2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Peerless
  6. DS-ACC765

Peerless DS-ACC765 User manual

  • Hello, I'm your chat assistant, I've reviewed the installation instructions for the Peerless Cable Release Kit DS-ACC765. The document details how to install the included fastener plate, cable, and optional eyebolt for use with video wall mounts. I'm ready to answer any questions you have about the installation process or the components of the kit.
  • What components are included in this kit?
    How do I install the cable?
    When should I use the eyebolt?
1 of 2 ISSUED: 06-09-11 SHEET #: 120-9111-1
PartsList
Description Qty. Part#
Afastenerplate 4 145‐1144
Bcable4 600‐0226
Ceyebolt4 580‐0006
Model: DS-ACC765
Installation and Assembly:
Cable Release Kit
A
B
NOTE: Read entire instruction sheet before you start installation and assembly.
Before you start make sure all parts listed are included with your product.
1
1. Run cable (B) through hole
in pull-out mount assembly and
fastener plate (A) as shown.
2. Run cable (B) through hole
in release mechanism and up
through second row of holes in
fastener plate (A) as shown.
3. For easy accessibility:
Tape or secure loop end of
cable onto top of display or
wall.
REPEAT STEPS WITH
OPPOSITE SIDE OF VIDEO
WALL MOUNT.
21
HOLE
A
A
B
B
C
2 of 2 ISSUED: 06-09-11 SHEET #: 120-9111-1
LOOP
© 2010, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Position DS-ACC765 cables in locations as shown.
Additional Cable Release Kits may be required if more than three displays are mounted horizontally.
2
2
C
Optional Eyebolt
If display is placed in recess and cable cannot be pull straight up, use eyebolt (C) in corner.
Run loop end of cable (B) though eyebolt (C) as shown.
PULL DIRECTION
/