Doc#: D-361T538Fxx Rev. Level B Date: June 2003
1
OPERATOR'S MANUAL 361T538Fxx
361T538Fxx 1 1/4in. FILTER ASSEMBLY
IMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING,
OR SERVICING THIS EQUIPMENT
FILTER ASSEMBLY PART NUMBERS
361T538FSP STAB POINT Large orifice
361T538F03 30 Mesh Element .022 in. orifice
361T538F04 40 Mesh Element .015 in. orifice
361T538F06 60 Mesh Element .010 in. orifice
361T538F09 90 Mesh Element .0065 in. orifice
WHEN REPAIRING THE FILTER TURN OFF THE
PUMP SUPPLY PRESSURE AND BLEED THE
MATERIAL PRESSURE FROM THE PUMPING
SYSTEM AND FILTER BOWL.
MAINTENANCE
Replace the Filter element when there is a 500-
pound pressure drop across it.
Note: Material must be flowing to check the
pressure drop.
REBUILDING INSTRUCTIONS
1) Close the ball valves and depressurize the
filter by opening the bleeder valve.
2) Unscrew the Filter Bowl and remove the
Element.
3) Clean the Filter Bowl and Housing.
4) Replace the O’ring and Back-up Ring and
lubricate.
5) Install new Element in the Filter Housing.
6) Thread on the Bowl and tighten to 50 Ft. Lbs.
364
-
295
ViISUAL INDICATOR
r 120PSI
FILTER ELEMENT
361T538ESP STAB POINT
361T538E03 30 MESH
361T538E04 40 MESH
361T538E06 60 MESH
361T538E09 90 MESH
350
-
214
HP STREET
ELBOW
360
-
003
O’RING
362
-
333
TEFLON
BACK-UP
RING
300-847
BLEEDER
VALVE
1
1/4 in. NPT
Threads
361T538RK
REPAIR KIT
INCLUDES:
(1) 360-003 O’RING
(1) 362-333 BACK-UP
RING
409
-
464
BRACKET
Ingersoll
-
Rand
1872 Enterprise Drive Phone (248) 293-5700
Rochester Hills MI 48309 Tech Support (866) 284-5509
350
-
292
O-Ring (2)
-
1
Ingersoll-Rand 361T538Fxx User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Ikelite 6851.3 User manual
-
-
-
-
-
-
-
-
Domino A-Series Operation and Maintenance Manual
-
Graco 306987J User manual
