Pro-Ject Audio Systems Primary Product information

Category
Audio turntables
Type
Product information
Primary
Audiophile „Plug & Play“ turntable
 Instant playback with super-easy setup
 Pre-adjusted tracking force & anti-skating force
 Ortofon OM5e cartridge, pre-mounted
 8,6” aluminium tonearm with sapphire bearings
 Belt drive with silicone belt
 Low vibration synchronous motor & DC power supply
 Pre-mounted gold-plated RCA interconnect cable
 Special turntable feet for effective decoupling
 Acrylic lid included
 Colour options: Black matt, White matt
Update: MH Datum 14.07.2016
Product information
07.2016
PRO-JECT AUDIO SYSTEMS
a division of AUDIO TUNING GmbH
1050 Wien, Margaretenstraße 98,
Speed 33, 45 (manual speed change)
Principle belt drive
Speed variance 33: 0,80% 45: 0,70%
Wow & flutter 33: 0,29% 45: 0,27%
Platter 300mm MDF with felt mat (0,8kg)
Main bearing stainless steel
Tonearm 8,6” aluminium
Effective arm length 218,5 mm
Overhang 22,0mm
Effective tonearm mass 8,0gr
Counterweight for mass 3 - 5,5g (included)
Tracking force range 0 - 25mN (OM5 18mN pre-adjusted)
Included accessory power supply, dust cover
Power consumption 4,5 watts
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4,0 kg net
Primary black/white
SRP
on request
Audiophile “Plug & Play” turntable with easiest possible set-up and class-leading sound!
If you thought that a turntable set-up is complicated like rocket-science, Primary proves the contrary. This good sounding belt-
drive deck offers the fastest possible installation process because it comes pre-adjusted out of the box.
No further set-up is needed. Tracking force and anti-skating are carefully set. An acrylic dust cover is included. The turntable
is available in matt black or matt white colour.
  • Page 1 1

Pro-Ject Audio Systems Primary Product information

Category
Audio turntables
Type
Product information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI