Rival 4x4 2D.2730.1 Installation guide

Brand: Rival 4x4

Model: 2D.2730.1

Category: Car kits

Type: Installation guide

PARTS LISTING

  о

в н 

с  о

 о

 



 -

































Date: 16-June-2021 .rival4x4.com

к



м

RIVAL

о



о

N

о



1



< Page 4 of 1 З >

INSTALLATION PROCEDURE

12. Install tailgate table (pos. 1) on left and right brackets (pos. 6,7) using spacer 0,20”(5mm) (pos. N)

between table and brackets, and x it using screws M6x25 (pos. D), Nylon plastic washers 6 (pos. H)

and nuts M6 (pos. G), (g. 19,20).

* Tighten all the hardware and make sure it allows table to be easily opened and closed.

Fig.19 Fig.20

10. Install door plastic cover on the rear door.

Install spacer 1.02”(26mm) and spacer

1.50”(38mm) (pos. O, P), (g. 17).

11. Install left and right bracket (pos. 6,7) and x

it using screw M6x40 (pos. C), M6x50 (pos. B)and

M6x60 (pos. A), washer 6 (pos. I), Spring Washer

6 (pos. K), (g. 18).

Fig.17 Fig.18

1.02”(26mm)

1.50”(38mm) М6x60

www.rival4x4.com

Date: 16-June-2021

Installation manual 2D.2730.1

< Page 9 of 13 >

М6x50

М6x40

INSTALLION PROCEDURE RIL

Fig.21 Fig.22

13. lnstall swing up brackets (pos. 2) one side оп brackets

f

rom the outside (pos. 6,7) and one side оп

the tаЫе

f

rom the inside (pos. 1 ), (g. 21) using screws Мбх20 (pos. Е), Nylon plastic washers 6 (pos.

Н) and nuts Мб (pos. G), (g. 22).

*Tighten all the hardware and make sure it allows tаЫе to Ье easily opened and closed.

Date: 16-June-2021 .rival4x4.com



< Page 1 О of 1 З >

1
2
3
4
5
6
7
8
9
10
11
12
13

Rival 4x4 2D.2730.1 Installation guide

Brand: Rival 4x4

Model: 2D.2730.1

Category: Car kits

Type: Installation guide

Other documents