VADDIO 999-99950-800B Installation guide
- Category
- Camera accessories
- Type
- Installation guide
This manual is also suitable for
Installation Guide for the
ConferenceSHOT AV
Enterprise-Class Conferencing System
Document 411-0001-31 Rev G
November 2020
ii
Contents
Overview 1
What's in this Guide 1
Features 1
Unpacking the Conferencing System 2
A Quick Look at the System 3
Front of the Camera and Speaker 3
Back of the Camera 4
Back of the Speaker 4
Installation 5
Don’t Void Your Warranty! 5
Before You Install the Camera 5
Cabling Notes 6
Pre-Installation Functional Check 7
Status Indicator Light 8
About Ceiling-Mounted Cameras 8
About Echo Cancellation 8
Installing the Wall Mount 9
Basic Connections 9
Installing the Camera without the Speaker 11
Installing the Camera and Speaker 12
Powering Up the System 13
Operation, Storage, and Care 13
Next Steps 13
Compliance and Conformity Statements 14
FCC Part 15 Compliance 14
ICES-003 Compliance 14
European Compliance 15
Photo Credits 16
Index 17
1
Overview
This guide covers the ConferenceSHOT AV system – a camera and detachable speaker available in black
or white, available individually or in conference room bundles.
ConferenceSHOT AV Camera
nNorth America – 999-9995-000B (black), 999-9995-000W (white)
nEurope and UK – 999-9995-001B (black), 999-9995-001W (white)
nAustralia and New Zealand – 999-9995-009B (black), 999-9995-009W (white)
This camera is no longer available in silver/black.
ConferenceSHOT AV Speaker
nWorldwide – 999-9995-003 (black)
nWorldwide – 999-9995-003W (white)
The ConferenceSHOT AV camera and speaker are also available in bundles that include other audio
accessories.
Refer to legrandav.com for the latest information on ConferenceSHOT AV product bundles.
What's in this Guide
This guide covers:
nUnpacking the system
nTips for a successful installation
nInstructions for installing the camera mount
nInformation on connecting the system components
nInstructions for mounting the camera and speaker
nCamera power-on
Complete product information is available in the Complete Manual for the ConferenceSHOT AV
Enterprise-Class Conferencing System.
Note
If you are responsible for configuring the equipment after installing it, please use the Complete
Manual instead of this guide. The product's Complete Manual includes all the information in this guide,
plus information on system administration, operation, and troubleshooting.
Features
nIntegrated HD camera and audio system ideal for small to medium conference rooms
n10x optical zoom, horizontal field of view of 74° in super-wide mode
n2.14 Megapixel effective, native 1080p/60 full HD image sensor
nAudio inputs for two Vaddio microphones
nAudio output for optional matching speaker – or integrate into existing audio infrastructure
nSimultaneous uncompressed USB 3.0 and IP (H.264) video with full-duplex audio streaming
nSelectable IP stream resolution; USB stream resolution auto-negotiated with conferencing client
nPrecise pan and tilt movements at up to 90° per second
nUniversal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows®,
macOS®, and Linux operating systems, compatible with most UC conferencing applications
nIntegration-ready Telnet control
nEnterprise-class IT administrative capabilities with full web controls for remote management
nPresenter-friendly IR remote control
Unpacking the Conferencing System
Make sure you received all the items you expected. Here are the packing lists for the ConferenceSHOT AV
system.
Caution
Always support the camera's body when lifting or moving it. Lifting the camera by its head or mounting arm
will damage it.
ConferenceSHOT AV camera
North America: 999-9995-000 (black/silver) or 999-9995-000W (white)
Europe and UK:999-9995-001 (black/silver)or 999-9995-001W (white)
Australia and New Zealand: 999-9995-009 (black/silver)or 999-9995-009W (white)
nConferenceSHOT AV camera (silver/black or white)
nVaddio IR Remote Commander
nPoE+ mid-span power injector with AC cord set(s)
nCat-5e cable, 10 ft (3 m)
nUSB 3.0 cable, 6 ft (1.8 m)
n4-contact Phoenix-style connector
nThin Profile Wall Mount with mounting hardware
ConferenceSHOT AV speaker
All locales: 998-9995-003 (black) or 998-9995-003W (white)
nConferenceSHOT AV speaker
nRail mount kit (mounts to the camera or the camera mount)
nPower/audio cable, 6 in. (15 cm)
For bundle contents, refer to the ConferenceSHOT AV product pages on legrandav.com.
2
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
A Quick Look at the System
This section covers the physical features of the system.
Front of the Camera and Speaker
Camera and zoom lens – The ConferenceSHOT AV camera features a 10X optical zoom lens (11X in
Super-Wide mode).
IR sensor – Receives signals from the IR remote. Make sure there's nothing directly in front of the camera
base, and point the remote at the camera.
Status light – The multi-colored LED indicates the camera's current state. This light can be turned off in
the administrative web interface.
Note
By default, the camera's status indicator light is active during normal operation; however, it can be
configured to remain off when the camera is powered up. The camera may be sending video even if the light
is off.
Speaker – Far-end conference audio for small rooms. Available in some ConferenceSHOT AV bundles or
separately.
3
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Back of the Camera
nNetwork PoE+ – RJ-45 connector. Connect to the network and to power via the Power and Data Out
port of the mid-span PoE+ power injector. Provides power and network access for IP streaming and
camera control via web interface or Telnet.
nUSB 3.0 – USB type B connector. Connect to a computer for use with soft conferencing applications.
Provides uncompressed USB 3.0 stream.
nEasyMic ports – RJ-45 connectors. Connect Vaddio CeilingMIC, TableMIC, or other EasyMic-
compatible microphones.
nAudio output – Line level differential audio and 12 VDC power output to the optional amplified speaker
or other audio infrastructure.
Back of the Speaker
Use the provided speaker cable to connect the speaker to the camera's audio output.
4
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Installation
This section covers:
nSelecting the location for the camera
nVerifying that the camera is ready to install
nInstalling the mount
nConnection diagrams
nMounting the camera
And a required safety note here:
Note
PoE type networks connected to this equipment are for intra-building use only and should not be connected
to lines that run outside of the building in which this product is located.
Don’t Void Your Warranty!
Caution
Always support the camera's body when lifting or moving it. Lifting the camera by its head or mounting arm
will damage it.
Caution
This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate
protective enclosure. Do not allow it to come into contact with any liquid.
Caution
Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these
things happen, return it to Vaddio for safety and functional testing.
Before You Install the Camera
Things to keep in mind when deciding where to install the camera:
nConsider camera viewing angles, lighting conditions, line-of-sight obstructions, and in-wall obstructions
where the camera is to be mounted.
nEnsure that the camera body can move freely and will normally point away from the ceiling and lights.
The camera will not perform well if it is pointed toward a light source such as a light fixture or window.
nIf the remote will be used, ensure that nothing blocks the IR lens in the camera's base.
Prepare for a successful installation:
nBe sure you can identify all cables correctly.
nCheck Cat-5 cables for continuity.
nTalk to the network administrator. If installing the camera in a non-DHCP network (one that does not
automatically assign IP addresses), you will need to configure the camera with a static IP address as
directed by the network administrator.
5
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Cabling Notes
Caution
When building cables for Vaddio products, do not use pass-through RJ-45 connectors. If they
are crimped incorrectly, they can cause intermittent connections and degrade signal quality.
Incorrectly crimped pass-through connectors can also damage the connectors on the product,
which will void your warranty.
Intact – will make reliable contact
with cable connector
Damaged – Bent contact fingers
will NOT make reliable contact
with cable connector
Use Cat-5e or better cable. We recommend using high-quality connectors and a high-quality crimping tool.
We recommend shielded cabling if the cables will be coiled, run tightly with other cables, or routed near
sources of electromagnetic interference such as power lines or fluorescent light fixtures.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment
damage and will void the warranty.
Pro Tip
Label all cables at both ends.
6
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Pre-Installation Functional Check
If you're installing the camera where it's hard to reach, you may want to verify functionality before you
install it.
1. Connect the camera in its minimum functional configuration.
2. Connect power. The camera moves and the indicator light turns blue.
3. Open a media player such as VLCMedia Player and view the USB stream (If you use VLC Media
Player, this is the "Open Capture Device" option under Media.). The camera is available as a video
capture device; the device name is ConferenceSHOT AV.
The screen shots below show how you would access the USB stream using VLC Media Player. In this
example, the capture device is a ConferenceSHOT 10 camera. The steps are the same for the
ConferenceSHOT AV camera; only the video device name differs.
If the camera turns on and sends video, continue with the installation.
7
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Status Indicator Light
The light in the camera's base indicates its current state.
nBlue – Camera is active
nPurple – Standby mode or booting
nYellow – Firmware update is in progress
nBlinking blue – USB cable is disconnected (UC color scheme)
nBlinking red – Video mute is on (UC color scheme)
nBlinking yellow – Motor out of calibration
Caution
Do not remove power or reset the camera while the indicator is yellow, showing a firmware update in
progress. Interrupting a firmware update can make the camera unusable.
Note
By default, the camera's status indicator light is active during normal operation; however, it can be
configured to remain off when the camera is powered up. The camera may be sending video even if the light
is off.
About Ceiling-Mounted Cameras
If you use an inverted mount, set the camera's Image Flip mode ON for inverted operation. This orients the
video image correctly and sets the tilt motors to respond appropriately to tilt up and down commands from
the remote, web interface, and connected control devices. This control is available to the administrator on
the web interface's System page.
About Echo Cancellation
When a microphone picks up the audio from a speaker (far-end audio) during a conference, it sends the far-
end audio back to the participants at the far end, creating an echo. Acoustic echo cancellation prevents
this.
Here's how it works:
1. The speaker feeds the far-end audio into the room. This signal also goes to the audio processor as the
reference that needs to be canceled.
2. The audio processor inverts the signal and sends it to the microphone.
3. The sum of the audio that the microphone picks up from the speaker and the inverted signal is 0: The
echo is canceled.
With the audio from the speaker canceled out, the audio from the microphone includes only the sounds
originating at your end of the conference.
For the ConferenceSHOT AV system’s acoustic echo cancellation to work,
nThe line outputs or the powered speaker must be connected to provide the audio to be canceled, and
nThe microphone(s) must be connected, to route the audio from the speakers to the audio processor.
nIn the soft conferencing client, you must select the speakers and microphone connected to the camera
as the conference audio devices.
8
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Installing the Wall Mount
The camera is shipped with a wall mount. Other mounting options are available as well. Contact us if you
don’t have the camera mount you need.
You can install the camera wall mount to a 2-gang wall box or directly to the drywall.
nIf you mount it to drywall, use the wall anchors provided with the wall mount.
nIf you mount it to a wall box, use the cover plate screws supplied with the wall box.
This mount may be installed as shown, or flipped 180° so that the wall attachment is directly behind the
camera.
Basic Connections
Here is an example of how the camera might be set up in a medium-size conference room. (Shown:
ConferenceSHOT AV bundle – TableMIC 2.)In this setup, a PC uses a unified communications
conferencing application to manage the camera and connected microphones and speaker. When
connected in this way, the system provides echo cancellation.
9
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
The camera can also be connected without the speaker, using an HDMI audio embedder to include the far-
end audio in the HDMI output. (Shown: ConferenceSHOT AV bundle – TableMIC 1 without speaker.) This
allows you to use a display with integrated speakers. When connected this way, the system provides echo
cancellation.
This product is intended for installation and use only in environments where all PoE/PoE+ connections
originate within the building. It is not to be connected to lines that run outside the building where it is
installed.
10
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Installing the Camera without the Speaker
Caution
Before you start, be sure you can identify all cables correctly. Connecting a cable to the wrong port can
result in equipment damage.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment
damage and will void the warranty.
1. Route the cables through the opening in the mounting shelf.
2. Connect all required cables to the camera.
3. Secure the camera to the mounting shelf using the mounting screw (¼-20 x .375 in.) supplied with the
camera.
Note
If the camera is jostled or bumped while it is connected to power, it may require a pan-tilt reset.
11
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Installing the Camera and Speaker
1. If you are adding a speaker to a previously-installed ConferenceSHOT AV camera, remove its mounting
screw.
2. Place the camera on the mounting shelf if you have not already done so.
3. Secure the speaker rail, gasket, and camera to the mounting shelf with the 0.5 in. 1/4-20 flathead
screw.
4. Connect the speaker cable (power and line level signal) to the speaker.
5. Slide the speaker into place.
Note
If the camera is jostled or bumped while it is connected to power, it may require a pan-tilt reset.
12
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Powering Up the System
Connect camera power. The camera will initialize and move. This will take a few seconds. When an image
is available, the camera is ready to accept control information.
Operation, Storage, and Care
For smears or smudges on the product, wipe with a clean, soft cloth. Use a lens cleaner on the lens. Do not
use any abrasive chemicals.
Keep this device away from food and liquids.
Do not operate or store the device under any of the following conditions:
nTemperatures above 40° C (104° F) or below 0° C (32° F)
nHigh humidity, condensing or wet environments
nInclement weather
nSevere vibration
nIn a wind tunnel
nDry environments with an excess of static discharge
Do not attempt to take this product apart. There are no user-serviceable components inside.
Next Steps
The camera is now ready to configure and use. This information is available in the Complete Manual for
the ConferenceSHOT AV Enterprise-Class Conferencing System.
13
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Compliance and Conformity Statements
Compliance testing was performed to the following regulations:
FCC Part 15 (15.107, 15.109), Subpart B Class A
ICES-003, Issue 54: 2012 Class A
EMC Directive 2014/30/EU Class A
EN 55032: 2015 Class A
EN 55024: November 2010 Class A
IEC 60950-1:2005 (2nd Edition); Am 1: 2009 + Am 2: 2013 Safety
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 Safety
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15, Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference including interference that
may cause undesired operation of the device.
Changes or modifications not expressly approved by Vaddio can affect emission
compliance and could void the user’s authority to operate this equipment.
ICES-003 Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe A
préscrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications
du Canada.
14
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions
and Immunity and meets the requirements for a Class A digital device. In a domestic environment this
product may cause radio interference in which case the user may be required to take adequate measures.
Standard(s) To Which Conformity Is Declared:
EMC Directive 2014/30/EU
EN 55032: 2015 – Conducted and Radiated Emissions
EN 55024: November 2010 – Immunity
IEC 60950-1: 2005 (2nd Edition); Am 1: 2009 + Am 2: 2013 – Safety
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 – Safety
IEC 62368-1: 2014 (2nd Edition) – Safety
15
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Photo Credits
This guide may include some or all of these photos.
European Space Agency (ESA) astronaut Samantha Cristoforetti, a Flight Engineer with Expedition 42,
photographs the Earth through a window in the Cupola on the International Space Station
By NASA - https://blogs.nasa.gov/ISS_Science_Blog/2015/03/06/women-in-space-part-two-whats-
gender-got-to-do-with-it/, Public Domain, https://commons.wikimedia.org/w/index.php?curid=38834990
Carl Sagan, Bruce Murray, Louis Friedman (founders) and Harry Ashmore (advisor), on the occasion of
signing the papers formally incorporating The Planetary Society
By credit NASA JPL - JPL, Public Domain, https://commons.wikimedia.org/w/index.php?curid=1180927
Main Control Room / Mission Control Room of ESA at the European Space Operations Centre (ESOC) in
Darmstadt, Germany
By European Space Agency - ESOC flickr, Credit: ESA - Jürgen Mai, CC BY-SA 3.0-igo,
https://commons.wikimedia.org/w/index.php?curid=36743173
Expedition 42 on orbit crew portrait, International Space Station, Mar. 7, 2015 – Barry Wilmore
(Commander) Top, Upside down, to the right cosmonaut Elena Serova, & ESA European Space Agency
Samantha Cristoforetti. Bottom center US astronaut Terry Virts, top left cosmonauts Alexander
Samokutyaev and Anton Shkaplerov.
By NASA - https://www.flickr.com/photos/nasa2explore/16166230844/, Public Domain,
https://commons.wikimedia.org/w/index.php?curid=38931301
European Space Agency astronaut Luca Parmitano, Expedition 36 flight engineer, outside the International
Space Station
By NASA - http://spaceflight.nasa.gov/gallery/images/station/crew-36/html/iss036e016704.html, Public
Domain, https://commons.wikimedia.org/w/index.php?curid=27263573
Chris Cassidy, Luca Parmitano, and Karen Nyberg, ISS, 2013. Photo Credit: NASA
Nicolas Altobelli, Rosetta Scientist at ESA's European Space Astronomy Centre, Villanueva de la
Cañada, Madrid, Spain
By European Space Agency - Nicolas Altobelli talks to the media, CC BY-SA 3.0-igo,
https://commons.wikimedia.org/w/index.php?curid=36743144
Andrea Accomazzo, ESA Rosetta Spacecraft Operations Manager, providing a live update from the Main
Control Room at ESA's European Space Operations Centre, Darmstadt, Germany during the Rosetta
wake-up day.
By European Space Agency - Live update from the Main Control Room, CC BY-SA 3.0-igo,
https://commons.wikimedia.org/w/index.php?curid=36743150
Sleeping goose
By ladypine - Own work, CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=1695227
By Rick Dikeman - Image:Wayne Gretzky 1997.jpg, CC BY-SA 3.0,
https://commons.wikimedia.org/w/index.php?curid=945698
Photo AS11-40-5948, Aldrin assembles seismic experiment, by National Aeronautics and Space
Administration, courtesy of the NASA History Office and the NASA JSC Media Services Center
16
Installation Guide for the ConferenceSHOT AV Enterprise-Class Conferencing System
Index
A
AEC 8-10
anatomy of the system 3-4
audio 4
connections 4
B
behavior on power-up 13
C
cable connectors 4, 6
camera mount 5, 9
camera placement 5
capabilities 1
ceiling-mounted cameras 8
cleaning 13
color codes for status light 8
connecting the speaker 12
connection diagram 9-10
connectors 4
D
damage, preventing 2, 5-6
diagram, connection 9-10
E
echo cancellation 8-10
H
HDMI audio embedder 10
I
indicator light 8
meaning of colors 8
installation 9-12
basic connections 9-10
camera 11
camera mount 9
speaker 12
inverted installation 8
L
light, status indicator 8
meaning of colors 8
location of the camera 5
locations of connectors 4
M
MicPOD ports 4
microphones 9-10
mount 5, 9
mounting the camera 5, 11
mounting the speaker 12
O
operating environment 5, 13
P
packing list 2
part numbers 2
power connector 4
power on/power off 13
precautions 2, 5
for handling the camera 2
for operating the system 5
product capabilities 1
R
requirements 5
installation 5
mounting 5
RJ-45 connectors 6
S
shelf, camera mount 9
site requirements 5
speaker 9-10, 12
mounting and connecting 12
speaker port 4
status light 8
meanings of colors 8
storage environment 13
switch settings 8
T
temperature, operating and storage 13
V
visual parts identification 3
W
wall mount 9
warranty 5
17
Vaddio is a brand of Legrand AV Inc. · www.legrandav.com · Phone 800.572.2011 / +1.763.971.4400 · Fax
+1.763.971.4464 · Email av.vaddio.support@legrand.com
Visit us at www.legrandav.com for firmware updates, specifications, drawings, manuals, technical support
information, and more.
©2020 Legrand AV Inc.
Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for
identification purposes and are trademarks of their respective owners. All patents are protected under
existing designations. Other patents pending.
Commercial AV Brands Chief | Da-Lite | Middle Atlantic | Projecta | Vaddio
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
VADDIO 999-99950-800B Installation guide
- Category
- Camera accessories
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
VADDIO ConferenceSHOT AV Installation guide
-
VADDIO 999-9995-300 Installation guide
-
-
-
-
-
-
-
-
