Symmons 0488-3506-T736-1.75-TRM Installation guide

Symmons
Brand
Symmons
Model
0488-3506-T736-1.75-TRM
Category
Faucets
Type
Installation guide

This manual is also suitable for

Symmons 0488-3506-T736-1.75-TRM is a tub and shower trim that includes a metal lever handle, shower arm with decorative flange, hand shower coupling with flange, in-line vacuum breaker, non-diverter tub spout, ADA 1 mode hand shower and 1 mode showerhead with a 1.75 gpm (6.6 L/min) flow restrictor. It is made of metal and plated in standard polished chrome finish. The tub and shower trim is compliant with ASME A112.18.1/CSA B125.1 and ASSE 1014 standards and comes with a 5-year warranty for industrial/commercial installations.

Symmons 0488-3506-T736-1.75-TRM is a tub and shower trim that includes a metal lever handle, shower arm with decorative flange, hand shower coupling with flange, in-line vacuum breaker, non-diverter tub spout, ADA 1 mode hand shower and 1 mode showerhead with a 1.75 gpm (6.6 L/min) flow restrictor. It is made of metal and plated in standard polished chrome finish. The tub and shower trim is compliant with ASME A112.18.1/CSA B125.1 and ASSE 1014 standards and comes with a 5-year warranty for industrial/commercial installations.

TUB/SHOWER/HAND SHOWER TRIM
MODEL: 0488-3506-T736-2.0-TRM
INSTALLATION GUIDE
DIMENSIONS
7"
(178mm)
1/2-14 NPT
5-5/16"
(135mm)
REF.
77"
(1956mm)
REF.
32"
(813mm)
REF.
12"
(305mm)
6-9/16"
(167mm) Ø 2-1/2"
(64mm)
3-1/2"
(89mm)
ROUGH-IN
2-3/8" ± 1/2"
(60mm ± 13mm)
FLOOR
Ø 7-3/4"
(197mm)
PIPING AND
FITTINGS ARE
NOT SUPPLIED
WALL SHOWN FOR
REFERENCE ONLY
(2x) 3"
(76mm)
(2x) 2-15/16"
(75mm)
REF.
10"
(254mm)
Ø 2-1/2"
(64mm)
Ø 5"
(127mm)
Ø 2-1/2"
(64mm)
Ø 3-1/16"
(78mm)
35-3/8"
(899mm)
Ø 6"
(152mm)
5/8"
(16mm)
1/2-14 NPT
FEATURE HIGHLIGHTS
Tub/Shower/Hand Shower Trim shall include metal lever handles, shower arm with decorative flange, hand shower
coupling with flange, in-line vacuum breaker, non-diverter tub spout, ADA 1 mode hand shower and 1 mode
showerhead with 2.0 gpm (7.6 L/min) flow restrictors.
Tub/Shower/Hand Shower Trim shall be metal construction plated in standard polished chrome finish.
WARRANTY
5 Years - for industrial/commercial installations.
Refer to symmons.com/warranty for complete warranty information.
COMPLIANCE
• ASME A112.18.1/CSA B125.1
• ASSE 1014 (in-line vacuum breaker for back flow protection)
MODIFICATIONS
☐-1.75
CG
1.75 gpm (6.6 L/min) flow restrictor
Note: Append appropriate -sux to model number.
Note: Dimensions subject to change
without notice.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-2631 REV A ■ 072418
INSTALLATION/PARTS BREAKDOWN
14
1
2
4
56
10
11
12
7
8
9
13
7
8
9
15
16
17
19
18
3
Item Description Part Number
1
2
Flange
Shower Arm 300S
3Showerhead 2.0
Showerhead 1.75
532SH-2.0
532SH-1.75
4
5
6
Mounting Plate
Mounting Screws
Diverter Escutcheon
T-416A
7 Dome Cover T-19
8
9
Handle
Set Screw T-242A
9 Set Screw S2H-8D
10
11
12
Mounting Plate
Mounting Screws
Shower Escutcheon
T-237NSP-
K002
13 Tub Spout 067
14 Wall Elbow FP-40
15
16
Vacuum Breaker
60" Hose EF-104
17 Slide Bar Assembly T-600B-36
18 Hand Shower 2.0
Hand Shower 1.75
ADACHS-2.0
ADACHS-1.75
19 Slide Mechanism FP-SM6
Tools Required
Adjustable Wrench
Allen Wrench:
Handle (3/16")
Phillips Head
Screwdriver
Plumber Tape
Silicone
Notes:
1) Apply a bead of silicone around the perimeter of all shower trim
installed flush to the finished wall (less mounting plates and
brackets). Leave opening on bottom of escutcheon for weep hole.
2) Apply plumber tape to threaded connections as necessary.
DO NOT use plumber tape on fittings with face seal washers or
o-rings.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
  • Page 1 1
  • Page 2 2

Symmons 0488-3506-T736-1.75-TRM Installation guide

Symmons
Brand
Symmons
Model
0488-3506-T736-1.75-TRM
Category
Faucets
Type
Installation guide
This manual is also suitable for

Symmons 0488-3506-T736-1.75-TRM is a tub and shower trim that includes a metal lever handle, shower arm with decorative flange, hand shower coupling with flange, in-line vacuum breaker, non-diverter tub spout, ADA 1 mode hand shower and 1 mode showerhead with a 1.75 gpm (6.6 L/min) flow restrictor. It is made of metal and plated in standard polished chrome finish. The tub and shower trim is compliant with ASME A112.18.1/CSA B125.1 and ASSE 1014 standards and comes with a 5-year warranty for industrial/commercial installations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents