Vita-Mix Inc. Portion Blending System Installation guide

Type
Installation guide
Due to the weight of your Portion Blending System (PBS) do not lift or carry the
PBS alone. Obtain the assistance of at least one other person when moving the PBS.
1. Turn the box containing the PBS on its side and open both the top and bottom of the box.
2. Slowly push from the top of the open box until the styrofoam extends out the bottom of the box
about an inch past the box flaps.
3. With the help of one other person carefully tilt the box upright.
4. With the PBS upright, slide the box up and off of the machine. Remove the styrofoam packing
and the contents from inside the Ice Bin of the PBS.
5. When lifting the machine onto the counter, position two people on opposite sides of the PBS
and lift the machine from the bottom.
6. Read the Owners Manual for further instructions on setting up and operating your PBS.
INSTRUCTIONS FOR UNPACKING YOUR
PORTION BLENDING SYSTEM
®
Due to the weight of your Portion Blending System (PBS) do not lift or carry the
PBS alone. Obtain the assistance of at least one other person when moving the PBS.
1. Turn the box containing the PBS on its side and open both the top and bottom of the box.
2. Slowly push from the top of the open box until the styrofoam extends out the bottom of the box
about an inch past the box flaps.
3. With the help of one other person carefully tilt the box upright.
4. With the PBS upright, slide the box up and off of the machine. Remove the styrofoam packing
and the contents from inside the Ice Bin of the PBS.
5. When lifting the machine onto the counter, position two people on opposite sides of the PBS
and lift the machine from the bottom.
6. Read the Owners Manual for further instructions on setting up and operating your PBS.
INSTRUCTIONS FOR UNPACKING YOUR
PORTION BLENDING SYSTEM
®
XPB004 07/02
XPB004 07/02
  • Page 1 1

Vita-Mix Inc. Portion Blending System Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI