Page is loading ...
SKYBELL - USER MANUAL
FCC ID: 2ADLJSKYBELL
The device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
-PRODUCT INTRODUCTION-
Congratulations on purchasing the Vortex SkyBell Home Phone! The SkyBell Home Phone is a Fixed
Wireless Terminal that provides users a home phone system compatible with an analog phone that uses
a GSM SIM Card instead of fixed line broadband. Before using this terminal, please read this user guide
carefully.
This is our new design, which uses GSM networks to operate. You can dial local, domestic and
international calls with the SkyBell, connecting with a common wired desktop phone and a standard SIM
card. It is widely used in these areas:
● Homes
● Remote country
● Mountains
● Public telephone shops
● Offices
● Mobile places such as ships, trains, and long-distance buses
Our SkyBell Home Phone also has these characteristics as below:
● Easy to install
● Easy to operate
● Powerful capacity to receive signal
● Clear voice quality Long life
● Steady performance
-KEY TECHNICAL SPECIFICATIONS-
● Network support: GSM 850/900/1800/1900MHz
● Frequency range:
○ TX Frequency Range: 880~915MHz, 1710~1785MHz 824~849MHz, 1850~1910MHz
○ RX Frequency Range: 925~960MHz, 1805~1880MHz 869~894MHz, 1930~1990MHz
● Voltage: DC 5V
● Power consumption: Static ≤ 25MA, In Use ≤ 500MA
● Peak power consumption: 0.25W/0.5W
● Receive sensitivity: -104db
● Antenna increment: All directions: 5.0db
● Certain/Selection: 12db
-KEY FUNCTIONS-
● Can dial local calls, mobile calls, international calls and special free calls;
● Password authority administrable;
● volume adjustable;
● Time and Date configurable;
● Supports USB modem function, support: Windows XP; Windows Vista; Windows 7; Windows 8; Windows
10;
● Cautions and Storage
-CAUTIONS-
● The SkyBell should not be used at garage, oil storage, and chemical plant or near any flammable or
explosive substance.
● This SkyBell should not be used in a hospital. It will interfere with medical electronic equipment such as
pacemaker and audiphones.
● If it is found that the SkyBell cannot successfully login to the network, please check whether the SIM card
or antenna is properly installed.
● Do not touch the antenna when the SkyBell is being used to make or receive calls, otherwise the SkyBell
will be damaged. This kind of damage is beyond the range of warranty.
● When the SkyBell is being used, it should be placed where signal is strong enough. To ensure good voice
quality, the SkyBell should be far from other electronic equipment.
● Do not use chemical substance to clean the SkyBell, instead use a dry soft cloth to clean it.
● Don't disassemble the SkyBell by yourself. If there is any problem, please contact the authorized
personnel.
-STORAGE-
● Do not stack more than 10 SkyBell in storage.
● The SkyBell should be stored in a ventilated and dry place.
● Do not knock over the SkyBell to avoid breaking the case.
This user guide provides information on the use and operation of your FWT.
Kindly read all the information contained in this user guide carefully prior to
using the Phone. This will help you in getting the best performance and shall
prevent any unintended damage to the device. Check the contents of the box
as per the packing list and report any discrepancies immediately to the store
from where the device has been purchased.
-DO’S & DON’TS-
● Do not clean the SkyBell while in operation. Before attempting to clean the SkyBell, turn it off and
disconnect the external power adapter. Use a damp cloth for cleaning. Do not use liquid or
aerosol cleaners.
● Do not hold the antenna. This may affect call quality and cause the SkyBell to operate at
unintended power levels.
● Keep the antenna free from obstructions and position the antenna straight up. This will ensure
best call quality.
● Do not use a damaged antenna. Have this replaced through a qualified technician. Only use the
antenna approved by the manufacturer. Unapproved antenna may impair the call quality as well
as cause damage to the SkyBell.
● Do not attempt to change the security codes or components. User is responsible for any
consequences arising out of such attempt.
● Avoid shock or impact. Rough handling can cause damage to the SkyBell body and internal
circuits.
● Do not paint.
● During lightning do not touch the power plug or SkyBell cables. This can cause Electric shock,
even death. Do not touch the antenna.
● Your SkyBell works with 100-240V AC. Check the voltage before connecting.
● Do not plug many power cords into the outlet.
● Do not touch the plug with wet hands. Always grasp and pull the plug, not the cord. Do not put
heavy things on the power cord or bend it too much.
● If the SkyBell is not working for any reason, do not attempt to repair it. The SkyBell should be
serviced by qualified service personnel only.
● Place the SkyBell and the power supply in a properly ventilated place.
● Do not place the SkyBell near high temperature objects, under direct sunlight, near source of
water, near fire or near inflammable and explosive materials.
● Do not place any foreign objects over the SkyBell.
● Place the SkyBell in a dry place and do not expose to moisture.
● Place the SkyBell away from other electronic devices like TV and Radio to avoid interference.
● For a better reception, do not place the Instrument in a building with iron or metal roof.
● Hospitals or health care facilities may use equipment which is sensitive to Radio
● Frequencies. Please ensure that your SkyBell is turned “OFF” while near such facilities.
● Do not use the SkyBell in designated “No FWT Use” area.
-CONNECT THE SKYBELL HOME PHONE-
-CONNECTING YOUR SERVICE PROVIDER-
To use the networks services available in your SkyBell, you will need to sign up with a wireless
provider and purchase a SIM (Subscriber Identity Module) Card or purchase a prepaid SIM card.
In many cases, the wireless provider will make available descriptions of its services and
instructions for using its features. Wireless providers may differ in their support of features. Before
you sign up, make sure the wireless provider supports the features that you need.
-INSTALLING THE ANTENNA-
1. Choosing a proper place for the SkyBell and antenna is the important first step for installation.
You can use your mobile phone to search for the place where the strongest signal is. Then put
the SkyBell here.
2. Screw the antenna into the port in the back of the SkyBell.
3. Please do not place the antenna and the SkyBell too close to a TV set, computer, or radiogram. It
will disturb the signal of the SkyBell.
-INSERTING A SIM CARD-
Make sure the SkyBell is switched off and the AC adapter is unplugged: insert the SIM card only
when the SkyBell is switched off and the AC adapter is unplugged. Follow the instructions below
to insert a SIM Card into the SkyBell.
1. Screw off the screw of SIM card case, and open the cover.
2. Slide back the SIM card door and lift it up.
3. Slide the SIM card into the SIM door making sure that the clipped corner of the SIM card
lines up with the clipped corner of the SIM holder.
4. Close the SIM card door and slide it to lock the SIM card in place.
5. Replace the cover of SIM card case and fixes it with a screw.
-CONNECTING YOUR SKYBELL WITH DESKTOP PHONE-
If you want to use the SkyBell to make calls, you should connect the SkyBell with a common
wired desktop phone.
There are two communication portals at the back of the SkyBell. You can connect one desktop
phone and billing machine (optional) with our SkyBell. It’s very easy to connect the phone and
SkyBell using a common communication cable.
-OPERATION & SETTING-
1. Power on/off the FWT
a. There is a toggle switch on the back of the FWT
2. Date and Time setting and query 2.1
a. Date Query command: **1010*1#
Response Confirmation Tone if successful and device will display Year,Month,Day.
The below photo is a sample response:
3. Time Query Command: **1010*2#
Response Confirmation Tone if successful and device will display hour and minute.
The below photo is a sample response:
4. Set time command: **2011*MMMM*YYMMDDHHMM#
Response Confirmation Tone if successful
MMMM is password, default password is 0505
YYMMDDHHMM is year (YY) month (MM) day (DD) hour (HH) minute (MM)
5. Version Query Command: **1010*0#
Response Confirmation Tone if successful and device will display current Software version number.
The below photo is a sample response:
-1. DIALING-
● Pick up the handset and input desired number after hearing dialing tone;
● Press “#” key after inputting desired number to dial it immediately, it will be dialed out automatically after 4
seconds if you don’t press “#” key;
● The LCD will display like the below photo:
-2. PICK UP PHONE CALL-
● When the SkyBell rings that means there is new call incoming, the LCD will display the above
photo, pick up handset to proceed conversation, and then it will show the below photo:
Return handset to the base after conversation completed. The LCD will show the below photo with the total
call timer:
Return handset to the base after conversation completed. The LCD will show the below photo with the total
call timer:
-SPECIAL SETTING COMMANDS-
-PACKING LIST-
With the SkyBell Home Phone, some important accessories are packed. When you get the SkyBell please check
them and to see whether you have all of them. Please contact us or call the distributor in your area to receive the
absent parts if you find that you lack one of them as below:
/
