•Fittingmaterial: Steel / Plastic with Diffused PVC lightweight aluminium alloy & plastic cover.
•RecomendedLamps:
C92: Excluded 2 x G13 T8 Maximum 18W Flourescent Tubes
C100: Including 2 x G13 T8 Maximum 36W Flourescent Tubes
C101: Including 2 x G13 T8 Maximum 58W Flourescent Tubes
•Voltage: 220V - 240V ~ 50Hz
•Protectionagainstelectricshock: Class 1. Requires earthing.
•IPRating: IP20. Dust Protected. Protected against solid foreign objects of 1.0mm Ø and greater.
Protected against splashing water.
• Commercial / domestic use.
• Not suitable for outdoor use.
•MaximumAmbienttemperaturerange: 20ºC - 40ºC.
•Dimensions:
C92: (L)635mm x (W)135mm x (H)50mm
C100: (L)1246mm x (W)150mm x (H)50mm
C101: (L)1540mm x (W)150mm x (H)50mm
•Sparediffuser:
C92: Code X592
C100: Code X593
C101: Code X594
•Spareballast:
C92: Code CO88
C100: Code CO89
C101: N/A
•Switchthepowersupplyoffbeforecommencingwiththeinstallation.
•Ensurethattheminimumdistancefromlighttonearestsubjectisfollowedasmarkedonthelight
tting,pleaseseediagrambelow.
•Whendrillingisrequiredforxingtheluminairetotherequiredsurfacepleaseensurethatno
pipes or cables are within the drilling area.
•Connectthewiresasfollows.Directconnectiontohousewiring(Productsuppliedwith
connector block).
•Iftheheatsleeveissuppliedwithyourluminaire,pleaseconnecttheincominglive,neutraland
earth supply wires.
•Connecttheearth(green/yellow)supplywiringtotheearthterminal“E”.
•Connectthelive(brown/red)supplywiringtotheconnectorblockmarked“L”.
•Connecttheneutral(blue/black)supplywiringtotheconnectorblockmarked“N”.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
•Ensurethelampsareseatedcorrectly.Locateandtwist
•Reconnectpowersupply.
C92/C100/C101-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,IE.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalrating.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/orsurfaces.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis
product whilst it is connected to the electricity supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Coastalhumiditymayeffectthelongevityoftheluminaire.
•Outdoorluminairesmustbecleanedtopreventrustoccurring.