QUICK START GUIDE
1. Make sure your Vacuum is powered on, using the power switch located on the side of the device. If battery power is
low (LED panel will display “FIND”), make sure your charging station is properly connected, and your vacuum will
automatically locate the station to charge. Alternatively, you can charge your device manually, by connecting the charger
directly into the charge port on the vacuum (located next to the power switch). Device takes about 6 hours to fully
charge.
.
2. Install 2 AAA batteries into the provided remote, to begin cleaning immediately.
3. You can also follow the steps below to sync the your Smart Vac with your Smartphone:
a. Open the Apple Store or Google Play Store, and search for “IView ihome”
b. Download and install the Iview iHome App.
c. Open the app and register an account using you email or cell phone number.
d. On your Vacuum, Press and hold the Auto-Clean button until the WI-FI icon flashes rapidly.
e. Back to your Smartphone, select the + icon, located at the top-right of the screen. Scroll down the list and select
“Robot Vacuum.” Follow the instructions provided by the app. You will be prompted to enter your Wi-Fi password. Enter
your password and select “Connect.” Device will begin connecting.
NOTE: If device fails to connect, repeat from Step d.
POWER
/