2. Ampetronic
  3. WM-C-LP

Ampetronic WM-C-LP Installation guide

  • Hello! I'm your chat assistant. I've reviewed the WM-C UP49801 Drilling Template document. It includes instructions and dimensions for mounting, specifying a 288mm distance between drilling points and the requirement of a TX10 screwdriver. I'm here to help, just ask any question about this template and the device it supports.
  • What size screwdriver is required for mounting?
    Should I use only the screws provided?
    What is distance for drilling?
F
F F
F
Front of unit
Drill for horizontal mount
Drill for
vertical
mount
Corner of unit
UP4980121190 Issue 3Date: 10/11/21App'd PNHChck'd DJW
288 mm
288 mm
Note to customer: Double check dimensions before drilling
Remove ALL rubber feet if fitted
Front of unit
Both brackets must be
mounted in the same
orientation (as shown)
A TX10 sized screwdriver
is required.
Please ONLY fit with screws
provided
/