4 | Dell PowerConnect W-Series ArubaOS 6.1 | User Guide
Create a VLAN Pool Using CLI .......................................................................................61
Viewing Existing VLAN IDs Using CLI ...........................................................................61
Adding Existing VLAN IDs Using CLI.............................................................................61
Add a Bandwidth Contract to the VLAN...............................................................................62
Optimize VLAN Broadcast and Multicast Traffic ................................................................62
In the CLI............................................................................................................................62
In the WebUI .....................................................................................................................63
Configuring Ports..............................................................................................................................63
Classifying Traffic as Trusted or Untrusted .........................................................................63
About Trusted and Untrusted Physical Ports ..............................................................63
About Trusted and Untrusted VLANs............................................................................63
Configuring Trusted/Untrusted Ports and VLANs...............................................................64
Using WebUI .....................................................................................................................64
Using CLI............................................................................................................................64
Configure Trusted/Untrusted Ports and VLANs in Trunk Mode .......................................65
Using the WebUI ..............................................................................................................65
Using CLI............................................................................................................................65
About VLAN Assignments...............................................................................................................65
How a VLAN Obtains its IP Address......................................................................................66
Assigning a Static Address to a VLAN..................................................................................66
Using the WebUI ..............................................................................................................66
Using CLI ....................................................................................................................................66
Configuring a VLAN to Receive a Dynamic Address..........................................................66
Configuring Multiple Wired Uplink Interfaces (Active-Standby) .............................67
Enabling the DHCP Client........................................................................................................67
Using the WebUI ..............................................................................................................67
Using the CLI .....................................................................................................................67
Enabling the PPPoE Client.......................................................................................................68
Using the WebUI ..............................................................................................................68
Using CLI............................................................................................................................68
Default Gateway from DHCP/PPPoE.....................................................................................68
Using the WebUI ..............................................................................................................68
Using CLI............................................................................................................................68
Configuring DNS/WINS Server from DHPC/PPPoE............................................................68
Using the WebUI.......................................................................................................................69
Using CLI............................................................................................................................69
Configuring Source NAT to Dynamic VLAN Address.........................................................69
Using the WebUI ..............................................................................................................69
Using CLI............................................................................................................................70
Configuring Source NAT for VLAN Interfaces.....................................................................70
Example Configuration ....................................................................................................70
Using the WebUI ..............................................................................................................70
Using CLI............................................................................................................................71
Inter-VLAN Routing ..................................................................................................................71
Using the WebUI to restrict VLAN routing...................................................................71
Using CLI............................................................................................................................72
Configuring Static Routes ...............................................................................................................72
Using the WebUI.......................................................................................................................72
Using CLI ....................................................................................................................................72
Configuring the Loopback IP Address ..........................................................................................72
Using the WebUI.......................................................................................................................72
Using CLI ....................................................................................................................................73
Using the CLI to reboot the controller...................................................................................73
Configuring the Controller IP Address ..........................................................................................73
Using CLI ....................................................................................................................................74
Configuring GRE Tunnels.................................................................................................................74
Creating a Tunnel Interface....................................................................................................74