315
TRACK LIGHTING Raceway
COOPER LIGHTING
HALO
®
L900 Outlet Box Cover
Can be used at any electrical feed connection
point (Live, Straight, L, T or X). Size: 5” sq.
Screws included.
Finishes: White (P), Black (MB)
L913 Straight Connector
To connect two track sections end-to-end. May
be used as feed point.
Finishes: White (P), Black (MB)
L914L L Connector
To connect two track sections at left-hand
90° angle. Outside ground. May be used as feed
point.
Finishes: White (P), Black (MB)
L915L T Connector
To connect three track sections into a left-hand T
configuration. Grounds matched to L915R for
grid system. May be used as feed point.
Finishes: White (P), Black (MB)
L981 Conduit Adapter
Designed to accept standard 1/2” trade size
conduit fitting (not supplied). Use when feeding
to surface mount Raceway trac through surface
conduit system.
Finishes: White (P), Black (MB)
L994 45° Pendant Adapter
For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992 and L993.
Finishes: White (P), Black (MB)
L911 Live End Connector
To start a run.
Finishes: White (P), Black (MB)
L914R L Connector
To connect two track sections at a right-hand
90° angle. Inside ground. May be used as
feed point.
Finishes: White (P), Black (MB)
L915R T Connector
To connect three track sections into a right-hand
T configuration. Grounds matched to L915L for
grid system. May be used as feed point.
Finishes: White (P), Black (MB)
L916 X Connector
To connect four track sections into a cross
configuration. May be used as feed point.
Finishes: White (P), Black (MB)
L984 T-Bar Attachment Clip
Allows surface mount Raceway Trac to be
attached to inverted tee ceiling. Order as follows:
2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac
and 4 kits for 12’ Trac.
L993 Pendant Kit Assembly
To suspend track from ceiling. Order as follows: 2
kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac;
and 4 kits for 12’ Trac. Includes one 18” threaded
steel stem, canopy and mounting hardware.
Finishes: White (P), Black (MB)
L48 48” Steel Stem
L993 can be field cut and threaded.
Finishes: White (P), Black (MB)
DE611 Dead End
Replacement Dead Ends for Raceway Track (6
included)
Finishes: White (P), Black (MB)
/
