2. FINIS
  3. AquaPulse

FINIS AquaPulse Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the FINIS AquaPulse Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FINIS, inc
4647-B Las Positas Rd. Livermore, CA 94551
Toll Free: 888.333.4647
FINISinc.com
Turn ON/OFF the AquaPulse
™
1) Press and hold the INSTANT/POWER button for 3 seconds
2) The AquaPulse
™
will give out a greeting ("Hello" when
turned on, "Goodbye" when turned off), and you can release
the INSTANT/POWER button
3) When the AquaPulse
™
is turned on, it will also announce the
current time period interval (for example: “Time Period 30 Sec”)
Adjust the Volume
1) Quickly press and release either the INCREASE (+) or
DECREASE (–) button, and the device will give a “Hello” greeting
2) The sound level of the “Hello” greeting will signify the
current volume output
3) Use the INCREASE (+) or DECREASE (–) buttons to adjust the
AquaPulse
™
until the “Hello” is at the desired volume level
Set the Time Period
Adjust the time period interval that you want the AquaPulse
™
to audibly communicate your heart rate:
1) Press and HOLD the INCREASE (+) or DECREASE (–) button
2) While holding, the AquaPulse
™
will audibly give out the current
interval setting (for example: “30 Seconds”)
3) Continue to hold the INCREASE (+) or DECREASE (–) button
and the AquaPulse
™
will audibly scroll through the other
pre-set intervals
4) Once the desired setting is given by the AquaPulse™,
release the INCREASE (+) or DECREASE (–) button
5) The AquaPulse™ will then give your current heart rate at the
set time interval. The AquaPulse™ can be set at any of the
following intervals:
10 Seconds 1 Minute
20 Seconds 2 Minutes
30 Seconds 5 Minutes
45 Seconds
Instantaneous Heart Rate
At any time, you can have the device repeat your most
recent heart rate value.
1) Press and release the INSTANT/POWER button
2)
Upon release, the AquaPulse
™
will give your
last recorded heart rate
3) If there is not enough information to retrieve an instant
heart rate, the AquaPulse™ may emit a “Searching” voice
command, indicating that more data is needed
AQUAPULSE
™
QUICK START GUIDE
AquaPulse
™
Specifications
System Requirements:
• USBPortforCharging
Includes:
• AquaPulse
™
Heart Rate Monitor
• InstructionBooklet
• SmallUSBExtensionCable
(For hard to reach USB ports)
QUICK START
GUIDE
/