Crown Automotive RT27004 Installation guide

Brand
Crown Automotive
Model
RT27004
Type
Installation guide
YJ Door Grab Handle Set
Installation Instructions
P/N: RT27004
Kit Contents:
2 – Door Grab Handles
4 – Screws
4 – Handle Caps
1. Remove original door grab handles and clean the door panels.
2. Install replacement door grab handles using the supplied hardware. Ensure that the
handle caps remain straight when torquing the hardware.
While every attempt is made to ensure that the information contained in these instructions is correct, no liability can be accepted by the authors for loss,
damage, or injury caused by any errors in, or omissions from the information given. All service should be performed by qualified mechanics. Crown
Automotive Sales Co .,Inc. cannot be held responsible for any mechanical work performed. Standard and accepted safety precautions should be used in every
procedure.
  • Page 1 1

Crown Automotive RT27004 Installation guide

Brand
Crown Automotive
Model
RT27004
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents