Atdec TH-2250-VTP User manual

TH-2250-VTP
Atdec
Brand
Atdec
Model
TH-2250-VTP
Type
User manual

This manual is also suitable for

Atdec TH-2250-VTP is a flat-screen wall mount with tilt functionality, suitable for mounting displays with VESA patterns ranging from 50x50mm to 200x200mm. It offers adjustable tilt angles to optimize viewing comfort and reduce glare, making it ideal for various display types and applications, including home entertainment systems, conference rooms, and digital signage solutions.

Atdec TH-2250-VTP is a flat-screen wall mount with tilt functionality, suitable for mounting displays with VESA patterns ranging from 50x50mm to 200x200mm. It offers adjustable tilt angles to optimize viewing comfort and reduce glare, making it ideal for various display types and applications, including home entertainment systems, conference rooms, and digital signage solutions.

Component Checklist
Step 1. Component Checklist
Check you have received all parts against the Component Checklist above.
Hardware
Mounting Fasteners
Step 2. Remove the Wall Bracket Cover
TH-2250-VTP

70
Installation Instructions
Nylon
Anchor (x2)
M4 Washer (x4)
M5 Washer (x4)
Wall Mount
Screw (x2)
Flat Screen Wall Mount | Tilt
M6x8mm / M6x12mm (x4 each)
M4x8mm / M4x12mm (x4 each)
M5x8mm / M5x12mm (x4 each)
M6 Washer (x4)
TOOLS REQUIRED:
UÊ*ÜiÀÊÀ
UÊ*ps Head Screw river
UÊ{Ê
3
/
16
»®ÊÀÊÌ
UÊnÊ
5
/
16
»®Ê>ÃÀÞÊÀÊÌ
Remove the two Locking Screws,
on both left and right sides.
Step 3. Remove the Mounting Plate
Step 4. Fix the Wall Bracket to the Wall
Using the Wall Plate as a drilling template, choose from one of the following Mounting options, Timber Stud OR Masonry Wall.
Drill two holes 50mm
deep with a 4mm
drill bit.
Masonry Wall
Nylon Anchor
(x2)
Wall Mount Screw (x2)
Wall Plate
M6 Washer (x2)
Wall Plate
Wall Mount Screw (x2)
M6 Washer (x2)
Timber Stud
Drill two holes 50mm
deep with a 8mm
Masonry drill bit.
LIFT
TH-2250-VTP
(fully assembled)
IMPORTANT INFORMATION
! IMPORTANT - Install Telehook Wall Mount as per Installation Instructions.
tÊÊÊ/iiÊ7>ÊÕÌÊÃÕ««ÀÌÃÊë>ÞÃÊÜi}}ÊÕ«ÊÌÊÎä}ÊÈÈLî]ÊÜÌÊ6-ÊiÊVv}ÕÀ>ÌÃ\
50x50mm (2”x2”), 75x75mm (3”x3”),100x100mm (4”x4”), 200x100mm (8”x4”), 200x200mm (8”x8”).
! The Manufacturer accepts no responsibility for incorrect installation.
Cover
Locking
Screw (x2)
PULL
PULL
Step 6. Fasten the Mounting Plate to your Display
Mounting Screw (x4)
Choose appropriate Mounting Screws
and Washers from the Hardware
supplied to suit your Display.
Washer (x4)
Top of
Display
Mounting Plate
Step 7. Attach the Display to the Wall
Step 8. Tilt Adjustment
Locking
Screw (x2)
Hook the Mounting Plate
onto the Wall Bracket.
Wall Bracket
Mounting Plate
Re-insert the two
Locking Screws
on boths sides.
Display
bb
( required)
Tighten the Lever to lock the
Display in the desired position.
Step 5. Reinstall Wall Bracket Cover
Push the two pieces of
the Cover together.
PUSH
PUSH
TILT
TILT
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 06.01.10 ©
LOOSEN
Loosen the Lever before adjusting tilt.
TIGHTEN
Lever
LOWER
  • Page 1 1
  • Page 2 2

Atdec TH-2250-VTP User manual

TH-2250-VTP
Atdec
Brand
Atdec
Model
TH-2250-VTP
Type
User manual
This manual is also suitable for

Atdec TH-2250-VTP is a flat-screen wall mount with tilt functionality, suitable for mounting displays with VESA patterns ranging from 50x50mm to 200x200mm. It offers adjustable tilt angles to optimize viewing comfort and reduce glare, making it ideal for various display types and applications, including home entertainment systems, conference rooms, and digital signage solutions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents