Furinno 18055 User guide

Type
User guide

This manual is also suitable for

3
Assembly Instruction
Furinno 9 CUBE CABINET
MODEL : 18055
1805520180803
wall
2
x2
5
(2) x 40pcs
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
Recomm. 2 Persons
Approx. 30 minutes
Tools Required
Wall stud
Use the 5/8" screw through the
round hole in a bracket and into
the back edge of the TOP (B).
Round hole
B
10
10
10
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
*Unit in Pound(lbs)
Recommended Maximum Weight
unfinished surface
1 2
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTION CAREFULY,
FOLLOW THEM STEP BY STEP.
ASSEMBLY INSTRUCTIONS
HARDWARE & PARTS LIST
2pcs
2pcs
SCREW
20pcs
SIDE PANEL
TOP / BOTTOM PANEL
BACK PLUG
40pcs
LONG DOWEL
8pcs
2pcs
SHELF PANEL
5pcs
BACK PANEL
6pcs
CENTER SIDE PANEL
SHORT DOWEL
8pcs
SCREW COVER CARD
20pcs
D
x2pcs
D
x2pcs
D
x2pcs
A
A
B
B
C
C
D
D
D
D
D
D
D
D
B
B
C
D
C
D
D
D
A
A
Unfinished edge
Unfinished edge
Unfinished edge
Unfinished edge
(1) x 16pcs
(1) x 2pcs
(4)
(3)
(1) x 2pcs
(4)
(3)
(4) x 8pcs
(3) x 8pcs
1
  • Page 1 1
  • Page 2 2

Furinno 18055 User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI