RAMPAGE PRODUCTS 901007 Installation guide

Installation Instructions

Windshield Channel Header (No Drill), Black,

07-08 Jeep Wrangler 2dr and 4dr

Hardware List

A) 1-Windshield Retainer

B) 2- Brackets

)

2- Knobs

INSTALLATION INSTRUCTIONS

1. Remove any hard or soft top currently on your Jeep.

2. Install the brief onto the header channel using the snaps as shown in the illustration. (fig 1)

3. Place the header channel with the top installed above the windshield on the gasket.

fig. 1 fig. 2

4. Insert the tab of the header channel into the footman loop on the vehicles windshield as shown.

(Fig. 2)

5. Place the metal bracket in place on under the header channel as shown. (fig 3).

6. Insert the threaded knob into the metal bracket and tighten. (fig 4) Repeat for other side.

fig. 3 fig. 4

Rampage Products

9225 Stellar Court Unit C, CORONA, CA 92883-4919, U.S.A.

Phone: (951) 277-4949 Fax: (951) 277-2295

Web: www.rampageproducts.net

Part 901007

Made in China

Download PDF