2. Crown Automotive
  3. RT27004

Crown Automotive RT27004 Installation guide

  • Hello! I've reviewed the installation instructions for the RT OFF-ROAD Door Grab Handle RT27004 set. This document outlines the steps for correctly installing the replacement door grab handles, along with a list of included parts. I'm ready to answer any questions you have about the product or the installation process.
  • What is included in the kit?
    What is the first step in the installation process?
    What should you ensure when installing the replacement handles?
YJ Door Grab Handle Set
Installation Instructions
P/N: RT27004
Kit Contents:
2 – Door Grab Handles
4 – Screws
4 – Handle Caps
1. Remove original door grab handles and clean the door panels.
2. Install replacement door grab handles using the supplied hardware. Ensure that the
handle caps remain straight when torquing the hardware.
While every attempt is made to ensure that the information contained in these instructions is correct, no liability can be accepted by the authors for loss,
damage, or injury caused by any errors in, or omissions from the information given. All service should be performed by qualified mechanics. Crown
Automotive Sales Co .,Inc. cannot be held responsible for any mechanical work performed. Standard and accepted safety precautions should be used in every
procedure.
/