American Standard 2722W.102 User manual

Type
User manual
H103
© 2008 AS America Inc.
Revised 10/08
To Be Specied - Required:
Color: (Arctic only)
Bath Filler*: (specify nish)
Drain: 1640.305 (specify nish)
To Be Specied - Optional:
Bath Walls: 5030W.LBW
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
ROPE TWIST™ BATHING POOL
with INTEGRAL APRON
❏ 2722W.102 Bathing Pool, Right Hand Outlet
❏ 2722W.202 Bathing Pool, Left Hand Outlet
Product Features:
• Stylish rope-twist design feature
Acrylic with berglass reinforcement
Integral apron design
Integral three-sided, tiling/water retention ange
Generous back rest
End drain outlet
• Design coordinated to match Rope Twist
bath walls (specify walls separately)
• 17" oor to deck tub depth
• High gloss surface nish
• Limited Lifetime warranty
Nominal Dimensions:
60" x 32" x 17"
(1524 x 813 x 432mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
ROPE TWIST™
BATHING POOL
HIGH GLOSS ACRYLIC
Rope Twist Bath Walls with Rope Twist Bathing Pool Shown.
Specify Walls Separately.
H104
© 2008 AS America Inc.
ROPE TWIST™
BATHING POOL
HIGH GLOSS ACRYLIC
60 x 32 x 17 In.
(1524 x 813 x 432mm)
60 Lbs. (27 Kg)
393 Lbs.(179 Kg)
40 Gal. (151 L)
22 x 44 In. (559 x 1118mm)
25.5 X 53 In.(648 x 1346mm)
10 In. (254mm)
29 Lbs./Sq.Ft. (195 Kgs/Sq.m)
15.3
27
GENERAL SPECIFICATIONS FOR 2722W BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
16-3/4"
(425mm)
2"
(51mm)
4-5/8"
(117mm)
ROUGH
FLOOR
17"
(432mm)
1"
(25mm)
FINISHED
WALL
SEE
NOTE
3-1/2"
(89mm)
32"
(813mm)
60"
(1524mm)
3/4"
(19mm)
70mm
(2-3/4)
7-3/4"
(197mm)
FINISHED
WALL
C/L OF
DRAIN
229mm x 305mm
(9 x 12)
FLOOR
CUTOUT
15-1/8"
(385mm)
4-1/2"
(114mm)
25mm
(1)
BATH SUPPORT
MATERIAL
TOP OF
DECK
NOTES:
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2722W.202).
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and
A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Revised 3/08
  • Page 1 1
  • Page 2 2

American Standard 2722W.102 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI