ClosetMaid 17007 Installation guide

Selectives Combo Kits

Installation Tips

Basic Kit

17007

08/15

Tools you will need for assembly:

.50 in.

.25 in.

Getting Started

General Tips

• Pleaserefertotheinstructionsheetprovidedintheproductpackageforthespecicsonrequired

& recommended tools for the assembly of the products.

• Take an inventory of the parts for the products purchased to insure you have everything you need

for the installation.

• Pre-plan the placement of the towers.

Parts List

5 - Selectives

48 in. Top Shelf

1 - Selectives

16 in. Starter Kit

• Assemble and build your towers.

• Placeyourtowers,makingsuretoafxthemtothewallasdirected.

• Measure the length that the rods will need to be for each side. Make sure the span between units

orunitandwallisnotgreaterthan48in.Thetopshelvesandclosetrodstamaximumspaceof

48 in.

• Theexpandableclosetrodsare30in.to48in.long.Ifthelengthisshorterthan30in.therodwill

need to be cut.

• Installtheclosetrodsandtopshelves.

• Assemble and install any drawers into the tower unit (sold separately).

5 - Selectives

Shelf Support Kit

Download PDF