Figure 7
Connect the Drawer Sides
(L) ,Drawer backs (M), Drawer
bottoms (P) and the Left and
Right Front Drawer Panel(O,N)
with 16pcs Long Wood Screws (3)
as figure shown, then fix the 2pcs
Knobs (7) to the Left and Right
Front Drawer Panel (O,N) with 2
pcs Short Bolt (8) as figure
shown.
Figure 8
Connect the Bottom Shelf Frame
(R), the Brace (Q), the Left and
Right Bottom Side Frame (C,D)
with 6pcs Big Blots(1) and 2pcs
Wood Dowels (2) ,tighten by
screwdriver(not included in
hardware list) as figure shown.
Figure 9
Connect the unit assembled at
STEP6 and STEP 8 with 4pcs Big
Blots (1) by using screw driver
(not included in hardware list) as
figure shown, then insert 2pcs
Wood Plugs (9) as shown.