•Fitting:
O10: Die Cast Aluminium with clear bevelled glass
O11: Die Cast Aluminium with alabaster glass and clear bevelled glass
O19 / O20 / O68: Die Cast Aluminium with clear glass
O134: Die Cast Aluminium with alabaster lass
•Lamptype:
O10 / O11 / O19 / O20 / O68:Excluding 1 x E27 maximum 60W 230V
O134:Excluding 1 x E27 maximum 100W 230V
•Voltage: 220 – 240V~50Hz
•Protectionagainstelectricshock: Class 1. Requires earthing.
•IPRating: 44. Dust Protected.Protected against solid foreign objects of 1.0mm Ø and greater.
Protected against splashing water.
•Commercial/domesticuse
•Suitableforoutdooruse
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions:
O10 - 6 Panel (H)430mm x (W)140mm x (D)140mm
O11 - 4 Panel (H)450mm x (W)255mm x (D)255mm
O19 - 4 Panel (H)430mm x (W)150mm x (D)150mm
O20 - 6 Panel (H)440mm x (W)160mm x (D)160mm
O68 - 6 Panel (H)510mm x (W)220mm x (D)220mm
O134 - 6 Panel (H)530mm x (W)230mm x (D)230mm
•Spareglass:
O10: Code X013
O11: Code X489 (Top), X413 (Panel)
O19: Code X008
O20: Code X009
O68: Code X509
O134: Code X490
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Thisluminaireisonlysuitableforxedmounting.
•Chooseasolidbasewheretoinstallthexturetightly.
•Connectasindicatedintheconnectiondrawing.
•Fastenthexturetothewallsecurely.
•Connectthetwopowersupplywirestotheterminalblock,accordingtothepictures,observing
the colour code. Brown,Red to live / Blue,Black to neutral / Green -Yellow to earth.
•Fixlamprmlyintolampholder.
•Inserttheglass/lensetc.Andlockthesuppliedscrews.
•Reconnectpowersupply.
SPECIFICATIONS
O10/O11/O19/O20/O68/O134-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
IMPORTANTSAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured
IMPORTANT:
•Tamperingwiththisluminaire,IE.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminaire
must not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalrating.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/orsurfaces.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis