HANGBAR 1X
UPRIGHT 2X
CROSSBAR 1X
BASE FEET 2X
CASTERS 4X
WRENCH 1X
DETAIL L
SCALE 1 : 4
LOCK WASHER 2X
BUTTON HEAD
SCREW 2X
ALLEN KEY 1X
ASSEMBLY
INSTRUCTIONS FOR:
PSBB, PSBBWTE, PSBB60
SHEET 1 OF 3
PSBB, PSBBWTE, PSBB60
UPRIGHT
BASE FEET
CROSS BAR
FOOT FITTING
BY HAND, SCREW BOTH UPRIGHTS INTO HANGBAR.
•
MAKE AS TIGHT AS POSSIBLE
BY HAND, SCREW BOTH BASE FEET ONTO UPRIGHTS AS
•
TIGHT AS POSSIBLE AND ALIGN SO FOOT FITTINGS ARE
FACING EACH OTHER.
NOTE:
THE BASE FEET MAY NEED TO BE PARTIALLY
•
UNSCREWED TO ACCOMPLISH THIS.
TURN OUT THE BASE FEET ENOUGH SO THE CROSS
•
BAR CAN BE INSERTED INTO THE FOOT FITTING.
SHEET 2 OF 3
PSBB, PSBBWTE, PSBB60
31
2
STEP 4A
STEP 4B
DETAIL M
NON LOCKING
NON LOCKING
LOCKING
LOCKING
STEP 4A
ROTATE THE BASE FOOT AND CROSSBAR
•
BACK TO CENTER AND INSERT THE CROSS
BAR INTO THE OTHER FOOT FITTING.
STEP 4B
SECURE THE CROSS BAR WITH THE BUTTON
•
HEAD SCREWS AND LOCK WASHERS AS
SHOWN WITH THE INCLUDED ALLEN KEY.
INSTALL CASTERS USING THE INCLUDED
•
WRENCH.
SHEET 3 OF 3
PSBB, PSBBWTE, PSBB60
54
-
1
-
2
-
3
Econoco PSBB60ADJWH Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Displays2go PPLNRCKCRV Operating instructions
-
Pulsar PSBB2512 Operating instructions
-
-
Honey-Can-Do GAR-01123 Installation guide
-
Comtech EF Data LCS-4 Operating instructions
-
-
-
-
-