VICSEED CTEZ11 User guide

CTEZ11
Brand
VICSEED
Model
CTEZ11
Type
User guide

This manual is also suitable for

VICSEED CTEZ11 is a versatile car mount designed to provide a secure and convenient way to use your mobile phone while driving. With its two mounting methods, it can be easily attached to either your car's air vent or CD slot. The adjustable legs and ball joint allow you to position your phone at the perfect viewing angle, ensuring a safe and comfortable driving experience. Additionally, the quick-release button makes it easy to remove your phone from the mount when you reach your destination.

VICSEED CTEZ11 is a versatile car mount designed to provide a secure and convenient way to use your mobile phone while driving. With its two mounting methods, it can be easily attached to either your car's air vent or CD slot. The adjustable legs and ball joint allow you to position your phone at the perfect viewing angle, ensuring a safe and comfortable driving experience. Additionally, the quick-release button makes it easy to remove your phone from the mount when you reach your destination.

Attention
It is only suitable for horizontal and vertical air vent types. It
cannot support dense, circular or special-shaped air vents.
The suitability with car air vent
Specifications Product overview
The parameters above are derived from the laboratory of
VICSEED. The actual parameters may differ from product to
product or other factors. All images shown here are for
Product Name
Model
Applicable Places
Applicable Model
Product List
Car mount x1,
Air vent clip x1,
CD clamp x1,
User manual x1
CTEZ11
Air vent / CD slot
Mobile phone width (60-100) mm
and thickness 15mm.
Easy Clip Car Mount
Steps for clamp
1. Prevent the mount from falling off.
2. Please do not disassemble.
3. Please install the car mount in a suitable place before starting
your journey. Do not operate and adjust the car mount while
driving.
4. Do not install the car mount in a position that interferes with
the operation of the airbag or hinders driving.
5. Keep the car mount away from children.
Method 2 – use with the air vent clip
1. Unscrew the fixed nut completely. Let the ball joint pass
through
2. Push the ball joint firmly into the groove on the back of the
car
3. Twist the locking handle to adjust the opening of the clip
to fit the air vent.
1. Press the quick release button and the clamps automatical-
ly
open. Then, put your phone into the holder and pull the
adjustable
2. Press the clamp arms towards each other. Then, press
the
clamp arms with a little force again until you hear the
4. Please insert the car mount into a proper position of the air
vent.
Then tighten the locking handle to secure the car mount
firmly. Adjust the position of the car mount to match your
viewing angle.
Method 1- use with CD slot clamp
Assembly and installation steps
1. Unscrew the fixed nut completely. Then, let the ball joint
pass
2. Push the ball joint into the groove hard until it fall into the
socket, then tighten the fixed nut.
SHENZHEN HOMGMI TECHNOLOGY CO., LTD.
Add : RM 208, No.105-3, Jinyun RD, Buji ST, Longgang DIST,
Shenzhen, China
Email : [email protected]
Web : www.vicseed.com
Shenzhen Homgmi Technology Co., Ltd. All Rights Reserved.
Made in China
Customer service
12-month limited warranty
Lifetime technical support
[email protected]
@vicseedglobal
For more information, please visit:
www.vicseed.com
3. Insert the CD slot clamp into a proper position of the CD slot.
Let it go into the deepest position.
4.
Then, tighten the fixing screw
to secure the car mount and
adjust
Manually
pull down
Clamp Arms
Fixed Nut
Silicone Pads
Release Button
Adjustable Legs
Air Vent Clip
Supporting Plate
Ball Joint
Locking Handle
MAKE YOUR LIFE SIMPLE
HOLDER
Easy Clip Car Mount
CD Slot Clamp
Ball Joint
Fixed Rotating Screw
  • Page 1 1

VICSEED CTEZ11 User guide

CTEZ11
Brand
VICSEED
Model
CTEZ11
Type
User guide
This manual is also suitable for

VICSEED CTEZ11 is a versatile car mount designed to provide a secure and convenient way to use your mobile phone while driving. With its two mounting methods, it can be easily attached to either your car's air vent or CD slot. The adjustable legs and ball joint allow you to position your phone at the perfect viewing angle, ensuring a safe and comfortable driving experience. Additionally, the quick-release button makes it easy to remove your phone from the mount when you reach your destination.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents