Econoco PSBB60 Installation guide

Brand
Econoco
Model
PSBB60
Type
Installation guide

This manual is also suitable for

HANGBAR 1X
UPRIGHT 2X
CROSSBAR 1X
BASE FEET 2X
CASTERS 4X
WRENCH 1X
DETAIL L
SCALE 1 : 4
LOCK WASHER 2X
BUTTON HEAD
SCREW 2X
ALLEN KEY 1X
ASSEMBLY
INSTRUCTIONS FOR:
PSBB, PSBBWTE, PSBB60
SHEET 1 OF 3
PSBB, PSBBWTE, PSBB60
UPRIGHT
BASE FEET
CROSS BAR
FOOT FITTING
BY HAND, SCREW BOTH UPRIGHTS INTO HANGBAR.
•
MAKE AS TIGHT AS POSSIBLE
BY HAND, SCREW BOTH BASE FEET ONTO UPRIGHTS AS
•
TIGHT AS POSSIBLE AND ALIGN SO FOOT FITTINGS ARE
FACING EACH OTHER.
NOTE:
THE BASE FEET MAY NEED TO BE PARTIALLY
•
UNSCREWED TO ACCOMPLISH THIS.
TURN OUT THE BASE FEET ENOUGH SO THE CROSS
•
BAR CAN BE INSERTED INTO THE FOOT FITTING.
SHEET 2 OF 3
PSBB, PSBBWTE, PSBB60
31
2
STEP 4A
STEP 4B
DETAIL M
NON LOCKING
NON LOCKING
LOCKING
LOCKING
STEP 4A
ROTATE THE BASE FOOT AND CROSSBAR
•
BACK TO CENTER AND INSERT THE CROSS
BAR INTO THE OTHER FOOT FITTING.
STEP 4B
SECURE THE CROSS BAR WITH THE BUTTON
•
HEAD SCREWS AND LOCK WASHERS AS
SHOWN WITH THE INCLUDED ALLEN KEY.
INSTALL CASTERS USING THE INCLUDED
•
WRENCH.
SHEET 3 OF 3
PSBB, PSBBWTE, PSBB60
54
  • Page 1 1
  • Page 2 2
  • Page 3 3

Econoco PSBB60 Installation guide

Brand
Econoco
Model
PSBB60
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents