Grip-Rite SLG4250LWE Specification

Brand: Grip-Rite

Model: SLG4250LWE

Type: Specification

ShingleLayment

Synthetic Roong Underlayment

GRSLBRO

01/2016

The time to convert from asphalt felt is NOW, with

the Grip-Rite

ShingleLayment

series of synthetic

underlayments.

Grip-Rite Synthetic Underlayments

are available in three

styles that are designed to replace both #30 and #15

saturated felt in roong applications.

Grip-Rite ShingleLayment

is lighter, stronger, and more

energy efcient than felt. ShingleLayment’s 10 square roll size

saves costly labor and reduces waste, providing your roof

with a durable temporary cover and long lasting secondary

water shedding protection.

1. Products:

ShingleLayment

Premium Synthetic Underlayment

ShingleLayment-15

Synthetic Underlayment

ShingleLayment-LWE

Synthetic Underlayment

2. Manufacturer:

PrimeSource Building Products, Inc.

1321 Greenway Drive, Irving, TX 75038

800-676-7777

www.primesourcebp.com|www.grip-rite.com

3. Product Descriptions:

All Grip-Rite Synthetic Underlayments are made from

tough woven polypropylene. These high tensile substrates

resist tearing and blow-off from high wind exposure. All are

UV treated to 180 days. Grip-Rite Shinglelayment is evenly

rewound, rolls out at, and holds a chalk line.

ShingleLayment Premium synthetic underlayment is a heavy

weight woven 10x10 scrim polypropylene underlayment

coated with a non-skid TPO. ShingleLayment can be used

in any code-compliant mechanically attached roong

application.

ShingleLayment-15 is a woven 10x10 scrim polypropylene

substrate coated on the walking surface with a spun bonded

non-woven that provides non-skid traction. Both top and

bottom surfaces are textured to provide traction underfoot

and on the roof deck. ShingleLayment can be used under any

code-compliant mechanically attached roong application.

ShingleLayment-LWE is a lightweight version of our proven

Premium Grip-Rite ShingleLayment. Woven 8x8 scrim

polypropylene substrate coated with a non-skid TPO on

the walking surface. Both top and bottom surfaces are

textured to provide traction underfoot and on the roof deck.

ShingleLayment can be used under any code-compliant

mechanically attached roong application.

Application:

Grip-Rite Synthetic Underlayments are a water shedding

device designed to reduce the occurrence of leaks caused by

wind-driven rain, penetrating the primary roof system

coverings as well as a temporary cover on exposed roof

decks.

It is used on steep-slope roofs beneath shingles, battened

tiles, metal roong, slate, wood shake and shingle, and

simulated slate/shake prepared roof coverings as an alternate

to ASTM D226, Type I or II or ASTM D4869 Type IV asphalt

felts.

Features:

ShingleLayment Premium

 Nearly 5 times lighter than #30 felt

 4.6 times more coverage than #30 felt

 Non-skid TPO coating

 20 year limited warranty

 Exclusive patent pending shingle pattern

 Printed nail and overlap pattern

 Available in two energy efficient colors, white/gray or tan

ShingleLayment-15

 Nearly 5 times lighter than #15 felt

 2.3 times more coverage than #15 felt

 Non-skid SBPP non-woven coating

 10 year limited warranty

 Printed nail and overlap pattern

 Textured top and bottom surface for increased friction

ShingleLayment-LWE

 Nearly 5 times lighter than #15 felt

 2.3 times more coverage than #15 felt

 Non-skid TPO coating

 10 year limited warranty

 Exclusive patent pending shingle pattern

 Printed nail and overlap pattern

 Textured top and bottom surface for increased friction

ShingleLayment

Synthetic Roong Underlayment

4. Standards and approvals

All ShingleLayment models:

AC188

ASTM D226

ASTM D4869 Type IV

Class A Fire Tested

CAN CSA A123.3-05

Premium ShingleLayment

ICC ESR-2945

Miami Dade NOA No. 14-0520.11

Florida Statewide Products Approval File No. FL12510

5. Installation:

All ShingleLayment

shall be installed in compliance with the

codied requirements for ASTM D226, D4869 or underlayment

for the type of prepared roof covering to be installed.

Instructions:

Re-fasten any loose decking panels and check for protruding

nail heads. Sweep the substrate thoroughly to remove any dust

and debris prior to application. Corrosion-resistant fasteners

shall be plastic cap nails or staples with a minimum nominal

1 in. diameter head. The use of cap staples should be limited

to installations that will be covered by the nal roong system

within 30 days as the membrane will be less resistive to the

elements which may result in blow-off.

Grip-Rite fasteners are recommended. Ensure fasteners

are installed at 90 degree angle to the deck with ush

contact between the plastic cap and the upper surface of the

underlayment.

Where local code requires metal cap washers, Grip-Rite

Tin-Caps are recommended.

ShingleLayment shall be installed horizontally with the printed

side up, and with 4 in. horizontal laps and 6 in. vertical laps.

Horizontal laps shall be in a shingle pattern, running with the ow

of water.

Single Layer; Roof Slope > 4:12:

Starting at the eave, fasten the eave edge 8 in. OC and vertical

laps 8 in. OC, and 24 in. OC down the center of the roll.

Continue upslope in a similar manner, maintaining minimum 4

in. horizontal and minimum 6 in. vertical laps. Fasten 8 in. OC at

horizontal laps and 8 in. OC at vertical laps and 24 in. OC down

the center of the roll. Ensure all vertical laps are staggered at

least 3 ft. apart. In high wind zones (V-asd > 110 mph 3 second

gust design wind speed), increase the fastening schedule to 4

in. OC at horizontal laps, 4 in. OC at vertical laps, and 24 in. OC

down the middle of the roll in the eld of the roof.

Double Layer; 2:12 < Roof Slope < 4:12:

Starting at the eave, fasten the eave-edge of a half-width

starter-strip 8 in. OC and vertical laps 8 in. OC Continue upslope

in a similar manner, with minimum 24 in. horizontal laps and

minimum 6 in. vertical laps. Fasten 8 in. OC along the low edge

and 8 in. OC at vertical laps and 24 in. OC down the center of

the roll. Ensure all vertical laps are staggered at least 3 ft. apart.

In high wind zones (> 110 mph 3 second gust design wind

speed), increase the fastening schedule to 4 in. OC at horizontal

laps, 4 in. OC at vertical laps, and 24 in. OC down the middle of

the roll in the eld of the roof.

ShingleLayment 15

ShingleLayment

Synthetic Roong Underlayment

Physical Properties

Properties Standard

ShingleLayment

Premium

ShingleLayment-15

ShingleLayment-LWE

ASTM D226

Type II

ASTM D4869

Type IV

Accelerated Aging AC188 Pass Pass Pass N/A N/A

UV Exposure AC188 Pass Pass Pass N/A N/A

Pliability D226 Pass Pass Pass Pass Pass

Liquid Water

Transmissions

ASTM D4869 Pass Pass Pass N/A Pass

Loss on Heating (%) ASTM D228 0.4 1 0 4 6

Thickness ASTM D3767 8.5 mils 8.70 4.7 — —

Temperature Range AC 188

-55°C/-67°F

–110°C / 230°F

-67°F – 230°F -67°F – 230°F — —

Permeance

ASTM E96

desiccant

method

0.10 0.10 0.07 — —

Breaking Strength (lb./ft.)

Control ASTM D146 118/116 86/54 80/84 40/20 40/20

6. Precautions & Limitations:

 Depending on roof pitch and surface conditions (wet, dusty, frost), the coefcient of friction may change, and can

become slippery. Use caution.

 Use caution when walking on roof deck and use OSHA compliant fall protection.

 Do not walk or stand on ShingleLayment until it is attached to roof deck according to installation instructions.

 Shingle print pattern is not intended for use as an installation grid for nal roong surface shingles.

 ShingleLayment is not designed as a primary roof covering. Exposure beyond 30 days without nal roof covering may subject the

sheet to jobsite abuse, chemical exposure, and severe weather.

 ShingleLayment may not be used in any exposed application such as crickets, exposed valleys, or exposed roof to wall details.

 Attic spaces must be property ventilated in accordance with the local Building Code.

 Minimum roof pitch: 2:12 (9.4°).

Installation for batten-secured

roof cover:

When battens are installed over Grip-Rite

ShingleLayment, the underlayment need

only be preliminarily attached in advance

of batten installation. Ensure preliminary

underlayment attachment does not

interfere with batten locations. Where

seams or joints require sealant or adhesive,

use only high quality, low solvent asbestos

free plastic roong cement meeting ASTM

D4586, Type I. Install a leak barrier of

ASTM D1970 or approved equal at vulnerable leak areas, including but not limited to eaves, valleys, rakes, skylights and dormers. At

eaves and valleys, install the leak barrier prior to installation of ShingleLayment. Along the rake, install ShingleLayment leaving 6 to 8

in. of the deck exposed, and then install the leak barrier over the ShingleLayment and exposed decking. At other areas, install the leak

barrier over the ShingleLayment.

Physical properties subject to change without notice. Manufacturing variance 5-10%.

Premium ShingleLayment ShingleLayment-LWE

ShingleLayment

Synthetic Roong Underlayment

Grip-Rite ShingleLayment

Premium Roll Packaging

SKU

Size

Print Color

Weight/

Roll

Rolls/

Pallet

Pallets/

Truckload

Rolls/

Truckload

Area Dimensions

SLW4100GRI 4 SQ 4 ft. x 100 ft. Installer Light Gray 13 lb. 90 36 3,240

SLW4100GRS 4 SQ 4 ft. x 100 ft. Shingle White 13 lb. 90 36 3,240

SLT4100GRS 4 SQ 4 ft. x 100 ft. Shingle Tan 13 lb. 90 36 3,240

SLW4250GRI 10 SQ 4 ft. x 250 ft. Installer Light Gray 30 lb. 35 36 1,260

SLT4250GRI 10 SQ 4 ft. x 250 ft. Installer Tan 30 lb. 35 36 1,260

SLW4250GRS 10 SQ 4 ft. x 250 ft. Shingle White 30 lb. 35 36 1,260

SLT4250GRS 10 SQ 4 ft. x 250 ft. Shingle Tan 30 lb. 35 36 1,260

Grip-Rite ShingleLayment-LWE

Roll Packaging

SLG4250GRE 10 SQ 4 ft. x 250 ft. Shingle Gray 18.7 lb. 72 35 2,520

SLG4250LWE 10 SQ 4 ft. x 250 ft. Installer Gray 18.7 lb. 72 35 2,520

Grip-Rite ShingleLayment-15

Roll Packaging

SL154250GR 10 SQ

4 ft. x 250 ft.

Installer Gray 22 lb.

49 36 1,764

Grip-Rite ShingleLayment® is distributed by PrimeSource Building Products, Inc.

Premium Installer

Pattern - Tan

Premium Installer

Pattern - White/Gray

ShingleLayment-15

Installer Pattern - Gray

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

OVER LAP LI NE

OVER LAP LI NE OVER LAP LIN E

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Grip-Rite ShingleLaymentGrip-Rite ShingleLayment

SHI NGLE PR INT PATTE RN IS NOT I NTEND ED FOR US E AS AN INS TALLAT ION GRI D FOR FIN AL ROOF ING SUR FACE SHI NGLE S

SHI NGLE PR INT PATTE RN IS NOT I NTEND ED FOR US E AS AN INS TALLAT ION GRI D FOR FIN AL ROOF ING SUR FACE SHI NGLES

ICC-ES ESR #2945 ICC-ES ESR #2945

Grip-Rite ShingleLayment

OVER LAP LIN E

OVER LAP LIN E OVER LAP LIN E

Grip-Rite ShingleLayment

SHI NGLE PR INT PATTE RN IS NOT I NTEND ED FOR US E AS A

N INS TALLATI ON GRID F OR FINA L ROOFI NG SURFA CE SHI NGLES

SHI NGLE PR INT PATTE RN IS NOT I NTEND ED FOR US E AS AN INS TALLAT ION GRI D FOR FIN AL ROOF ING SUR FACE SHI NGLES

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

ICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

OVER LAP LI NE

OVER LAP LIN E

OVER LAP LI NE

OVER LAP LI NE OVER LAP LIN E

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Grip-Rite ShingleLayment

SHI NGLE PR INT PATTE RN IS NOT I NTEND ED FOR US E AS A

N INS TALLATI ON GRID F OR FINA L ROOFI NG SURFA CE SHI NGLES

SHI NGLE PR INT PATTE RN IS NOT I NTEND ED FOR US E AS AN INS TALLAT ION GRI D FOR FIN AL ROOF ING SUR FACE SHI NGLES

ICC-ES ESR #2945

Grip-Rite ShingleLayment

OVER LAP LIN E

OVER LAP LIN E OVER LAP LIN E

Grip-Rite ShingleLayment

SHI NGLE PR INT PATTE RN IS NOT I NTEND ED FOR US E AS AN INS TALLAT ION GRI D FOR FIN AL ROOF ING SUR FACE SHI NGLES

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

ICC-ES ESR #2945 ICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES

AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

Underwriters Laboratories

Verified to ICC-ES AC10

and AC 304

Grip-Rite ShingleLaymentICC-ES ESR #2945

OVER LAP LIN E

OVER LAP LIN E OVER LAP LIN E

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Grip-Rite ShingleLaymentGrip-Rite ShingleLayment

SHIN GLE PRI NT PATTE RN IS NOT I NTEND ED FOR US E AS AN INS TALLAT ION GRI D FOR FIN AL ROOF ING SUR FACE SHI NGLES

ICC-ES ESR #2945 ICC-ES ESR #2945

Grip-Rite ShingleLayment

OVER LAP LIN E

OVER LAP LIN E OVER LAP LIN E

Grip-Rite ShingleLayment

SHIN GLE PRI NT PATTE RN IS NOT I NTEND ED FOR US E AS AN INS TALLAT ION GRI D FOR FIN AL ROOF ING SUR FACE SHI NGLES

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

Underwriters Laboratories

Verified to ICC-ES AC10 and AC 304

ICC-ES ESR #2945 ICC-ES ESR #2945

Premium Shingle

Pattern - Tan

Premium Shingle

Pattern - White

ShingleLayment-LWE

Shingle Pattern - Gray

ShingleLayment-LWE

Installer Pattern - Gray

800-676-7777

www.grip-rite.com

www.primesourcebp.com

Grip-Rite SLG4250LWE Specification

Grip-Rite SLG4250LWE Specification

Grip-Rite SLG4250LWE Specification

Related papers

Other documents