PRODUCT INFORMATION
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
18.04.2018
Page 3/4
Most all-in-one systems stick to one pattern, they keep
the speakers in the housing of the turntable. While this
might be a nice solution for saving space, it introduces a
very critical problem for audio reproduction. When a
speaker is sitting basically in the turntable, the moving
parts of the speakers pass on vibrations to the tonearm.
This is a cause for a distorted sound and on top can harm
both the needle and the vinyl. No true audio enthusiast
would want that.
Additionally to a harmful experience for the needle and
the record, the listener will not be able to enjoy a real
two-channel sound. Even though in theory the built-in
speakers of such all-in-one systems might be set up as a
stereo pair, the reality proves that only a mono sound can
be heard in the end. This is because the drivers of the
speakers are too close together to form an honest stereo
image.
The Juke Box S2 Stereo Set solves all these problems by
simply putting the speakers outside of the turntable. This
way the listener will be able to place the speakers in a
distance that allows him to enjoy a real stereo sound. The
supplied bookshelf speakers, Speaker Box 5 S2, convince
with a realistic sound, punchy and well driven bass and
emotional mids with clear highs. With the supplied
speaker cables, Connect it LS, the Speaker Box 5 S2 can
be connected and allow a very easy setup with a
plug&pay character.
The Juke Box S2 Stereo Set proves that all-in-one
systems can be high end and don’t have to harm your
records.
Juke Box S2 Stereo Set: High end and all-in-one