Apantac SDM-SDI-HDTV-UHD User manual

Brand: Apantac

Model: SDM-SDI-HDTV-UHD

Type: User manual

Apantac SDM-SDI-HDTV-UHD is an Intel SDM-based 12G SDI receiver that allows you to input 12G/6G/3G HD-SDI signals into any display equipped with an Intel SDM-S or SDM-L slot. It supports a maximum resolution of 3840x2160@60Hz and outputs HDMI 2.0 RGB 4:4:4 signals. The device features a built-in SDI loop out and supports various signal formats, including REC 709/2020, YCbCr, and RGB.

Intel SDM based

12G SDI Receiver

USER MANUAL

SDM-SDI-HDTV-UHD

USER MANUAL v.1.2

Overview

The SDM-SDI-HDTV-UHD can be installed in any display that is equipped with Intel

SDM-S or SDM-L slot. The SDM-SDI-HDTV-UHD can accept 12G/6G/3GHD-SDI signals

Package Contents

§ 1 x SDM-SDI-HDTV-UHD

§ 1 x User manual

§ 1 x SDM-S mounting bracket

Features

n Supports 12G/6G/3G/HD-SDI signals

n Built-in SDI loop out

n Outputs HDM 2.0 RGB 4:4:4@ 60Hz via the SDM connectors

n Maximum Power Consumption 9.5W

Specifications

Function

SDM-SDI-HDTV-UHD

SDM Edge Connector

Intel SDM PCIex8(98pin) x1

SDI In

BNC

SDI Out

BNC

Status LEDs

4 in 1 LED

Max Resolution

3840x2160@60Hz

Cable Reach

12G – 70m, 3G – 190m, 1.5G – 260m

Mounting Brackets

SDM-S, SDM-L

Environment

Operating temperature - 0C ~ 55C

Humidity: 20% ~ 90% / non-condensing

Weight

230g without packaging

Dimensions (LxWxH)

Board -60x110x20, SDM-S – 80x124x25

FRONT VIEW

1. SDI input

2. Status LED – Power, HDCP, LINK, MODE

• POWER – Green = On

• STATE – Green = System booted properly

• INPUT – Green = SDI input detected properly

• LOOP – Flashing = Loop out working properly

3. SDI loopout

4. Audio pair selection

SDM-S Mounting Bracket

Assembly

SDM-S

SUPPORTED FORMATS

10200 SW Allen Blvd, Suite C

Beaverton, OR 97005, USA

PHONE +1 503 968 3000, FAX +1 503 389 7921

The content of this document is provided in connection with Apantac LLC (“Apantac”) products.

Apantac makes no representation or warranties with respect to the accuracy or completeness of the

contents of this publication and reserves the right to make changes to specification and product descriptions

at any time without notice

SUPPORTED SIGNAL TYPE/FORMATS

12G-SDI REC 709/2020 output follows input

3840x2160

YCbCr 4:2:2 60p/59.94p/50p 10 bit

YCbCr 4:4:4 30P/29.97p, 25p, 24p/23.98p 10 bit

RGB 4:4:4 30p/29.97p, 25p, 24p/23.98p 10 bit

4096x2160

YCbCr 4:2:2 60p/59.94p/50p 10 bit

YCbCr 4:4:4 30P/29.97p, 25p, 24p/23.98p 10 bit

RGB 4:4:4 30p/29.97p, 25p, 24p/23.98p 10 bit

6G-SDI REC 709/2020 output follows input

3840x2160 YCbCr 4:2:2 30p/29.97p/25p, 24p/23.98p

3G-SDI Level A REC 709/2020 output follows input

1920x1080

YCbCr 4:2:2 60p/59.94p/50p 10 bit

YCbCr 4:4:4 30P/29.97p, 25p, 24p/23.98p, 60i/59.94i/50i 10 bit

RGB 4:4:4 30p/29.97p, 25p, 24p/23.98p, 60i/59.94i/50i 10 bit

2048x1080

YCbCr 4:2:2 60p/59.94p/50p 10 bit

YCbCr 4:4:4 30P/29.97p, 25p, 24p/23.98p 10 bit

RGB 4:4:4 30p/29.97p, 25p, 24p/23.98p 10 bit

1280x720

YCbCr 4:4:4 30p/29.97p 10 bit

RGB 4:4:4 30p/29.97p 10 bit

3G-SDI Level B REC 709/2020 output follows input

1920x1080 YCbCr 4:2:2 60p/59.94p/50p 10 bit

1.5G-SDI REC 709/2020 output follows input

1920x1080 YCbCr 4:2:2 30P/29.97p, 25p, 24p/23.98p, 60i/59.94i/50i 10 bit

1280x720 YCbCr 4:2:2 60p/59.94p/50p10 bit

Apantac SDM-SDI-HDTV-UHD User manual

Apantac SDM-SDI-HDTV-UHD User manual

Apantac SDM-SDI-HDTV-UHD User manual

Related papers

Other documents