As you are aware Murex Welding Products recently introduced the following
welding equipment into their product range:
MIG
Tradesmig 180-1, 210-1, 260-1, Single Phase composite units
Tradesmig 280-3, Three Phase composite unit
Transmig 300C, 350C, Three Phase composite units
Transweld Challenger 400 Power Source
Transmatic 4C Feed Unit for use with Transweld Challenger 400
TIG
Tradestig DC150-1, DC200-1, Single Phase Units
Transtig DC150-1, DC200-1, Single Phase Units
* Transtig AC/DC253iS, Three Phase Unit
MMA
Tradesarc DC150-1, DC180-1, Single Phase Units
Please Note
The Service Manuals for all the above equipment, and indeed, now all Murex
equipment can be accessed via the Murex web page.
They are however password protected.
For your information only:
The Username is - welding
The Password is - engineer
* For service information on this unit refer to the service information on the
Transtig AC/DC 201iS, 203iS, 353iS.
The instruction manuals/parts lists are also on the Murex web page although
these are not password protected.
Reg Hayward