VTech CS6114 User manual

Category
Telephones
Type
User manual

This manual is also suitable for

Users manual
Models:
CS6114/CS6114-2
www.vtechphones.com
Congratulations
on purchasing your new VTech product. Before using this telephone, please
read the Important safety instructions on page 39 of this manual.
This manual has all the feature operations and troubleshooting necessary
to install and operate your new VTech telephone. Please review this manual
thoroughly to ensure proper installation and operation of this innovative and
feature rich VTech product. For support, shopping, and everything new at
VTech, visit our website at www.vtechphones.com.
In Canada, please visit
www.vtechcanada.com.
The ENERGY STAR
®
program (www.energystar.gov) recognizes
and encourages the use of products that save energy and help
protect our environment. We are proud to mark this product with
the ENERGY STAR
®
label indicating it meets the latest energy
GHſEKGPE[IWKFGNKPGU
T
Compatible with
Hearing Aid T-Coil
TIA-1083
6GNGRJQPGUKFGPVKſGFYKVJVJKUNQIQJCXGTGFWEGFPQKUGCPF
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of the
Telecommunications Industry Association. Used under license.
i
Table of contents
ii
Getting started...............1
Parts checklist ................1
Telephone base installation......2
Wall mounting.................3
Battery installation .............4
Battery charging...............5
Handset layout................6
Telephone base layout..........8
Telephone settings ...........9
Ringer volume ................9
Ringer tone...................9
LCD language ...............10
Clear voicemail...............10
Key tone....................11
Set date and time.............11
CID time synchronization .......12
Home area code..............12
Dial mode...................13
Website.....................13
Telephone operation.........14
Make a call..................14
Predial a call.................14
Answer a call ................14
End a call ..................14
Volume.....................14
Share an outside call ..........14
Call waiting..................14
Temporary ringer silencing......15
Temporary tone dialing.........15
Find handset.................15
Chain dialing.................16
Redial list ...................17
Review the redial list ..........17
Dial a redial entry.............17
Delete a redial entry...........17
Directory....................18
Add a directory entry ..........19
Character chart ..............20
Review the directory...........21
Alphabetical search ...........21
Dial a directory entry ..........21
Edit a directory entry ..........22
Delete a directory entry ........22
Speed dial ..................23
Add a speed dial entry.........23
Dial a speed dial number.......24
Delete a speed dial entry.......24
About caller ID ...............25
Call log.....................26
Missed calls indicator .........26
Memory match...............27
Review the call log............27
View dialing options...........28
Dial a call log number..........28
Save a call log entry to
the directory ...............29
Delete from the call log ........29
Call log display screen messages 30
Appendix...................31
Screen display messages ......31
Handset and telephone base
indicators .................32
Handset screen icons .........32
Battery .....................33
Troubleshooting ..............34
Important safety instructions ....39
Precautions for users of implanted
cardiac pacemakers .........40
Operating range..............40
Maintenance.................40
About cordless telephones......41
The RBRC
®
seal..............41
Warranty....................42
FCC, ACTA and IC regulations . . 44
6GEJPKECNURGEKſECVKQPU ........46
Index ......................47
1
Parts checklist
Your telephone contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.
To purchase a replacement battery or power adapter, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial 1 (800) 267-7377.
Getting started
User’s manual
Handset
Telephone base
Telephone base
power adapter
Telephone line cord
BatteryBattery
compartment cover
2
Getting started
Telephone base installation
Install the telephone base as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a &5.ſNVGTDGVYGGPVJG
VGNGRJQPGNKPGEQTFCPFVGNGRJQPGYCNNLCEM6JGſNVGTRTGXGPVUPQKUGCPFECNNGT
ID problems caused by DSL interference. Contact your DSL service provider
HQTOQTGKPHQTOCVKQPCDQWV&5.ſNVGTU
Use only the power adapter supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
1 (800) 267-7377.
6JGRQYGTCFCRVGTKUKPVGPFGFVQDGEQTTGEVN[QTKGPVGFKPCXGTVKECNQTƀQQT
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Getting started
Telephone base
Telephone
line cord
Electrical outlet
(not controlled
by a wall switch)
Telephone
wall jack
&5.ſNVGTPQVKPENWFGF
required if you have DSL
high-speed Internet service
Telephone base
power adapter
3
Getting started
Wall mounting
Your telephone comes ready for tabletop use. If you prefer to mount your
telephone on the wall (optional), it is designed to mount on a standard
telephone wall plate.
You can mount the telephone base on the wall by positioning it so the mounting
UVWFUſVKPVQVJGEQTTGURQPFKPIJQNGUCVVJGDCEMQHVJGVGNGRJQPGDCUG5NKFG
the telephone base down on the mounting studs until it locks into place.
Mounting
studs
Telephone base
4
Getting started
Battery installation
Install the battery as shown below.
If the battery compartment cover is on the handset, press on the indentation
and slide the cover down to remove.
Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and the wires
inside the battery compartment.
#NKIPVJGEQXGTƀCVCICKPUVVJGDCVVGT[EQORCTVOGPVVJGPUNKFGKVVQYCTFU
the center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base. The CHARGE light
remains on whenever the handset is charging in the telephone base.
1.
2.
3.
4.
5.
If the handset will not be used for a long period of time, disconnect and
remove the battery to prevent any possible leakage.
To purchase a replacement battery, visit our website at www.vtechphones.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
1 (800) 267-7377.
1 2 3
4
5
Red
Wire
Black
Wire
CHARGE
light
5
Getting started
Battery charging
Once you have installed the battery, the screen indicates the battery status
(see the table below). If necessary, place the handset in the telephone base to
charge the battery. For best performance, keep the handset in the telephone
base when not in use. The battery is fully charged after 16 hours of continuous
charging. See the table on page 33 for battery operating times.
If the screen is blank, you need to charge the handset without interruption
for at least 10 minutes to give the handset enough charge to use the
telephone for a short time. When the battery is low, the handset beeps and
shows Low batteryCPFCƀCUJKPI
icon. If you are on a call in low battery
mode, the handset beeps every minute.
The following table summarizes the battery charge indicators and actions
to take.
Battery indicators Battery status Action
The screen is blank or
shows Place in charger
and
ƀCUJGU.
Battery has very little or
no charge. The handset
cannot be used.
Charge without interruption (at
least 30 minutes).
The screen shows Low
battery and
ƀCUJGU
Battery has enough
charge to be used for a
short time.
Charge
without interruption
(about 30 minutes).
The screen shows
HANDSET X and --:-
- --/--.
Battery is charged. To keep the battery charged,
place it in the telephone base
or charger when not in use.
If you do not plug in the battery into the handset and place it in the telephone base
or charger, the screen displays No battery.
6
Getting started
CID/VOL-
Press to review the call log when the
telephone is not in use (page 27).
Press and hold to adjust the ringer volume
when the telephone is not in use
(page 9).
During a call, press to decrease the
listening volume. A double beep sounds
at the lowest setting (page 14).
Press to scroll down while in
programming mode or reviewing the
directory, call log
or redial list.
/FLASH
Press to make or answer a call (page 14).
During a call, press to answer an
incoming call when you receive a call
waiting alert (page 14).
REMOVE
When using the dialing keys, press to
delete digits.
Press and hold to delete all records in
the call log when the phone is not in use
(page 29).
When reviewing the directory, call log
or redial list,
press to delete the desired
record (page 22, 29 or 17).
CHARGE light
On when the handset is charging in the
telephone base (page 4).
TONE
Press to switch to tone dialing temporarily
when using the pulse service (page 14).
Handset layout
Dialing keys
Press to enter numbers to make, predial
or answer a call (page 14).
While programming in the directory or call
log, press to enter numbers or characters
(page 19 or 29).
While programming the home area code,
press to enter numbers (page 12).
7
Getting started
Handset layout
/VOL
+
Press to review the directory when the
telephone is not in use (page 20).
Press and hold to adjust the ringer
volume when the telephone is not in use
(page 9).
During a call, press to increase the
listening volume. A double beep sounds
at the highest setting (page 14).
Press to scroll up while in programming
mode or reviewing the directory, call log
or redial list.
MENU/SELECT
Press to show the menu.
While in a menu, press to choose an
item, or save an entry or setting.
OFF/CLEAR
During a call, press to hang up.
While the handset is ringing, press to
silence the ringer temporarily (page 14).
While the telephone is not in use,
press and hold to erase the missed calls
indicator (page 26).
During programming, press to exit
without making changes.
While predialing, press to delete digits
(page 14).
REDIAL/PAUSE
Press repeatedly to review the redial list
(page 17).
While dialing or entering numbers into
the directory, press to insert a dialing
pause (pages 14 and 19).
#
Press repeatedly to show other dialing
options when reviewing a call log entry
(page 28)
.
Press to use the CLR VOICEMAIL
feature while in the main menu (page
10).
8
Getting started
Telephone base layout
FIND HANDSET
Press to page the handset
(page 15).
IN USE light
On when the handset is in use.
9
Ringer volume
You can adjust the ringer volume or turn the ringer off.
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Ringers, then
pressress
MENU/SELECT twice.
Press
CID/VOL
-
or /VOL
+
to adjust the volume. A sample of eachA sample of each
ringer volume plays as you scroll through the choices. The lowest setting is
Ringer OFF.
Press
MENU/SELECTVQUCXG[QWTUGNGEVKQP[QWYKNNJGCTCEQPſTOCVKQP
tone.
Press OFF/
CLEAR to return to idle mode.
-
OR-
When the handset is not in use, press and hold
CID/VOL
-
or /VOL
+
until
the screen displays
Ringer volume, then press MENU/SELECTƀCUJGU
Press
CID/VOL- or /VOL+ to adjust ringer volume. You hear a sample
of the selected volume level as you scroll through the choices.
Press
MENU/SELECTVQUCXG[QWTUGNGEVKQP[QWYKNNJGCTCEQPſTOCVKQP
tone.
Ringer tone
You can change the handset ringer tone.
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Ringers, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays Ringer tone, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
to select Tone: 1, 2, 3, or 4. The current
UGVVKPIƀCUJGU#UCORNGQHGCEJTKPIGTVQPGRNC[UCU[QWUETQNNVJTQWIJVJG
choices.
Press
MENU/SELECTVQUCXG[QWTUGNGEVKQP[QWYKNNJGCTCEQPſTOCVKQP
tone.
Press OFF/
CLEAR to return to idle mode.
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
4.
5.
6.
Telephone settings
If the ringer volume is set to OFF, Ringer off is displayed on the idle screen.
The setting also determines the ringer volume of the handset paging tone.
However, when the ringer volume is set to OFF, the handset still rings when
you press FIND HANDSET.
If you turn off the ringer volume, you will not hear ringer tone samples.
10
Telephone settings
LCD language
The LCD language is preset to English. You can select English, French or
Spanish to be used in all screen displays.
To select a language:
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Settings,then
press
MENU/SELECT twice.
Press
CID/VOL
-
or /VOL
+
to select English, Français or Español, then
press
MENU/SELECTVQUCXG[QWTUGVVKPI;QWYKNNJGCTCEQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
Clear voicemail
If you subscribe to voicemail service offered by your telephone service
provider, New voicemail and
are displayed on the handset when you have
new voicemail messages. Contact your telephone service provider for more
information and assistance about using your voicemail service.
After you have listened to all new voicemail messages, the indicators on the
handset turn off automatically.
Use t
he clear voicemail feature when the telephone indicates that there is
new voicemail but there are none (for example, when you have accessed your
voicemail while away from home). The clear voicemail feature only turns off the
indicators; it does not delete your voicemail messages. As long as you have
new voicemail messages, your telephone service provider continues to send
the signal that turns on the indicators.
To manually turn off these indicators:
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Clr voicemail,then
press
MENU/SELECT. The screen displays Clear VM icon?
Press
MENU/SELECTVQEQPſTO[QWTUGNGEVKQP[QWYKNNJGCTC
EQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
1.
2.
3.
4.
1.
2.
3.
4.
Your telephone service provider may only alert you of new messages with a
broken (stutter) dial tone. This by itself will not activate the New voicemail
indication on your cordless handset. The provider must also send a digital
signal for Visual Message Waiting Indication to activate the new voicemail alert
on the handset display. This may also be called FSK Voice Message Waiting
Indication. Contact your telephone service provider for details.
11
Telephone settings
Key tone
You can turn the key tone on or off.
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Settings,then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays Key tone, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
to choose On or Off, then press
MENU/SELECTVQEQPſTO[QWTUGNGEVKQP;QWYKNNJGCTCEQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
Set date and time
The answering system announces the date and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be correct so
that the day of the week can be calculated from the caller ID information.
You can also turn off the date and time settings of the caller ID service and use
your own settings for each incoming call (see CID time synchronization on
page 12).
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Settings, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays Set date/time,
then press
MENU/SELECT twice.
9JGPVJGOQPVJKUƀCUJKPIRTGUU
CID/VOL
-
or /VOL
+
until the screen
displays the correct month and then press
MENU/SELECT.
9JGPVJGFCVGKUƀCUJKPIRTGUU
CID/VOL
-
or /VOL
+
until the screen
displays the correct date and then press
MENU/SELECT.
9JGPVJG[GCTKUƀCUJKPIRTGUU
CID/VOL
-
or /VOL
+
until the screen
displays the correct date and then press
MENU/SELECT.
9JGPVJGJQWTKUƀCUJKPIRTGUU
CID/VOL
-
or /VOL
+
until the screen
displays the correct hour and then press
MENU/SELECT.
9JGPVJGOKPWVGKUƀCUJKPIRTGUU
CID/VOL
-
or /VOL
+
until the screen
displays the correct minute and then press
MENU/SELECT.
When AM or PM KUƀCUJKPIRTGUU
CID/VOL
-
or /VOL
+
to select
AM or PM. Press
MENU/SELECT to save your settings, you will hear a
EQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
12
Telephone settings
CID time synchronization
This feature allows the time and date to be set by incoming caller ID
information. The default setting is On.
Press MENU/SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Settings, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays Set date/time, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays CID time sync,
then press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
to choose On or Off, then press
MENU/SELECTVQEQPſTO[QWTUGNGEVKQP;QWYKNNJGCTCEQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
Home area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local
area, the telephone number is automatically stored without the area code in
the call log.
To change the setting:
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Settings, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays Home area code,
then press
MENU/SELECT. 6JGUVQTGFCTGCEQFGKUFKURNC[GFYKVJVJGſTUV
FKIKVƀCUJKPI
Use the dialing keys (0-9) to enter the desired home area code or press
REMOVE to delete.
Press
MENU/SELECTVQEQPſTO[QWYKNNJGCTCEQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, or, if you move to a location that requires it,
delete the home area code you have already programmed following the steps
above. After you have deleted the home area code, _ _ _ appears.
13
Telephone settings
Dial mode
If you have touch-tone service, the telephone is ready to use as soon as the
battery is charged. If you have pulse (rotary) service, you need to change the
dial mode setting to pulse.
To change the setting:
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Settings, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays Dial mode, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
to choose Tone or Pulse, then press
MENU/SELECTVQEQPſTO[QWTUGNGEVKQP;QWYKNNJGCTCEQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
Website
Use this feature to view the VTech website address.
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Website, then
press
MENU/SELECT.
Press OFF/
CLEAR to return to idle mode.
1.
2.
3.
4.
5.
1.
2.
3.
14
Make a call
Press /FLASH and then use the dialing keys (0-9) to dial the
telephone number.
Predial a call
Enter the telephone number using the dialing keys (0-9), then press
/FLASH to dial.
Answer a call
Press /FLASH or any of the dialing keys (0-9, TONE or #).
End a call
Press OFF/CLEAR or put the handset to the telephone base or charger.
Volume
During a call, press CID/VOL
-
or /VOL
+
to adjust the listening volume.
Share an outside call
You can use up to two system handsets at a time on an outside call.
When a handset is already on a call and you would like to join the call, press
/FLASH on another handset to join the call.
To end the call, press OFF/
CLEAR or place the handset in the telephone base
or charger. The call will not end until all handsets hang up.
Call waiting
When you subscribe to call waiting service from your telephone service
provider, you hear an alert tone if there is an incoming call while you are on
another call.
Press
/FLASH to put the current call on hold and take the new call.
Press
/FLASH at any time to switch back and forth between calls.
The screen shows the elapsed time as you talk (in hours, minutes and
seconds).
When predialing (preview numbers before dialing), press REMOVE or
OFF/CLEAR to backspace and delete; press and hold REDIAL/PAUSE to insert
a dialing pause (a P appears).
If the handset is moved out of range while on a call, it will beep
three times
GXGT[ſXGUGEQPFU.
Telephone operation
This feature is only applicable to model CS6114-2.
15
Telephone operation
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the
handset or telephone base without disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
Press OFF/
CLEAR and Ringer muted displays.
To silence the telephone base ringer:
Press
/VOLUME to turn off the base ringer.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call, press
TONE .
Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals.
The telephone automatically returns to pulse dialing mode after you end
the call.
Find handset
7UGVJKUHGCVWTGVQſPFCNNU[UVGOJCPFUGVU
To start paging:
Press FIND HANDSET on the telephone base
when the telephone is not in use.
All idle handsets ring and the screens
show
**
Paging
**
.
To end paging:
Press FIND HANDSET again
on the telephone base.
-OR-
Press OFF/
CLEAR on the handset or place the
handset back in the telephone base to stop the paging tone.
1.
2.
3.
1.
2.
Ringer muted
10:15
PM
12/25
16
Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, call log
or redial list.
To access a number in the directory while on a call:
Press MENU/
SELECT twice to select Directory.
Press MENU/SELECT and then press CID/VOL
-
or /VOL
+
to scroll to the
desired entry.
Press
MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT and then press CID/VOL
-
or /VOL
+
to select
Call log.
Press
MENU/SELECT and then press CID/VOL
-
or /VOL
+
to scroll to the
desired entry.
Press
MENU/SELECT to dial the displayed number.
To access a number in the redial list while on a call:
Press REDIAL/PAUSE and then press CID/VOL
-
or /VOL
+
or REDIAL/
PAUSE to browse to the desired entry.
Press MENU/SELECT to dial the displayed number.
1.
2.
3.
1.
2.
3.
1.
2.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 18.
You cannot copy a call log entry into the directory while on a call. For more
details about call log, see page 26.
You cannot erase a redial entry while on a call. For more details about the redial
memory, see page 17.
Press OFF/
CLEAR to exit redial, directory or call log when you are on a call.
9JGPVJGTGKUOQTGVJCPQPGJCPFUGVQPCECNNQPN[VJGſTUVJCPFUGVVJCV
answered the call can access the directory, call log or redial list.
17
Telephone operation
Redial list
The telephone stores the 5 most recently dialed numbers.
When there are already 5 entries, the oldest entry is deleted to make room
for the new entry.
Entries are shown in reverse chronological order.
Review the redial list
Press REDIAL/PAUSE when the handset is not in use.
Press
CID/VOL-, /VOL+ or REDIAL/PAUSE repeatedly to browse the
redial list.
Dial a redial entry
Press /FLASH when the handset is not in use.
Press REDIAL/
PAUSE to dial the last dialed telephone number.
-OR-
Press REDIAL/
PAUSE when the handset is not in use.
Press
CID/VOL-, /VOL+ or REDIAL/PAUSE until the desired entry is
displayed.
Press
/FLASH to dial.
Delete a redial entry
Press REDIAL/PAUSE when the handset is not in use.
Press
CID/VOL-, /VOL+ or REDIAL/PAUSE repeatedly to browse to the
desired entry.
Press REMOVE to delete the displayed number.
1.
2.
1.
2.
1.
2.
3.
1.
2.
3.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

VTech CS6114 User manual

Category
Telephones
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI