is
essential for proper service.
Compaq Technician Notes
WARNING: To reduce the risk of personal injury from electrical shock and
hazardous energy levels, do not exceed the level of repair specified in these
procedures. Because of the complexity of the individual boards and
subassemblies, do not attempt to make repairs at the component level or make
modifications to any printed wiring board. Improper repairs could create conditions
that are hazardous.
WARNING: To reduce the risk of electric shock or damage to the equipment:
Disconnect power from the computer by unplugging the power cord from either
the electrical outlet or the computer.
Do not disable the power cord grounding plug. The grounding plug is an important
safety feature.
Plug the AC adapter or power cord into a grounded (earthed) electrical outlet that
is easily accessible at all times.
CAUTION: To properly ventilate the system, you must provide at least 6 inches
(15 cm) of clearance at the front of the workstation and 3 inches (7.6 cm) at the
back.
IMPORTANT: Any indication of repair at the component level or modification of a printed
wiring board may void any warranty.
2-2 Service Preliminaries
Preliminary Warnings and Cautions
The following should be noted when operating or servicing the Compaq Professional
Workstation AP500:
WARNING: To reduce the risk of electric shock or damage to the equipment:
Disconnect power from the system by unplugging all power cords
from either the electrical outlet or the Compaq Professional
Workstation AP500.
Do not disable the power cord grounding plug. The ground plug is
an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that
is easily accessible at all times.
WARNING: To reduce the risk of personal injury from hazardous energy levels,
only authorized service technicians should attempt to repair this equipment.
Because of the complexity of the individual boards and subassemblies, no one
should attempt to make repairs at the component level or to make modifications to
any printed wiring board. Improper repairs can create a safety hazard.
CAUTION: The power supply in the Compaq Professional Workstation AP500 has
an auxiliary power section. This section is always active as long as the unit is
plugged into a live AC outlet. Be sure to turn off the switch and unplug the power
cord before performing any service work.
CAUTION: To properly ventilate the system, you must provide at least 6 inches
(15 cm) of clearance at the front of the workstation and 3 inches (7.6 cm) at the
back.
IMPORTANT: Any indications of component replacement or printed wiring board
modifications may void any warranty.
2-3
Compaq Professional Workstation AP500 Maintenance and Service Guide
Electrostatic Discharge Information
A discharge of static electricity can damage static-sensitive devices or micro-circuitry. Proper
packaging and grounding techniques are necessary precautions to prevent damage. To prevent
electrostatic damage, observe the following precautions:
Transport products in static-safe containers (conductive tubes, bags, or boxes).
Keep electrostatic-sensitive parts in their containers until they arrive at static-free stations.
Cover workstations with approved static-dissipating material. Provide a wrist strap
connected to the work surface and properly grounded tools and equipment.
Keep work area free of non-conductive materials such as ordinary plastic assembly aids
and foam packing.
Be sure you are always properly grounded when touching a static-sensitive component or
assembly.
Avoid touching pins, leads, or circuitry.
Always place drives PCB assembly-side down.
Use conductive field service tools.
Equipment Symbols
The following symbols are located on applicable components of the workstation and should be
observed when servicing the workstation to avoid personal injury or damage to the components:
WARNING: Any surface or area of the equipment marked with these
symbols indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists. To reduce risk of
injury from a hot component, allow the surface to cool before touching.
WARNING: Any surface or area of the equipment marked with these
symbols indicates the presence of electrical shock hazards. Enclosed
area contains no operator serviceable parts. To reduce risk of injury from
electrical shock hazards, do not open this enclosure.
WARNING: Any RJ-45 receptacle marked with these symbols
indicates a Network Interface Connection. To reduce risk of electrical
shock, fire, or damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.
2-4 Service Preliminaries
Tools and Software Requirements
To service the workstation, you might need:
Torx T-10 screwdriver
Torx T-15 screwdriver
Flat-blade screwdriver
Compaq Setup and Diagnostics Utility
IMPORTANT: Prior to servicing the workstation, be sure the drivers from the latest Compaq
Workstation SSD for Windows NT are installed. See Chapter 4 for installation procedures.
Warranty Information
The following warranties come standard with the workstation:
Standard Warranty—a three-year limited warranty that covers three years on parts, one
year on labor carry-in, and one year of onsite service
Pre-Failure Warrantya special warranty that extends the Compaq three-year limited
warranty by applying it to critical system components before they fail. This warranty
ensures that when you receive notification of a pre-failure condition through Compaq
Insight Manager or the Windows NT Event Log, the component is replaced under
warranty.
NOTE: For more information about Compaq Insight Manager, see Chapter 4.
The Pre-Failure Warranty covers the following workstation components:
SCSI hard drives
Error Correcting Code (ECC) memory
Pentium II processor
Pentium III Processor
In addition to the above warranties, an optional Extended Warranty is available. If purchased,
this warranty extends the Standard Warranty’s one year coverage for labor and onsite service for
two additional years.
IMPORTANT: Observe all warnings and cautions provided herein. Failure to do so may
void warranty for damaged components.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179

Compaq AP500 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI