SHOWER/HAND SHOWER TRIM
MODEL: 0488-3505-T736-2.0-TRM
INSTALLATION GUIDE
DIMENSIONS
REF.
77"
(1956mm)
REF.
42"
(1067mm)
6-9/16"
(167mm) Ø 2-1/2"
(64mm)
3-1/2"
(89mm)
ROUGH-IN
2-3/8" ± 1/2"
(60mm ± 13mm)
FLOOR
Ø 7-3/4"
(197mm)
PIPING AND
FITTINGS ARE
NOT SUPPLIED
WALL SHOWN FOR
REFERENCE ONLY
(2x) 3"
(76mm)
(2x) 2-15/16"
(75mm)
REF.
10"
(254mm)
Ø 2-1/2"
(64mm)
Ø 5"
(127mm)
Ø 3-1/16"
(78mm)
35-3/8"
(899mm)
Ø 6"
(152mm)
5/8"
(16mm)
1/2-14 NPT
Note: Dimensions subject to change without notice.
FEATURE HIGHLIGHTS
Shower/Hand Shower Trim shall include metal lever handles, shower arm with decorative flange, hand shower coupling
with flange, in-line vacuum breaker, ADA 1 mode hand shower and 1 mode showerhead with 2.0 gpm (7.6 L/min) flow
restrictors. Shower/Hand Shower Trim shall be metal construction plated in standard polished chrome finish.
WARRANTY
5 Years - for industrial/commercial installations.
Refer to symmons.com/warranty for complete warranty information.
COMPLIANCE
• ASME A112.18.1/CSA B125.1
• ASSE 1014 (in-line vacuum breaker for back flow protection)
MODIFICATIONS
☐-1.75
CG
1.75 gpm (6.6 L/min) flow restrictor
Note: Append appropriate -sux to model number.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-2632 REV A ■ 072418
INSTALLATION/PARTS BREAKDOWN
13
1
2
4
56
10
11
12
7
8
9
7
8
9
14
15
16
18
17
3
Item Description Part Number
1
2
Flange
Shower Arm 300S
3Showerhead 2.0
Showerhead 1.75
532SH-2.0
532SH-1.75
4
5
6
Mounting Plate
Mounting Screws
Diverter Escutcheon
T-416A
7 Dome Cover T-19
8
9
Handle
Set Screw T-242A
9 Set Screw S2H-8D
10
11
12
Mounting Plate
Mounting Screws
Shower Escutcheon
T-237NSP-
K002
13 Wall Elbow FP-40
14
15
Vacuum Breaker
60" Hose EF-104
16 Slide Bar Assembly T-600B-36
17 Hand Shower 2.0
Hand Shower 1.75
ADACHS-2.0
ADACHS-1.75
18 Slide Mechanism FP-SM6
Tools Required
Adjustable Wrench
Allen Wrench:
Handle (3/16")
Phillips Head
Screwdriver
Plumber Tape
Silicone
Notes:
1) Apply a bead of silicone around the perimeter of all shower trim
installed flush to the finished wall (less mounting plates and
brackets). Leave opening on bottom of escutcheon for weep hole.
2) Apply plumber tape to threaded connections as necessary.
DO NOT use plumber tape on fittings with face seal washers or
o-rings.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
-
1
-
2
Symmons 0488-3505-T736-2.0-TRM Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Symmons 0142-01-L/HD-TRM Installation guide
-
-
-
-
-
Symmons Industries 9605-PLR-1.5-STN Installation guide
-
-
-
-