A - 4mm Hex L-Wrench x 1
C - Rubber Stem Bumpers x 2
B - 1/4-20 x 5/8"
Machine Screw x 19
Black Color
G - Handles x 3
H - M4 x 37mm Screw x 6
SEQUEL
Designed by Matthew Weatherly
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
6014 3-Drawer Cabinet Rev: 08-02-2011
Component List
SEQUEL 6014 3-Drawer Cabinet is engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com.
For all other concerns, please contact your BDI Retailer.
6014 3-Drawer Cabinet
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [email protected]
Placement and Maintenance
SEQUEL 6014 3-Drawer Cabinet is designed for indoor use on level floors. Clean glass with glass cleaner, and wood veneer
with a moist cloth.
D - Cabinet Assembly x 1
E - Base Legs x 2
F - Glass Top x 1
C
F
D
E
B
G
H
B
SEQUEL
6014 3-Drawer Cabinet
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 1
Attach Legs (E) to Cabinet (D) using Screws (B)
and tighten with
Hex Wrench (A).
Step 2
Install Rubber Stem Bumpers (C) into holes
in rear of top panel of
Cabinet (D).
E
B
A
C
C
D
D
E
SEQUEL
6014 3-Drawer Cabinet
ASSEMBLY INSTRUCTIONS
3
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 3
Attach Glass Top (F) to Cabinet (D) using Screws (B)
and tighten with
Hex Wrench (A).
Step 4
Attach Handles (G) to drawer fronts using Screws (H)
and tighten using Phillips Screwdriver (not provided).
F
F
D
D
A
H
G
B
A
Top Drawer removed for clarity
Glass can be installed without removing drawer.
/