335
TRACK LIGHTING System
COOPER LIGHTING
NOTE: Unless otherwise stated, Lazer
connectors are not compatible with Halo
Miniature Power-Trac.
CONNECTORS (For use with Lazer Track Only)
LAZER
™
BY HALO
®
LZR200 Live End Feed with Junction
Box Cover
For starting a track run at beginning of
track and when connector is mounted to
a junction box.
Finishes: White (P), Black (MB)
LZR201 Live End Feed
For starting a track run at beginning of track.
Finishes: White (P), Black (MB)
LZR203 Adjustable “L” and Straight
Connector Feed
To connect two track sections at right angles
or straight end-to-end. Includes straight and
right angle covers.
Finishes: White (P), Black (MB)
LZR205 Conduit Continuation Feed
Includes one left feed and one right feed
to continue a run around obstructions.
Requires 1/2” trade size fitting (not included).
Finishes: White (P), Black (MB)
LZR208 Cord and Plug Feed
10’ three-wire cord with grounded plug.
Maximum capacity 5 AMPS.
Finishes: White (P), Black (MB)
LZR212 Mini Connector
For joining two track sections end-to-end.
LZR212 is not an electrical feed.
Finishes: White (P), Black (MB)
LZR214 X Connector
For joining four track sections in an X pattern.
Can be used as electrical feed point.
Finishes: White (P), Black (MB)
DE112 Dead End
Replacement Dead end for Lazer Track ( 6
included).
Finishes: White (P), Black (MB)
LZR202 Floating Canopy and
Connector Feed
Track can be connected to existing outlet
box located anywhere along the track.
Comes with canopy cover, connector,
dead end and mounting hardware.
Finishes: White (P), Black (MB)
LZR204 Conduit Adapter Feed
Designed to accept 1/2” trade size conduit
fitting (not supplied). Use when feeding
to track through surface conduit system.
Finishes: White (P), Black (MB)
LZR206 T-Bar Canopy
For installing track on T-Bar ceilings.
LZR201 or LZR203 also required.
Finish: White (P)
LZR211 Flexible Connector Feed
To connect two track sections at any angle
up to 90° or for connecting wall and ceiling
mounted track. Can be used as electrical
feed point.
Finishes: White (P), Black (MB)
LZR213R Right Handed T Connector
LZR213L Left Handed T Connector
To connect three track sections. Can be used as
electrical feed point.
Finishes: White (P), Black (MB)
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Cooper Lighting L1738 User manual
-
-
-
-
-
-
-
Cooper Lighting L946 User manual
-
Cooper Lighting LF2LV User manual
-
Halo Lighting System L908 User manual
Other documents
-
Lightolier Tangent Track Install Instructions
-
-
-
Halo LZR200P Installation guide
-
-
-
-
-
ETC DataTrack Planning And Installation Manual
-
Lithonia Lighting LTHSPLT MR16GU10 LED 27K 90CRI BN M4 Specification