ANI-C
ANI-C_V1.0.0_PI_2016-12_EN.fm 1
Subject to technical changes
FRIGOLINK
1 ANI-C
Control panel for FRIGOLINK ANIMUS platform
Fig. 1: Front view
1.1 Features
• Operating element for use in the FRIGOLINK ANIMUS platform for the Wurm G4 operating con-
cept
• User interface with Sticky Keys
• Graphic display with backlighting, plain text, 6 illuminated operating keys and 1 Info key
• Power supply via FRIGOLINK ANIMUS platform
NOTE
• You will find a detailed description of the display and control elements in the Operation chapter of
the product manual for your ANIMUS application.
ANI-C
2ANI-C_V1.0.0_PI_2016-12_EN.fm
Subject to technical changes
FRIGOLINK
1.2 Safety instructions
Writing conventions
Caution!
CAUTION!
• Avoid the described hazard: Otherwise minor or medium bodily injury or property damage will
result.
For your safety
For safe operation and to avoid personal injury and equipment damage through operating error, al-
ways read these instructions, become familiar with the device, and follow all safety instructions on the
product and in this document, as well as the safety guidelines of Wurm GmbH & Co. KG Elektronische
Systeme. Keep these instructions ready to hand for quick reference and pass them on with the device
if the product is sold. Wurm GmbH & Co. KG Elektronische Systeme accepts no liability in case of
improper use or use for other than the intended purpose.
Caution!
CAUTION! DAMAGE TO THE DEVICE IF HANDLED INCORRECTLY!
• Do not open the device!
• Do not repair the device yourself! If required, send it in for repair with an exact description of the
fault!
• Never expose the device to moisture, for example due to condensation or cleaning agents!
Software revision and validity of documentation
Any software versions not listed are special solutions for individual projects and are not described in detail in this
document. This document automatically ceases to be valid if a new technical description is issued.
Manufacturer: Wurm GmbH & Co. KG Elektronische Systeme, Morsbachtalstraße 30, D-42857 Remscheid
For further information, see our website at www.wurm.de
Target group This manual is intended for "service technician" personnel.
Intended use The ANI-C control panel is used to operate the FRIGOLINK ANIMUS
platform.
Software version Functional upgrade
V1.0.0 - 2016-03 Basis of documentation
V1.0.0 - 2016-12 Technical data adjusted
ANI-C
ANI-C_V1.0.0_PI_2016-12_EN.fm 3
Subject to technical changes
FRIGOLINK
1.3 Installing
Inserting the control panel
1. Use a screwdriver to lever the left front panel out of the housing and thus open the compartment
for the control panel.
2. (A) Set the left edge of the control panel in the compartment in the area to the left of the
contacts (a).
3. (B) Push the control panel to the left. When doing so, press the control panel against the bottom
of the compartment.
4. (C) Push the control panel into the compartment till it engages in the catch (b).
Fig. 2: Inserting the control panel
NOTE!
• Place the control panel to the left of the contacts in the compartment, otherwise they may be
damaged.
• Check that the control panel is placed flush left and is therefore positioned correctly on the con-
tacts!
• A wrongly inserted control panel protrudes to the left although it has engaged in the catch. In this
case, the control panel can be taken out only by the left edge.
Taking out the control panel
1. Push the catch (b) to the left until the control panel is released.
2. Lift the control panel by the right edge out of the compartment.
A
B
C
ANI-C
4ANI-C_V1.0.0_PI_2016-12_EN.fm
Subject to technical changes
FRIGOLINK
1.4 Technical data
Power supply 5V from FRIGOLINK ANIMUS platform or USB connection
Display Graphic display
Dimensions (WxHxD) 153.5 x 41.9 x 18.6mm
Housing Plastic
Fastening Lock in place in the bracket of the FRIGOLINK ANIMUS plat-
form
Ambient temperature Operation: 0...+55°C, storage: -10...+70°C
Weight About 90g
CE conformity EU conformity as defined in
- 2014/30/EU (EMC Directive)
RoHS II
Valid from Version 1.0.0
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
WURM ANI-2F1 Product information
-
WURM ANI-1F1 Product information
-
WURM ANI-1F1 Product information
-
WURM ANI-1F3 Product information
-
WURM ANI-1F1 Product information
-
WURM ANI-1F3 Product information
-
WURM ASV101 Product information
-
WURM FKR002B Product information
-
WURM CAN-AP Product information
-
WURM HCO2 Product information
