2. sks
  3. LOCKCAGE

sks LOCKCAGE User manual

  • Hello! I've reviewed the user manual for the SKS 11436 bottle cage with integrated cable lock. This document explains how to set and change the combination of the lock, secure your accessories and release the cable. I am ready to answer any questions you may have about its operation.
  • What is the default combination number?
    How do I change the combination?
    How to release the cable from the lock?
    Can I damage the cable?
MADE IN GERMANY SKS-GERMANY.COM
GERMANY
LOCKCAGE ¬ 11436
EN. LOCKCAGE
Bottle cage with cable lock.
ROAD
ALLROAD MOUNTAIN
CHANGE LOCK COMBINATION USE LOCKCAGE
LOCKCAGE default combination number is 0-0-0. Before attempting
to change the combination, make sure the lock's dial is set to 0-0-0.
➊ Press the cable end pin into the LOCKCAGE until a »Click« is felt.
➋ Change the dial to the desired combination number.
➌ Pull back the tip back to its original position until a »Click« is felt.
➊ Turn the dial until the set combination number is shown (Default combination number is »0-0-0«).
!Pulling the cable without pressing the release button may damage
the cable coating!
➋ Press the cable's release button continuously and pull the cable from its tip.
➌ Lock the LOCKCAGE and desired accessories to the bike
by pushing in the tip of the cable to the lock shack.
➍ Chage the dial to a random number to secure the RIDEAIRTM.
RELEASE THE LOCK
➊ Turn the dial until the set combination number is shown (Default combination is »0-0-0«).
➌ Press the cable release button continuously to retract the cable back to its original place.
➋ Press the tip release button to release the cable from the shack.
It is recommanded to hold the cable
while retracting it for a safer use.
/