Cpvqp1Dcwgt"Kpe0."36"Rtqitguu"Ftkxg."Ujgnvqp."Eqppgevkewv"286:6"WUC"ß"*425+";4;/3322"ß"Hcz"*425+";47/6;::"ß"uwrrqtvBcpvqpdcwgt0eqo"
Gwtqrg."D0X0"Gwtqfg"Dwukpguu"Egpvgt."Gwtqfg/Rctm"3/4."8683"MD"Mgtmtcfg."Vjg"Pgvjgtncpfu"ß"*-53+"67"785;442"ß"Hcz"*-53+"67"785;444"ß"gwtquwrrqtvBcpvqpdcwgt0eqo"
Singapore Office - Anton/Bauer, 6 New Industrial Road, # 02-02 Hoe Huat Ind. Bld., Singapore 536199 • (+65) 62975784 • Fax (+65) 62825235
yyy0cpvqpdcwgt0eqo"
7595-0176 Rev E
1." Remove the Q-X2 Gold Mount
®
from the camera/camcorder.
2." Disconnect the 2 pin connector from the camera/camcorder.
3." Install the JVC-BP using the (4) 3mm Flat Head screws provided.
4." Re-connect the 2 pin connector removed in step #2.
5." Re-attach the Q-X2 Gold Mount to the camera using the supplied (4) 6-32 x 5/8 Flat Head Screws.
"5oo"Hncv"Jgcf"Uetgyu"
"SV[<"6"
%8/54"Hncv"Jgcf"Uetgyu"
SV[<"6
LXE/DR"
Kpuvcnncvkqp"Kpuvtwevkqpu"
LXE/DR
C
97;7/2398 """Tgx"G
FC/G973"""""""""""""Ujv""3"qh""4
Crrtqxcnu"
"
Ctvym"Fgukip"
Uwrrnkgt"
E0"Q‚PGKNN""419135"
"
Cpvqp1Dcwgt"
"
"
"
"
"
Ftchvgf"D{"
"
V0"FGUTQUKGTU"
417135"
"
"
"
"
"
Ejgemgf"D{"
"P1C"
ApprovedCopy
"
""
Cxckncdng"Ugrctcvgn{"
YTD/3:7"cpf"YTD/422"
Hqt"Nguvtqpkeu"Uv{ng"Tgegkxgtu"
CDYOM/MKV"
Wpkxgtuc n" Oqw pvk pi"Rncvg"hq t " Yktg n gu u" Tg eg kx g tu"
ß"Allows user to use the same Wireless Receiver Plate for ALL Anton/Bauer
®
Batteries.
• Allows a Receiver to be mounted on either the side of the Battery, behind the Battery, or
both.
• Will accomodate WRB-185 and WRB-200 Wireless Receiver Compartments.
ß"Attaches directly to any Anton/Bauer
Wireless Receiver Plate.
• Able to “Piggy-Back” multiple
Compartments.
WRB-185: Fits CR-175, CR-185, CR-187
and UCR-190 style Receivers
WRB-200: Fits UCR-195, UCR-195D,
UCR-200D, UCR-205D, and
UCR-210D style Receivers
C
97;7/2398 """Tgx"F
FC/G973""""""""""""""Ujv""4"qh""4
ApprovedCopy
/
