Dacota Gaming NINTENDO SWITCH PRO KONTROLLERGREP User manual

Brand
Dacota Gaming
Model
NINTENDO SWITCH PRO KONTROLLERGREP
Type
User manual
Product specifications:
1
Model: DGNSPROGRIP
Charging InputDC 15V/1.5A
Working Temperature: -20~40℃
Storage Temperature: -40~70℃
Size: 125x65x300mm
Product Diagram:
2
Controller Upgrade Instruction:
3
1. After the N-S game console is removed, please set
the “controller upgrade connection switch” to the “on”
state with the iron needle.
2. Then press and hold the “left 3D joystick” of the
controller; plug the Type-C USB cable in the controller
power interface and connect to the computer USB
interface; release the “left 3D joystick” of the controller
and open the upgrade package to upgrade.
3. After the upgrade is completed,
please set the “controller upgrade connection switch”
to the “off” status.
6
TURBO Function Settings:
3
1. Semi-automatic TURBO function setting: press TURBO
key and then set it as the TURBO function key as
required, then you can complete the settings
successfully.
2. Full-automatic TURBO function setting: press TURBO
key and then press the key which has been set up with
the semi-automatic TURBO function.
Note: Only one key can be set up for full-automatic
TURBO function; multiple keys cannot be set up
simultaneously.
3. Keys available for TURBO function settings: A key, B key,
X key, Y key, + key, - key, L key, R key, ZL key, ZR key,
“cross” key (up, down, left and right), L3 key (left 3D
joystick press key) and R3 (right 3D joystick press key).
4
Instruction for Installation, Connection and Use
3
1. Before installation, please start up the game console and
enter the settings menu, find out the “controller and
inductor” item and set the “Pro controller wired
connection” to “On”.
2. After the N-S game console is directly plugged into
the controller, please press A key of the controller for
control; then find out the “controller and inductor” item
in the settings menu, and calibrate the "joystick" and
"gyroscope inductor" before using it.
Notes: Do not touch the 3D joystick (or other keys) when
installing and plugging in the console so as to prevent
automatic deviation calibration.
In case of deviation in 3D joystick, please pull out the
console for reconnection or calibrate in the “joystick
calibration” item in the settings menu of the N-S console.
User Manual
Nintendo Switch Controller Grip
Left 3D joystick
Direction key
- key
Print Screen key
Controller upgrade
connection switch TYPE-C charging
interface
+ key Y key X key
A key
B key
Right 3D joystick
HOME key
T key
R key
ZR key
Console connector
L key
ZL key
Charging Instruction:
3
It supports game playing while charging the N-S
game console; the N-S original power adapter or
standard 15V PD protocol power adapter can be used
for charging. N-S game controller screen will display
the charging symbol after being plugged in the power
supply.
Note: There is no battery in the controller. Charging means
to charge the N-S game console.
5
EN-1 EN-2 EN-3 EN-4
4. Clear TURBO function keys that have been set:
Clear TURBO function of single key: press TURBO key
+ key set up with TURBO function for quick clear.
Clear TURBO function of all keys: long press the
TURBO key for 5 seconds for clear-all.
  • Page 1 1

Dacota Gaming NINTENDO SWITCH PRO KONTROLLERGREP User manual

Brand
Dacota Gaming
Model
NINTENDO SWITCH PRO KONTROLLERGREP
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents