Carriage Bolt
M6-10 x 23mm
Socket Bolt
Fender Washer
Plastic Cap
Tabletop
Nylon Bushing
Trigroove NutTrigroove Nut
M5x16mm Security Screw
11mm Washer
AP2632 Plate
Glass Shelf
Pedestal Assembly
If this plate comes
with your assembly,
discard it in Step. 1.
REVISION
DATE
DRAWN BY
TITLE:
PROPERTY OF LUCASEY MANUFACTURING CORPORATION * ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED
FILE NAME
COMMENTS
Before mounting the adapter plate to
the glass shelf with pedestal:
a. Do not attach the flat screen.
b. Using the square holes in the plate
as a template, drill 1/4" holes through
the furniture top.
AP2632_INSrevC
AP2632 Assembly Instructions
8/21/07
C
A.B.K.
1.
2.
3.
4.
5.
6.
Remove the M6 socket bolts from the bottom of
the glass shelf.
Note: this releases the pedestal from the shelf.
If the nylon bushings pulled free, place them
back into the glass plate.
Insert the two carriage bolts through the square
holes in the AP2632 plate. The dimples must
face up.
Place the AP2632 plate against the bottom
of the glass shelf and screw the M6 socketbolts
through the shelf and into the pedestal.
Stick the six (6) nylon feet on the original
pads on the bottom of the glass shelf.
Place the assembly on the mounting surface
with the carriage bolts in the pre-drilled holes.
Secure the carriage bolts to the table with a
fender washer andtrigroove nut. Cover the end
of the bolt with a plastic cap.
Added OEM plate
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Postal Products Unlimited N1031044 User guide
-
Haima S5 User manual
-
-
Bull Colt- Stallion- And Baron Gas Bbq Operating instructions
-
Holland BH421-AG3 Owner's manual
-
-
-
Lifetime 60005 Owner's manual
-
-
TEC PATIO II Owner's manual