Benefits to the User
• NEW formula is more soluble and more
effective in converting dissolved iron
and/or manganese to insoluble oxides
which can easily be removed through
filtration.
• Composed of National Sanitation
Foundation (NSF) certified material to
meet Standard 60: Drinking Water
Treatment Chemicals
• Maintains maximum performance of
greensand iron filter
• The solubility of Potassium Permanganate is
temperature dependent and adjustments should
be made for varying ambient temperature ranges.
• Store in a cool, dry, area in closed containers.
Segregate from acids, peroxides, and all
combustible, organic, or easily oxidizable
materials. Read relevant MSDS before handling
this product.
• Stains can be removed from the skin with a
simple mixture of 30 parts 3% USP hydrogen
peroxide and 40 parts 5% food-grade white
vinegar with 30 parts of water.
Part # Size Qty.
PF65N 5 lb. 6
Maintains performance of greensand iron filters.
Potassium Permanganate is a strong oxidizing agent that converts dissolved iron
and/or manganese to insoluble oxides which can easily be removed through
filtration. Potassium Permanganate regenerates and oxidizes greensand iron
filter media, restoring the exchange capacity of the unit.
Technical Information
Professional Water Treatment Solutions
PPP1219
DANGER: CAUSES BURNS TO EYES & SKIN. HARMFUL IF SWALLOWED. KEEP OUT OF REACH OF CHILDREN. Do not mix with other chemicals. Contains Potassium
Permanganate and Sodium Sulfate. Avoid contact with eyes, skin and mucous membranes. Use with adequate ventilation. Do not inhale dust. Do not ingest. Wear chemical-resistant gloves and eye protection
when using this product. Wash thoroughly after handling. FIRST AID: If in eyes: Flush thoroughly with water for 15 minutes, removing any contact lenses, and get immediate medical attention. If on skin: Flush
thoroughly with water for 15 minutes and get medical attention. If swallowed: Do not induce vomiting. Drink two or three glasses of water and get immediate medical attention. Call a poison control center or
doctor immediately for treatment advice (1-800-222-1222). Storage/Disposal: Store in original container and reseal after each use. Store container away from heat, flames and combustible materials. Do not
reuse container. Packaging is recyclable.
REGENERATION - Normal procedure for regenerating an iron filter is
usually specified by the filter manufacturer or supplier and depends on
water conditions. There are many types, designs and methods of
introducing Potassium Permanganate to the filter. A normal method is to
make a solution and apply automatically or manually to the filter at regular
intervals. If unsure, consult owner’s manual. NOTE: Do not use in a
water softener. DOSAGE For each cubic foot of filter media, 1/4 cup -
1/2 cup dry Potassium Permanganate is required. It may be added directly
to the filter or mixed with water and added as a solution. At 50º F (10º C)
1/2 cup of Potassium Permanganate can dissolve in 1 gal. of water. At
room temperature or 72º F (22º C) 1 cup can dissolve in 1 gal. of water.
GENERAL INFORMATION Stains can be removed from the skin with a
diluted solution of sodium bisulfite or lemon juice.
DIRECTIONS:
POTASSIUM
PERMANGANATE
IRON FILTER REGENERANT
Questions? Call 1-888-476-6688
Mon.–Fri. 8 am–5 pm EST
www.summitbrands.com