PCASRSD18BT
Portable Wireless BT Cassette Player
Lid Switcher, AUX Port w/ LED Indicator
www.PyleUSA.com
2
6
5
4
7
1
3
2
PORTABLE WIRELESS BT CASSETTE PLAYER
The following contents guide you how to use the product. Hope this device will
bring you nice digital experience.
With this PCASRSD18BT Portable Wireless BT Cassette Player, you can easily
transmit cassette tape music to your Wireless BT earphone or speaker, you don’t
need to connect an wired earphone or speaker to cassette player anymore.
www.PyleUSA.com
3
FEATURES:
1. Lid switcher: Slide down to open the lid, so can put cassette in.
2. AUX port: Audio output to earphone or speaker.
3. Volume control
4. Wireless BT LED Indicator:
• Quick ash (1 time per second): Search Wireless BT receiver.
• Slow ash (1 time per two seconds): Paired Wireless BT receiver successful.
5. Transparency window: To check if cassette is running.
6. Cassette operate buttons: See following details.
• PLAY: press to play cassette.
• STOP: press to stop play cassette.
• F.F: Fast forward.
• REW: Rewind.
• DIR: Change the direction of cassette playing.
• Auto reverse switch: Slide to auto reverse mode.
7. DC port: 5V DC.
OPERATIONS CASSETTE
Power Supply:
1. You can simply use the USB cable in the package to power supply this device.
2. Or you can also use 2 AA batteries: Open the lid of the deck, and put batteries
in the groove.
Operation:
3. Put a cassette in.
4. Connect a speaker or earphone to “AUX” of the device, or turn on a Wireless BT
earphone or speaker.
5. Press “PLAY” button of the top, you should hear the sound from the cassette
playing.
6. The LED should quick ash when you just connected power, device is searching
the Wireless BT receivers. If you turn on your Wireless BT earphone or speaker,
they will pair successful after few seconds, and LED should slow ash. You should
hear now the sound from your Wireless BT receiver.
www.PyleUSA.com
4
ADDITIONAL INSTRUCTIONS FOR WIRELESS BT:
1. Device starts to search Wireless BT receivers when you connect power, and LED
quick ashes.
2. Usually, device will pair successful after few seconds, and LED slow ashes.
3. If you don’t turn on Wireless BT receiver, or for other reasons, device cannot pair
successful until about three minutes, it will stop search, and LED will turn o.
4. You should power o and power on to start searching Wireless BT receiver again
when the LED is turned o.
www.PyleUSA.com
5
Features:
• User Interface Control buttons: PLAY, STOP, F.F, REW, DIR. Auto-reverse switch,
Volume Control
• LED indicator: Quick Flash for Search Wireless BT Receiver
• Slow Flash for Pair Successful
• Transmit Music to Other Wireless BT Receivers
• Recommend to Use USB Cable for Power Supply for Better Sound Eect
• Includes Auto Reverse Function to turn the Tape Over Quickly with "DIR" Button
• Provides Portability and Convenience
• Portable Design
• Fits in any Bag and can Use it Anywhere
• Small and Compact Cassette Player
• Wireless BT Function: Transmit Music to other BT Receivers, Press "PLAY" Button
and the Device will Auto Search & Pair BT Receiver
What's in the Box:
• Wireless BT Cassette Player
• USB Power Cable
• Earphone
Technical Specs:
• Wireless BT Version: 4.2
• Eective Distance: 10m
• Supporting Agreement: A2DP, AVRCP, AVCTP, AVDTP, HFP, SPP, SMP, ATT, GAP,
GATT, RFCOMM, SDP, I2CAP
• Signal-Noise Ratio: 90db
• Frequency Range: 2.402GHz - 2.480GHz
• Audio Channel: Stereo L/R
• Audio Input: Cassette tape
• Audio Output: 3.5mm Earphone Jack, Bluetooth Transmitter
• Power Supply: 2*AA Battery, or USB Port Power Supply (5V DC Adapter)
• Bit Rate: 128Kbps
• Product Dimensions (L x W x H): 4.45'' x 3.35'' x 1.19'' -inches
-
1
-
2
-
3
-
4
-
5
-
6
Pyle PCASRSD18BT User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pyle PCASRSD17.5 User manual
-
-
Pyle PWMA220BM User manual
-
-
PyleHome PT110 80 Watt AC/DC Microphone PA Mono Amplifier User manual
-
-
Pyle PWMA285BT Owner's manual
-
-
-
Pyle PT210 User manual