Page is loading ...
Customers can now purchase the popular HandPunch
4000 (HP-4000-S) with an integrated handheld laser
barcode scanner facilitating shop floor data collection.
HP-4000 with Hand Held Barcode Scanner Product Description
•
The HP-4000-S is an extension of the popular HP-4000 that
includes an integrated handheld barcode scanner. In addition
to being a fully functional and feature rich time and attendance
terminal, the HP-4000-S now provides the additional versatility
of a job costing and job-tracking device.
•
The HP-4000-S has added circuitry to enable the use of a
scanner. Scanners cannot be added to a standard HP-4000.
•
The HP-4000-S cannot be purchased without a scanner.
HH-LAST Hand Held Barcode Scanner Option for HP-4000-S
The laser scanner plugs directly into the HP-4000-S drawing
power from the HandReader, so there are no extra wires or
power supply. Handheld Scanners will be configured to read
code 3 of 9 (code 39) and interleaved 2 of 5 (l - 2 of 5) formats.
Up to 10 digits are used for the ID number and up to 8 digits
for data entry values (accessed through function key menus).
HandPunch
®
4000-S
HP-4000S
HandPunch
®
is a registered trademark of Schlage Recognition Systems
Specifications subject to change. Please check with your system vendor for details.
© 2008 Ingersoll-Rand Company Pub No. IR-TA-1587 Rev 2/08
408-341-4100 • www.biometrics.schlage.com
Metrlogic
®
MS9540 Voyager CG
•
Lightweight hand held bar code scanner
•
Equipped with trigger for accurate reads
(can be deactivated)
•
Decodes common 1D formats including Code39
and Interleaved 2 of 5
•
High-visibility laser diode (650 nm +/- 10) allows easy
placement of line on bar code
•
Rapid single line scan speed of 72 +/- 2 lines per second
•
Bright green/red LED for easy read verification
•
User-replaceable detachable cables
•
Durable - shock resistant to 5’
•
Not field installable
Metrlogic
®
MS9540 Voyager CG
/
