Aluminum Cabinet Installation Guide
for N-Series and S-Series
www.signamax.com
Note : Periodically check that all fasteners and components are securely tightened
If the Cabinet was purchased assembled, it is the owner’s responsibility, before insatalling any active
Component the Cabinet for the rst time, to make sure the Cabinet has been assembled and adjusted
exactly as written in this manual, and any “Special Instructions” supplied and to make sure all fasteners and
components are securely tightened.
Note: Images are only for simutaion. The images shown may not match your product’s color.
Introduction
This Owner’s Manual is made for several different cabinet
Some illustrations may vary slightly from the actual product
Follow instructions completely.
If the cabinet has any parts that are not described in this manual, look for separate “Special Instructions” that
are supplied with the cabinet.
Models may have different accessory items such as Perforated Front Door, Glass Door, Adapter etc.
Please read through this entire manual before beginning assembly or maintenance
Tools Needed
Phillips Screwdriver BitTorx Screwdriver Bit T25Drill Screwdriver
1 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
INSTALLATION LIST
N - SERIES S - SERIES
W=600, D=600 - 800
W=600, D=1000-1070-1200
W=800, D=600 - 800
W=600, D=1000- 1070-1200
W=600, D=600 - 800
W=600, D=1000-1070-1200
W=800, D=600-800
W=600, D=1000-1070-1200
4 4 4 4 4 4 4 4
22 26 14 18 22 26 14 18
22 26 14 18 22 26 14 18
4 4 28 28 4 4 28 28
4 4 4 4 4 4 4 4
4 4 4 4 4 4 4 4
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
4 4 4 4 4 4 4 4
2 2 2 2 2 2 2 2
0 0 4 4 0 0 4 4
4 4 4 4 4 4 4 4
2 0 2 0 2 0 2 0
0 4 0 4 0 4 0 4
0 2 0 2 0 2 0 2
1 1 1 1 1 1 1 1
1 1 1 1 0 0 0 0
1 1 1 1 0 0 0 0
DIN 912 M10X25 INBUS SCREW
DIN 912 M6X12 INBUS SCREW
DIN 125 M6 FLAT WASHER
M5 X12 TORX BOLT
M12X85 ADJUSTABLE FEET
M12*20 PLASTIC SCREW
BOTTOM FRAME ASSEMBLY
TOP FRAME ASSEMBLY
VERTICAL PROFILE
SIDE SUPPORT RAILS
SIDE SUPPORT ADAPTER
19" MOUNTING RAIL
SIDE PANEL
SPLIT SIDE PANEL
SPLIT SIDE PANEL MIDDLE PART
TOP COVER
REAR METAL SOLID PANEL
FRONT DOOR
FRONT&REAR PERFORATED FLAT DOOR
0 0 0 0 2 2 2 2
Note : Use the parts list included in this manual to verify that all parts are accounted for before assembly. If any
parts are missing, contact the retailer of this Cabinet for replacement parts
2 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assemble Adjustable feet at the Bottom Cover
3 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assemble
Vertical
Profiles
Insert each Vertical
Profile as shown
below
Fix the Vertical Profiles
from both inner sides by
using M10x20 Bolt
Do not over-tighten. This
will damage the bolt
4 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assemble
Top Frame
Fix the Top Frame
from outside by using
M10x20 Bolt
Do not over-tighten.
This will damage the
bolt
5 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assemble Top
Cover
Fix the Top Cover
from outside by using
M12x20 Plastic Bolt
Do not over-tighten.
This will damage the
bolt
6 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assemble Side Support Rails
Fix Left and Right
Supporting Rails with
4x M6 X12 Bolt
7 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assembling 19”
Mounting Rails
for 800 width
Fix Adapters on Side Support
Rails for left and right side
each Adapter has to be fixed
with M5 X12 Torx
8 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assemble 19”
Mounting
Rails for 800 width
Fix the Mounting Rails with
M5 X12 Torx
Mounting rails have to be fixed
from 3 point on the cabinet
Use the measuring tape and
choose a safe distance (from the
front door to the 19” mounting rails
9 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assemble 19” Mounting
Rails for 600 width
Fix the Mounting Rails with
M6 X12 Bolt
Mounting rails have to be xed from 3 point
on the cabinet
Use the measuring tape and choose a
safe distance (from the front door to the 19”
mounting rails
10 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
When you install
Side Panel make
sure locks are
unlocked.
Assemble
Double Side
Panel
11 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Drive the lugs in
the holes first.
The holes are
positioned on the
bottom cover
Screw Side Panel
profile by using
M6x12 Bolt
12 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Lock side panel back
13 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
14 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Drive the lugs in the holes rst.
The holes are positioned on
the bottom cover
Assemble
Single Side
Panel
When you install Rear
Panel make sure
locks are unlocked.
15 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Drive the lugs in the holes first.
The holes are positioned on the
bottom cover
Assemble
Rear Panel
Fix the Rear Door
Locking Point by
using M6 X12 Bolt
16 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
17 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
Assembling
Front Door
Insert Pin
18 | Aluminum Cabinet Installation Manual
www.signamax.com
sales@signamax | P. 1-800-446-2377
w
ww.signamax.com
CONNECT WITH US
Signamax Corporate
999 NW 159th Dr, Miami, FL 33169 •
800.446.2377 / 305.944.7710
AUSTRALIA
8 Port Kembla Dr, Perth,
Bibra Lake, WA 6163
Australia
T: +61 89 202 800
E: AP[email protected]
INDIA
A-74 FIEE Complex, OKHLA
Indust. Park Phase II New
Delhi, 110020
India
T: +91 114 106 9843
MIDDLE EAST
No 3 Reviera Hotel, Baniyas Rd,
Deira, Dubai
United Arab Emirates T: +97 155
424 2722 E: [email protected]
SOUTH EAST ASIA 55
UBI Ave 1,
#02-10 UBI 55
Singapore, 408935 T:
+65 6925 5798 E:
CANADA
2-975 Bleams Rd, Kitchener,
Ontario Canada
N2E3Z5
T: +1 519 570 3911 E:
MALAYSIA
Suite 1.2, 1st Floor Bangunan THK
No.2A Jalan 243 Seksyen 51a
46100 Petaling Jaya, Selangor,
Malaysia T: +60 3-7873 7317 E:
SRI LANKA
49 Sri Jinarathana Rd Colombo 2,
Sri Lanka
T: +94 114 792 100 E:
UK
7-10 Chandos Street,
London, W1G 9DQ
United Kingdom
T: +44 20 358 22933
International Sales Offices:
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
SignaMax N-Series Aluminum Network Cabinets Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SignaMax N-Series Steel Network Cabinets Installation guide
-
SignaMax IP Managed Power Distribution Units User manual
-
SignaMax Gigabit Ethernet Media Converters User guide
-
SignaMax 10/100/1000 to 100/1000 SFP Media Converter User guide
-
SignaMax 16-Bay Rack Mount Media Converter Chassis User guide
-
SignaMax 100FX Singlemode To Multimode Media Converters User guide
-
SignaMax 065-1100NS User guide
-
SignaMax Gigabit Ethernet Media Converters User guide
-
SignaMax 10/100/1000BaseT/TX to 1000BaseSX/LX Converter Series User guide
-
SignaMax F0-065-1200 Series User guide
