2. Kohler
  3. K-8304-PX-NA
K-8304-PX-NA

Kohler K-8304-PX-NA Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the Kohler K-8304-PX-NA Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum flow rate of the Kohler K-8304-PX-NA valve?
    What type of material is the valve body made of?
    What kind of cartridge does this valve use?
    What is the temperature range that this valve can handle?
    Does this valve require a valve trim to complete installation?
Features
•
Includes valve body, pressure balance cartridge, rough-in guide
and mud guard
•
1/2" PEX Crimp (F1807 style) inlets
•
1/2" Universal NPT & direct sweat outlets
•
5.0 gpm (18.9 l/min) maximum flow rate at 45 psi
•
Single lever design cycles from off through cold to hot
•
Provides temperature regulation and automatic anti-scald
protection
•
One piece cartridge design simplifies installation and
maintenance
•
Adjustable high temperature limit stop to control maximum water
temperature
•
Requires valve trim to complete installation (sold separately).
Codes/Standards
Material
ASME A112.18.1/CSA B125.1
ASSE 1016/ASME A112.1016/CSA B125.16
•
Forged De-zincification Resistant Brass body provides long
term reliability and resistance to aggressive water conditions
KOHLER
®
Faucet Lifetime Limited
Warranty
Technology
•
Pressure-balancing diaphragm technology maintains outlet
temperature within +/- 3 degrees Fahrenheit during water
pressure fluctuations
See website for detailed warranty information.
Installation
•
Designed for use in standard, back to back and thin wall
installations
•
Valve body features integral mounting locations and symmetrical
valve inlets to simplify installation
•
Cartridge is reversible for installations where hot and cold
supplies are reversed.
•
Rough-in guide designed for both standard and thin wall
installations
•
Installed valve rough-in can be flushed and pressure tested to
150psi max (air or water) without cartridge, using K-10351 Test
Cap
Optional Accessories
K-10350 Deep Rough-In Kit For K-8305 Cartridges
K-10351 Test Cap For K-8300 Series Valve Bodies
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-27-2018 08:18
Rite-Temp
®
Valve Body & Cartridge Kit Complete
K-8304-PX
Cut Line
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
Shower Valve:
Avoid cross-flow conditions. Do not install shut-off
device on either valve outlet.
20 psi (1.4 bar)Min. pressure IN:
Machined-brassValve body:
Cap the shower outlet if deck-mount spout,
diverter, or handshower is connected to the spout
outlet.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and wall-mount spout.
For finished walls greater than 3/4" (19 mm) and
less than 1-1/2" (38 mm), install support(s) 2" (51
mm) from the stud face.
For finished walls greater than 1-1/2" (38 mm),
install support(s) 3" (76 mm) from the face of the
finished wall.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
8-27-2018 08:18
Rite-Temp
®
Valve Body & Cartridge Kit Complete
K-8304-PX
/