2. Savant
  3. HST-DIRECTOR-00

Savant HST-DIRECTOR-00, HST-DIRECTORLITE-00 Deployment Guide

  • Hello! I've reviewed the Savant Power System Quick Start Guide, which outlines the installation and setup process for the Power Director, Power Modules, and Power Storage 20. This guide covers network connections, app configuration, breaker panel setup, and more. I'm ready to assist with any questions you may have about the system.
  • Where is the Power Storage 20 QR Code located?
    Where can I find other Power Source IP addresses?
    How do I manage the Power Director wi-fi configuration?
Savant Power System Quick Start Guide Copyright 2023 Savant Systems, Inc
009-2405-00 | 090123 savant.com | 508.683.2500
Savant Power System Quick Start Guide
Basic Installation
1. INSTALL POWER DIRECTOR, MODULES, & POWER SOURCE .................
See applicable Installation, App Setup & Quick Reference Guides
2. COMPLETE POWER MODULE SETUP ................................................................
Use the PAIR button on Power Modules to configure slots & names.
Power System Configuration
3. CONNECT POWER SYSTEM TO THE LOCAL AREA NETWORK ..............
NOTES: Power Director wi-fi configuration is managed in the Savant
Power & Light app.
4. DOWNLOAD POWER & LIGHT APP & COMPLETE APP SETUP ...............
Create an account & follow prompts to create & label a new home.
5. CREATE & CONFIGURE BREAKER PANEL .......................................................
Tap Breaker Panels & follow Panel Setup Wizard.
6. TEST CIRCUITS.............................................................................................................
7. ADD POWER SOURCE ..............................................................................................
NOTES:
–The Power Storage 20 QR Code is located on the right side of the
inverter.
–Other Power Source IP addresses are found under Settings >
Devices On Network
8. (IF APPLICABLE) CONFIGURE ENERGY MONITORING DEVICES ..........
9. (IF APPLICABLE) CREATE ENERGY SCENES .................................................
Tap Energy Management & create a new Scene or edit Essentials.
10. SYNC CONFIGURATION TO POWER DIRECTOR ...........................................
Ethernet
Bluetooth to
Power Modules
Wi-Fi
Power Status WiFi Status
Reset Pair Local Mode
RS485
PoE
GPIO 5VDC
INPUT OUTPUT
OUTPUT
B
A
B
A
INPUT
CIRCUIT POWER
ON
AUTO
PAIR
A B
20A DUAL RELAY
RS232
DC 12V
BCMS
RS485-1C-LEDSIMSD
RESET
USB4
USB3
GPS
USB2
NETWORK
Power Storage 20
Network Switch
Savant Power & Light
App - Google Play
Savant Power & Light
App - Apple Store
1
3
5
6
7
10
8
9
4
2
/