2. Toro
  3. Lift Handle Kit, MB-1600 Mud Buggy

Toro Lift Handle Kit, MB-1600 Mud Buggy Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Lift Handle Kit, MB-1600 Mud Buggy Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3414-557RevA
LiftHandleKit
MB-1600MudBuggy
ModelNo.137-0591
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia
tocausecancer,birthdefects,orreproductiveharm.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
2
Nopartsrequired
–
Removetheexistinglifthandle.
Pivot1
Leverplate1
Leverassembly1
Shaftguide
1
Pin1
Clevispin
1
Cotterpin(1/2inch)
1
Bearing2
Bolt(1/4x2-1/4inches)
1
Cotterpin(1inch)
1
3
Nut(1/4inch)
1
Installthekitlifthandle.
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3414-557*A
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Engagetheparkingbrake.
3.Lowerthehopper.
4.Shutofftheengine.
2
RemovingtheExistingLift
Handle
NoPartsRequired
Procedure
1.Removethecowl.
2.Removethe2cotterpins,U-link,andclevispin
(3/16x1inch)fromthehandleassembly(Figure
1).Retaintheclevispin,butdiscardthe2cotter
pinsandU-link.
g210902
Figure1
1.Clevispin(3/16x1inch)
3.U-link
2.Cotterpin
4.Handleassembly
3.Removeanddiscardthehandleassembly
(Figure1).
4.Removeandretaintheangebolt(5/16x1
inch),nut(5/16inch),clevispin(3/8x1-3/32
inch)andcotterpin(3/4inch)asshowninFigure
2.
2
g210903
Figure2
1.Flangebolt(5/16x1inch)6.Shaftguide
2.Pivot
7.Nut(1/4inch)
3.Cotterpin(3/4inch)
8.Leverplate
4.Nut(5/16inch)9.Bolt(1/4x2-1/4inches)
5.Clevispin(3/8x1-3/32
inch)
5.Removeanddiscardthebolt(1/4x2-1/4inches),
nut(1/4inch),pivot,shaftguide(includingthe2
bearings),andleverplate(Figure2).
3
InstallingtheKitLiftHandle
Partsneededforthisprocedure:
1Pivot
1Leverplate
1Leverassembly
1
Shaftguide
1Pin
1
Clevispin
1
Cotterpin(1/2inch)
2Bearing
1
Bolt(1/4x2-1/4inches)
1
Cotterpin(1inch)
1
Nut(1/4inch)
Procedure
1.Installtheshaftguideusingtheangebolt(5/16
x1inch)andnut(5/16inch)thatyouremoved
previously,andthekitbolt(1/4x2-1/4inches)
andnut(1/4inch)asshowninFigure3.
g210914
Figure3
1.Bolt(1/4x2-1/4inches)4.Nut(1/4inch)
2.Shaftguide5.Nut(5/16inch)
3.Bearing(2)6.Flangebolt(5/16x1inch)
3
2.Installthebearingsintotheshaftguide(Figure
3).
3.Installthekitthroughtheshaftguideandhandle
assembly,andsecureitusingthecotterpin(1
inch)asshowninFigure4.
g210926
Figure4
1.Handleassembly
3.Clevispin
2.Cotterpin(1inch)
4.Slidethepivotthroughtheshaftguide,and
secureittotheyokeusingtheclevispin(3/8x
1-3/32inch)andcotterpin(3/4inch)thatyou
removedpreviously(Figure5).
g210927
Figure5
1.Pivot
4.Clevispin(3/8x1-3/32
inch)
2.Yoke5.Pin
3.Cotterpin(3/4inch)
6.Leverplate
5.Securetheotherendofthepivottothelever
plateusingapin(Figure5).
6.Securethehandletotheleverplateusinga
cotterpin(1/2inch)andtheclevispin(3/16x1
inch)thatyouremovedpreviously(Figure6).
g210928
Figure6
1.Cotterpin(1/2inch)2.Clevispin(3/16x1inch)
7.Installthecowl.
4
/