Black & Decker GEH183 User manual

Brand: Black & Decker

Model: GEH183

Category: Power tools

Type: User manual

Black & Decker GEH183 is a multi-purpose tool designed for trimming grass, hedges, shrubs, and brambles. It features a shear blade for trimming grass and weeds, and a hedge trimmer blade for trimming hedges and shrubs. The tool is easy to use, with a lock-off button to prevent accidental starts and a variable speed switch for precise control. It also comes with a blade cover for safe storage and transportation.

GEH183

www.blackanddecker.com

Bahasa indonesia

English (original instructions)

ENGLISH

Your Black & Decker multi-purpose tool has been

designed for a wide range of DIY applications.

Using the shear/trimmer head (GEH183), this tool

is intended for trimming grass, hedges, shrubs and

brambles.

This tool is intended for consumer use only.

Read all safety warnings

and all instructions. Failure to follow

the warnings and instructions listed

and/or serious injury.

Read all safety warnings

and all instructions provide with your

power tool (EVO143, EVO181, EVO183,

EAC800, EAD800)

before using this

follow the warnings

and instructions

or serious injury.

The term “power tool” in the warnings

refers to your mains operated (corded) power tool

or battery operated (cordless) power tool.

Additional safety warnings

for hedge trimmers



A moment of inat-

tention while operating the hedge trimmer may

result in serious personal injury.

min

-1

2,300 2,800

cm 10 10

mm 23 23

cm 15 15

mm 8 8

<1 <1

kg 1.57 1.68

accessory. Failure to

GEH183

Technical Data

SHEAR/ TRIMMER HEAD

EVO143

(14.4V)

EVO181/183

(Max)

2,800

1.68

2,800

1.68

EAC800-KR EAD800-TW

Speciﬁcations:



Proper handling

of the hedge trimmer will reduce possible

personal injury from the cutter blades.



Cutter blades contact-

ing a “live” wire may make exposed metal

parts of the power tool “live” and could give the

operator an electric shock.

ENGLISH

 During

operation the cable may be hidden in shrubs

and can be accidentally cut by the blade.

 The intended use is described in this instruc-

tion manual. The use of any accessory or

attachment or performance of any operation

with this tool other than those recommended

in this instruction manual may present a risk of

personal injury and/or damage to property.

 Always check the hedge/work area for foreign

objects before starting.

 If you have not used a hedge trimmer before,

preferably seek practical instruction by an

experienced user in addition to studying this

manual.

 Never touch the blades while the tool is run-

ning.

 Never attempt to force the blades to come to a

standstill.

 Do not put the tool down until the blades have

come to a complete standstill.

 Regularly check the blades for damage and

wear. Do not use the tool when the blades are

damaged.

 Take care to avoid hard objects (e.g. metal

wire, railings) when trimming. Should you

accidentally hit any such object, immediately

switch the tool off and check for any damage.

 Should the tool start to vibrate abnormally,

immediately switch it off and check for any

damage.

 If the tool stalls, immediately switch it off.

 After use, place the blade sheath supplied over

the blades. Store the tool, making sure that the

blade is not exposed.



when using the tool. Never attempt to use an

incomplete tool or a tool with unauthorised

 Never allow children to use the tool.

 Be aware of falling debris when cutting the

higher slides of a hedge.

Additional safety warnings

for shears

 Never allow people unfamiliar with these in-

structions or children to use the machine. Local

regulations can restrict the age of the operator.

 Keep in mind that the operator or user is

responsible for accidents or hazards occurring

to other people or their property.

 Never operate the machine while people, espe-

cially children, or pets are nearby.

 Use the machine only in daylight or good

ENGLISH

 Take care against injury to feet and hands from

the cutting means. Only switch on the motor

only when the hands and feet are away from

the cutting means.

 Always ensure that the ventilation openings are

kept clear of debris.

 Use only the manufacturer’s recommended

replacement parts and accessories.

 Inspect and maintain the machine regularly.

Have the machine repaired only by an author-

ised repairer.

Contact with, or inhalation

of dusts arising from cutting applica-

tions may endanger the health of the

operator and possible bystanders.

designed for protection against dust

and fumes and ensure that persons

within or entering the work area are

also protected.

The following pictograms are shown on the tool:

To reduce the risk of

injury, the user must read the

instruction manual.

Do not expose the tool to rain or high

humidity.

Beware of sharp blades. Blades

continue to move after the motor is

switched off.

bystanders away.

Directive 2000/14/EC guaranteed

sound power.

ENGLISH

Tool shown is EVO183. Other tools are available

for use with this tool head.

This tool includes some or all of the following

features.

10. Garden Shear/Hedge trimmer head

11. Grass shear blade

12. Hedge trimm blade

13. Blade release button

14. Blade cover

15. Lock off button

16. Grass shear blade cover

17. Hedge trimm blade cover

Before attempting any of the following

operations, remove the battery from the tool and

make sure that the saw blade has stopped. Used

saw blades may be hot.

The shear blade (11) has been designed for trim-

ming grass and weeds. The trim blade (12) has

been designed for trimming hedges and shrubs.

 Hold the tool away from the body

 Push and hold the blade release button (13) in

 Slide the blade cover (14) backward and lift off

 Lower the blade onto the pins (B3).

The retaining magnet (18) will keep the

blade secured to garden shear/hedge trimmer

head.

 Replace the blade cover (14) and slide it

Alignment of the blade with the drive pin

and alignment of the back of the blade and the

blade cover.

Ensure the forward reverse slider (2) is not

in the locked position.

 To switch the tool on, pull the lock off button

(15) then press the variable speed switch (1).

The tool should always be run at full speed.

 Release the lock off button.

 To switch the tool off, release the variable

speed switch.

ENGLISH

 In order to achieve optimum cutting results,

only cut dry grass.



other hand well away from the blade. Maintain

a stable working position so that you do not

slip. Do not overreach.

 When cutting long grass, work in stages from

the top. Take small cuts.

 Keep the tool away from hard objects and

delicate plants.

 If the tool starts running slowly, reduce the

load.

 To make a closer cut, slightly tilt the tool.

 Slightly tilt the tool (up to 15° relative to the

line of cut) so that the blade tips point slightly

blades to cut more effectively.

 Start by trimming the top of the hedge. Hold

the tool at the desired angle and move it stead-

sided blade allows you to cut in either direction.

 In order to obtain a very straight cut, stretch a

piece of string along the length of the hedge

at the desired height. Use the string as a

guideline, cutting just above it.



the growth. Younger stems move outwards

when the blade cuts downwards, causing shal-

low patches in the hedge.

 Take care to avoid any foreign objects.

Especially avoid hard objects such as metal

wire and railings, as these could damage the

blades.

 Regularly oil the blades.

Disposal

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black &

Decker product needs replacement, or if it is of

no further use to you, do not dispose of it with

household waste. Make this product available

for separate

collection

Separate collection of used products and

packaging allows materials to be recycled and

used again. Re-use of recycled materials

helps prevent environmental pollution and

reduces the demand for raw materials.

Local regulations may provide for separate

collection of elec-trical products from the

household, at municipal waste sites or by the

retailer when you purchase a new product.

Service information

Black & Decker offers a full network of

company-owned and authorized service

locations throughout Asia. All Black & Decker

Service Centers are staffed with trained

personnel to provide customers with efficient

and reliable power tool service. Whether you

need technical advice, repair, or genuine

factory replacement parts, contact the Black &

Decker location nearest to you.

Note

Black & Decker's policy is one of continuous

improvement to our products and, as such, we

reserve the right to change product

specifications without prior notice.

Standard equipment and accessories may

vary by country.

Product specifications may differ by country.

Complete product range may not be

available in all countries. Contact your local

Black & Decker dealers for range availability.

ENGLISH

Disposal

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black &

Decker product needs replacement, or if it is of

no further use to you, do not dispose of it with

household waste. Make this product available

for separate

collection

Separate collection of used products and

packaging allows materials to be recycled and

used again. Re-use of recycled materials

helps prevent environmental pollution and

reduces the demand for raw materials.

Local regulations may provide for separate

collection of elec-trical products from the

household, at municipal waste sites or by the

retailer when you purchase a new product.

Service information

Black & Decker offers a full network of

company-owned and authorized service

locations throughout Asia. All Black & Decker

Service Centers are staffed with trained

personnel to provide customers with efficient

and reliable power tool service. Whether you

need technical advice, repair, or genuine

factory replacement parts, contact the Black &

Decker location nearest to you.

Note

Black & Decker's policy is one of continuous

improvement to our products and, as such, we

reserve the right to change product

specifications without prior notice.

Standard equipment and accessories may

vary by country.

Product specifications may differ by country.

Complete product range may not be

available in all countries. Contact your local

Black & Decker dealers for range availability.

한글판

전정기(시어/트리머) 헤드

GEH183-KR

기술 데이터

사양:

EVO143 EVO181/183 EAC800-KR EAD800-TW

(14.4V) (

최대

)

무부하 속도

분

-1

2,300 2,800 2,800 2,800

톱날 길이

cm 10 10 10 10

(시어)

톱날 틈

mm 23 23 23 23

(시어)

톱날 길이

cm 15 15 15 15

(트리머)

톱날 틈

mm 8 8 8 8

(트리머)

톱날 제동 시간

mm <1 <1 <1 <1

무게

kg 1.57 1.68 1.68 1.68

용도

Black & Decker 다목적 공구는 다양한 DIY

작업용으로 설계되었습니다. 전정기

(시어/트리머) 헤드(GEH183)를 사용하는,

이 공구는 잔디, 울타리, 관목 및

검은 딸기나무를 손질하는 용도로

고안되었습니다.

본 공구는 소비자용입니다.

한글판

繁體中文

草皮修剪機/樹籬修剪機頭

GEH183

技術資料

規格:

EVO143 EVO181/183 EAC800-KR EAD800-TW

(14.4V) (

最大

)

空載速度

mnt

2,300 2,800 2,800 2,800

刀片長度

cm 10 10 10 10

(草皮修剪機)

刀片間隙

mm 23 23 23 23

(草皮修剪機)

刀片長度

cm 15 15 15 15

(樹籬修剪機)

刀片間隙

mm 8 8 8 8

(樹籬修剪機)

刀片制動時間

mm <1 <1 <1 <1

重量

kg 1.57 1.68 1.68 1.68

設計用途

您的 Black & Decker 多用途工具設計用於各

種 DIY 應用。本草皮修剪機/樹籬修剪機頭

(GEH183) 工具可用於對草皮、樹籬、灌木

與荊棘進行修剪。

本工具僅供一般消費者家庭使用。

繁體中文

Page is loading ...

Black & Decker GEH183 User manual

Brand: Black & Decker

Model: GEH183

Category: Power tools

Type: User manual

Download PDF

report

Black & Decker GEH183 User manual

Black & Decker GEH183 User manual

Related papers

Other documents