Peerless KL546-AW Installation guide
- Category
- Flat panel floor stands
- Type
- Installation guide
ISSUED: 03-27-12 SHEET #:125-9290-3 05-21-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
1 of 7
Installation and Assembly:
Indoor Digital Signage/Kiosk Enclosure - Landscape
Model: KL540-S, KL546-S, KL540-AB, KL546-AB, KL540-AW, KL546-AW
Maximum Load Capacity:
75 lb (28 kg)
ISSUED: 03-27-12 SHEET #:125-9290-3 05-21-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
2 of 7
ABC
D
EF H
I J K L M
N
G
O
PQ
S
PARTS LIST KL540-S KL546-S KL540-AB KL546-AB KL540-AW KL546-AW
Description Qty. Part
#
Part
#
Part
#
Part
#
Part
#
Part
#
Astand weldment 1 145-F4596 145-F4596 145-S1596 145-S1596 145-S2596 145-S2596
Bbase weldment 1 145-F4553 145-F4553 145-S1553 145-S1553 145-S2553 145-S2553
Cenclosure assembly 1 145-F4600 145-F4599 145-S1600 145-S1599 145-S2600 145-S2599
Dadapter plate 1 145-F4579 145-F4579 145-S1579 145-S1579 145-S2579 145-S2579
Eadapter bracket 2 145-F4597 145-F4597 145-S1597 145-S1597 145-S2597 145-S2597
F1/4-20 knob 4 560-1199 560-1199 560-1199 560-1199 560-1199 560-1199
G#8-32 socket cap screw 8 520-1210 520-1210 520-1210 520-1210 520-1210 520-1210
Hrubber foot 8 590-1288 590-1288 590-1288 590-1288 590-1288 590-1288
I1/4-20 flanged locknut 2 530-2021 530-2021 530-2021 530-2021 530-2021 530-2021
Jnylon shoulder washer 4 590‐2233 590‐2233 590‐2233 590‐2233 590‐2233 590‐2233
KM6 x 12 mm socket pin screw 4 520-1050 520-1050 520-1050 520-1050 520-1050 520-1050
LM8 x 15 mm socket pin screw 4 520-1068 520-1068 520-1068 520-1068 520-1068 520-1068
M4 mm allen wrench 1 560-9646 560-9646 560-9646 560-9646 560-9646 560-9646
Nhinged door 1 145-F4598 145-F4598 145-S1598 145-S1598 145-S2598 145-S2598
O9/64" allen wrench 1 560-9728 560-9728 560-9728 560-9728 560-9728 560-9728
P1/4-20 x 1/2" socket pin screw 4 520-2069 520-2069 520-1054 520-1054 520-2069 520-2069
QM4 nylock nut 2 530-9415 530-9415 530-9415 530-9415 530-9415 530-9415
Rlock key (not shown) 3 565-0052A 565-0052A 565-0052A 565-0052A 565-0052A 565-0052A
SM8 x 20 socket pin scre
w
4 520-112
0
520-112
0
520-112
0
520-112
0
520-112
0
520-112
0
ISSUED: 03-27-12 SHEET #:125-9290-3 05-21-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
3 of 7
Tip base weldment (B) backward onto oor. Secure eight rubber feet (H) using eight #8-32 x 3/8” socket head cap
screws (G) to bottom of base weldment (B) using tool (O) as shown below.
NOTE: Do not over tighten.
1
BOTTOM OF BASE WELDMENT (B)
B
B
HG
Attach stand weldment (A) to base weldment (B) using four 1/4-20 socket pin screws (P).
NOTE: Loosely fasten all 1/4-20 socket pin screws (P), then tighten all screws using 4 mm allen wrench (M)
until stand weldment is secure.
2
NOTE: holes indicate
back of stand
BACK
DETAIL 1
A
B
B
A
P
ISSUED: 03-27-12 SHEET #:125-9290-3 05-21-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
4 of 7
Secure enclosure assembly (C) using two 1/4-20 anged locknuts (I) as shown in detail 3.
3
DETAIL 3
C
D A
I
Position enclosure assembly (C), and adapter plate (D) on top of stand weldment (A).
Make sure that holes in enclosure assembly (C), and adapter plate (D) go over
threaded studs in stand weldment (A)
3
C
D
A
DETAIL 2
THREADED STUDS
THREADED STUDS
ISSUED: 03-27-12 SHEET #:125-9290-3 05-21-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
5 of 7
NOTE: Make sure that lock is opened and positioned as shown in detail 5.
Position hinged door (N) inside door opening as shown in detail 5.
Position hinge on top of two threaded studs in stand weldment (A) as shown in detail 6.
Once hinged door (N) is in place, fasten two M4 nylock nuts (Q) as shown in detail 6.
Close lock.
4
DOOR OPENING
DETAIL 5 DETAIL 6
N
N
NOTE: MAKE SURE THAT
LOCK IS POSITIONED
AS SHOWN
Attaching Hinged Door on back of Stand Weldment
Q
Secure adapter plate (D) to enclosure assembly (C) using four 1/4-20 knobs (F) as shown in detail 4.
Adapter plate (D) can be adjusted vertically buy loosening 1/4-20 knobs (F) as shown in detail 4.
3
DETAIL 4
C
F
FD
DOOR THREADED STUDS
ISSUED: 03-27-12 SHEET #:125-9290-3 05-21-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
6 of 7
Attach adapter brackets (B) to back of display using four M6 x 12 mm socket pin screws (K) with nylon shoulder
washer (J), or four M8 x 15 mm socket pin screws (L), or M8 x 20 mm socket pin screws (S) as shown in detail 6.
NOTE: Some displays may have offset hole patterns. When using offset hole patterns make sure that adapter
brackets (B) are centered on back of display.
5
Attaching Adapter Brackets to Display
300 mm
MAX VESA-600 mm
MIN VESA-200 mm
400 mm
BACK VIEW
Attach adapter brackets (E) and display onto channels on adapter
plate (D) as shown in detail 7.
Adapter Brackets (E) and display can be adjusted horizontally.
DISPLAY
CHANNEL
K, L, or S
J
E
TOP COVER
E
DETAIL 7
DETAIL 6
200 mm
ISSUED: 03-27-12 SHEET #:125-9290-3 05-21-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
7 of 7
IN OUT
TILT BACKWARD TILT RIGHT TILT LEFT
TILT FORWARD
Use legend below to determine position of display.
NOTE: Each knob can be adjusted independently for ne tuning adjustments.
6
Turn knob CLOCKWISE to tighten
Turn knob COUNTER-CLOCKWISE to loosen
Adapter Assembly Adjustment
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Peerless KL546-AW Installation guide
- Category
- Flat panel floor stands
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Peerless DST960 User manual
-
Peerless DS-VWC555-3X2 Product information
-
-
-
-
-
-
-
-