Features
•
Pressure-balancing diaphragm technology maintains outlet
temperature within +/-3 degrees Fahrenheit during water
pressure fluctuations.
•
Provides temperature regulation and automatic anti-scald
protection.
•
Single handle controls both on/off activation and temperature
settings.
•
Includes faceplate with ADA-compliant metal lever handle.
•
Includes single-function 1.75 gpm (6.6 lpm) showerhead with
Katalyst
®
air-induction technology.
•
Showerhead features MasterClean
™
sprayface for easy
cleaning.
•
Includes shower arm and flange.
•
Coordinates with Refinia
®
faucets and accessories.
Material
•
Premium material construction with metal handle ensures
reliability and durability.
Codes/Standards
•
KOHLER finishes resist corrosion and tarnishing.
ASME A112.18.1/CSA B125.1
Installation
DOE - Energy Policy Act 1992
EPA WaterSense
®
•
Trim set requires valve to complete installation (sold separately).
California Energy Commission (CEC)
Required Products/Accessories
K-304/K-P304 Series Rite-Temp® Valves
KOHLER
®
Faucet Lifetime Limited
Warranty
or
K-8304/K-P8304 Series Rite-Temp® Valve & Cartridge Kits
See website for detailed warranty information.
or
K-8300/K-P8300 Series Rite-Temp® Valve Body Rough-ins
K-8305/K-P8305 Series Rite-Temp® Cartridges
Available Colors/Finishes
or
K-2971-KS 3/4" Pressure-balancing Valve
Color tiles intended for reference only.
Adapters, Rough-in and Extension Kits
DescriptionCodeColor
Range: 3-1/2" (89 mm) - 4-1/4" (108 mm)1073881
Polished ChromeCP
Optional Products/Accessories
K-10350 Deep Rough-In Kit For K-8305 Cartridges
K-10351 Test Cap For K-8300 Series Valve Bodies
Vibrant® Brushed NickelBN
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-19-2020 06:13 - US/CA
Refinia
®
Rite-Temp
®
1.75 gpm shower trim
K-TS5320-4G
Ø 6-3/8"
(162 mm)
5-1/16"
(129 mm)
7-3/8" (187 mm)
Typical
Ø 3-1/2"
(89 mm)
3-9/16"
(90 mm)
1/2"
NPT
4"
(102 mm)
K-2971-KS,
K-304 Valves
K-8300 Valve
Series
Finished Wall
*If 3-1/2" (89 mm) to
4-1/4" (108 mm) use
deep roughing-in kit.
Notes
Technical Information
For use with automatic compensating valves rated
at 1.6 gal/min (6.1 l/min) or less.
All product dimensions are nominal.
NoDrain included:
Install this product according to the installation
instructions.
Showerhead/Body Spray:
1.75 gal/min (6.6 l/min)Rated maximum flow:
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout.
80 psi (5.5 bar)Pressure:
NOTICE: Risk of product damage. Long screws,
for installing trim, can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-19-2020 06:13 - US/CA
Refinia
®
Rite-Temp
®
1.75 gpm shower trim
K-TS5320-4G
/
